• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1030-1039
• /
• 2006

A high power and high gain Doherty amplifier is designed by using embedded driver amplifiers in the final stage. The operational characteristics of a two-stage Doherty amplifier are analyzed, as a function of the two-stage peaking amplifier gate biases. The driver stages and final output stages are implemented using two single-ended MRF21045s and a single push-pull packaged MRF5P21180, respectively. This two-stage Doherty amplifier demonstrated 27 dB gain with a PAE of 23 % at 15 W average output power.

• Journal of Korean Academy of Nursing
• /
• v.30 no.5
• /
• pp.1265-1278
• /
• 2000

This study was carried out to assess the perception of decisional balance of Korean subjects about 4 health behaviors and to identify the influencing factor of decisional balance for exercise acquisition, smoking cessation, mammography screening and Kegel's exercise acquisition. All are representative health behaviors nurses can intervene in Korea based on the Transtheoretical model. Convenient samples of 2,484 subjects (191; exercise, 169; smoking cessation, 1903; mammography screening and 221; Kegel's exercise) were selected from cities and counties over 9 provinces throughout Korea, and the data was collected from January 1, 1999 to February 29, 2000. The research instrument were the Decisional Balance Measure for Exercise (Marcus & Owen., 1992), Smoking Cessation (Velicer et al., 1985), Mammography Screening (Rakowski et al.,1992) and Kegel Exercise (Lim, 1999) and Stage of Change Measure for Exercise (Marcus et al, 1992), Smoking Cessation (DiClemente et al., 1991), Mammography Screening (Rakowski et al.,1992) and Kegel's Exercise (Lim, 1999). The data was analyzed by the SAS Program. The results are as follows; 1. According to the stage of change measure, 2,484 subjects were distributed in each stage of change for four health behaviors: 1,233 subjects (49.8%), 745 subjects (30.2%), 113 subjects (4.7%), 156 subjects (6.5%), and 216 (8.7%) belonged to the pre- contemplation stage, contemplation stage, preparation stage, action stage and maintenance stage. They were all series of stages of change in their efforts to do health behavior. 2. Factor analysis identified 3 factors (1 of Pros, 2 of Cons) for the exercise, 4 factors for smoking cessation (2 of Pros, 2 of Cons), 2 factors (1 of Pros, 1 of Cons) for the mammogram screening and 2 factors (1 of Pros, 1 of Cons) for Kegel's exercise of decisional balance. 3. The analysis of variance and multiple comparison analysis showed that for all 4 samples, the Cons of changing the problem behaviors outweighed the Pros for subjects who were in the pre- contemplation stage, The opposite was true for subjects in action and maintenance stage. 4. Through the discriminant analysis, it was found that one factor of Pros for exercise, one factor of Cons for smoking cessation, 1 factor of Cons for mammogram screening and one factor of Cons for Kegel's exercise were the more influencing factors, than others in discriminating the stages of change. Results are consistent with the applications of the Transtheoretical model, which have been used to understand how people change health behaviors. This results provide some evidence that subject's report of his/her health behavior corresponds to beliefs about usefulness of related health behaviors. The results of this study have implications for patients' health education and health intervention strategies. The findings of this study give useful information for nursing educators for 4 health behaviors, especially the factors relating to decision making in the different stages of change.

• Korean Journal of Veterinary Research
• /
• v.38 no.1
• /
• pp.107-117
• /
• 1998

The cultivation for development of Ascaris suum from the second-stage larvae($L_2$) embryonated egg and the third-stage of rat-derived larvae($L_3$) recovered from lung of rats were performed to use the screening test of anthelmintics in vitro. The preparations of larvae for cultivation were that the artificially-hatched $L_2$ incubated the embryonated eggs of Ascaris suum in 0.1% formalin solution at $25^{\circ}C$ for 28 days and the rat-derived larvae($L_3$) recovered from the lung of rat infected with the embryonated eggs of Ascaris suum on 7 days after infection(DAI). The cultivation for development of Ascaris suum from the embryonated eggs($L_2$) and the rat-derived larvae($L_3$) for 14 days in RPMI medium 1640(with 5% bovine calf serum) were as follows : 1. The sizes of the liberated larvae($L_2$) which were artificially hatched from embryonated eggs with glass beads(diameter 5mm) were $190{\sim}250{\mu}m$ on 1 days in culture(DIC). The second-stage larvae were molted into third-stage larvae(early $L_3$; $250{\sim}300{\mu}m$) and the features of these larvae were first observed such as cephalic cuticle, esophageal lumen and anus etc. on 5 DIC and the sizes of late third-stage larvae were $250{\sim}450{\mu}m$ on 10 DIC. The sizes of early fourth-stage larvae($L_4$) were $500{\sim}700{\mu}m$ and the features of these larvae were more pronounced in internal organs on 15 DIC. 2. The sizes of third-stage larvae($L_3$) recovered from the lung of rats were $1,340{\sim}1,370{\mu}m$ and the feartures of cephalic cuticle, esophageal lumen, intestine, rectum, anus were visualized by inverted microscope on 1 DIC. The fourth-stage larva($L_4$) completed by third ecdysis were recognizable and sizes of early fourth-stage larvae were developed as $1,400{\sim}2,200{\mu}m$ on 5 DIC. The sizes of middle fourth-stage of larva were $1,900{\sim}2,300{\mu}m$ and the thickened epithelial rectum was observed on 10 DIC. The rectum and anus of late fourth-stage larva($L_4$ $2,500{\sim}3,200{\mu}m$) had developed completely in RPMI medium 1640 on 15 DIC.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.325-336
• /
• 2009

The purpose of this study was to investigate the eruption pattern of the mandibular first molar in sagittal, frontal and horizontal views using the cone beam CT scanning. CT images were obtained from healthy 83 children (42 boys, 41 girls) between 3 to 10 years of age with a normal dentition according to Nolla stage. 1. In the frontal and horizontal view, the intermolar width decreased continuously with stage and slightly increased at the last stage. 2. In the sagittal and frontal view, eruption distances from occlusal plane were observed the largest change between stage 5 and 7. 3. In the horizontal and sagittal view, mandibular first molar from distal surface of primary second molar moved distally between stage 4 and 6. 4. In the sagittal view, angle from occlusal plane to mesio-distal axis increased between stage 4 and 8. 5. In the frontal view, angle from occlusal plane to bucco-lingual axis increased continuously during all stage. 6. In the horizontal view, angle from midsagittal plane to long axis increased between stage 5 and 8.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.84-99
• /
• 2001

This study was carried out to acquire basic data necessary for the use of rice-straw chemical pulp. It investigated the proper bleaching conditions when rice-straw chemical pulp(alkaline sulfite-${Na_2}{S_2}{O_4}$) was bleached using the various kinds of bleaching agents by the two-stages bleaching methods. And, physical properties of pulps bleached with eight kinds of two-stages bleaching methods were tested. The results of this study were as follow; 1. The first-stage bleaching was conducted under the proper conditions with chlorine(C). And then, the proper conditions related to the calcium chlorite(H), hydrogen peroxide(P) and sodium hydrosulfite(Y) bleaching as the second-stage bleaching were investigated. The proper conditions of CH stage were determined to be 0.3% concentration of calcium chlorite, $30^{\circ}C$ of reaction temperature and 20min. of reaction time. For CP stage, the proper conditions of concentration of hydrogen peroxide, reaction temperature and reaction time were 1.5%, $60^{\circ}C$ and 90min., respectively. And for CY stage, the proper conditions were 0.5% concentration of sodium hydrosulfite, $40^{\circ}C$ of reaction temperature and 90min. of reaction time. 2. The first-stage bleaching was conducted under the proper conditions with chlorine dioxide(D). And then, the proper conditions related to the calcium chlorite(H), hydrogen peroxide(P) and sodium hydrosulfite(Y) bleaching as the second-stage bleaching were investigated. The proper conditions of DH stage were determined to be 0.5% concentration of calcium chlorite, $25^{\circ}C$ of reaction temperature and 5min. of reaction time. For DP stage, the proper conditions of concentration of hydrogen peroxide, reaction temperature and reaction time were 1.0%, $70^{\circ}C$ and 90min., respectively. And for DY stage, the proper conditions were 0.3% concentration of sodium hydrosulfite, $50^{\circ}C$ of reaction temperature and 20min. of reaction time. 3. The first-stage bleaching was conducted under the proper conditions with calcium chlorite(H). kAnd then, the proper conditions related to the hydrogen peroxide(P) and sodium hydrosulfite(Y) bleaching as the second-stage bleaching were investigated. The proper conditions of HP stage were determined to be 0.3% concentration of hydrogen peroxide, $30^{\circ}C$ of reaction temperature and 60min. of reaction time. For HY stage, the proper conditions of concentration of sodium hydrosulfite, reaction temperature and reaction time were 2.5%, $60^{\circ}C$ and 30min., respectively. 4. When the rice-straw chemical pulps were bleached with eight kinds of two-stages bleaching methods in the proper conditions mentioned above, respectively, the final brightnesses after CH, CP, CY, DH, DP, DY, HP, and HY bleachings were 62.0, 74.3, 61.4, 58.9, 66.9, 62.9, 50.4 and 60.1, respectively. And strengthes of pulps bleached with DP and DH methods were comparatively higher than those of pulps bleached with other bleaching methods.

• Fire Science and Engineering
• /
• v.32 no.2
• /
• pp.7-16
• /
• 2018

In this study, the previous design fire curve for fire simulation was modified and re-suggested. Numerical simulations with the FDS and CFAST were performed for the n-heptane and n-octane pool fires in the ISO 9705 compartment to evaluate the prediction performances of the previous 1-stage and modified 2-stage design fire curves. The numerical results were compared with the experimental temperature and concentrations of $O_2$ and $CO_2$. The FDS and CFAST simulations with the 2-stage design fire curve showed better prediction performance for the variation of temperature and major species concentration than the simulations with 1-stage design fire curve. Especially, the simulations with the 2-stage design fire curve agreed with the experimental temperature more reasonably than the results with the 1-stage design fire curve. The FDS and CFAST simulations showed good prediction performance for the temperature in the upper layer of compartment and the results with the FDS and CFAST were similar to each other. However, the FDS and CFAST showed poor and different prediction performance for the temperature in the lower layer of compartment.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.3
• /
• pp.339-346
• /
• 1999

Background : Non-small cell lung carcinoma is a common tumor with a poor prognosis. Of all malignancies, it is the main cause of death for male and female patients in the Western world. Resection remains the most effective treatment when feasible. Accurate description and classification of the extent of cancer growth are important in planning treatment, estimating prognosis, evaluating end results of therapy, and exchanging information on human cancer research. Until effective systemic therapy is available for non-small cell lung cancer, development of new treatment strategies depends on knowledge of the end results achieved for carefully staged groups of patients in the lung cancer populations. For these reasons, we investigated the survival rate in radically resected non-small cell lung cancer patients by newly revised staging system adopted by the American Joint Committee on Cancer and the Union Internationale Contre le Cancer. Methods: Clinical, surgical-pathologic and follow-up informations on 84 consecutive, previously untreated, patients who received their primary treatment for non-small cell lung cancer were investigated. Staging definitions for the T(primary tumor), N(reginal lymph node), and M(distant metastasis) components were according to the International Staging System for Lung Cancer. Death from any causes was the primary target of the evaluation. Results: The median survival rates were as follows; stage I ;79.1 months, stage II ;47.3 months, stage IIIa; 22.7 months, stage IIIb; 16.1 months, and stage IV;15.2 months versus newly revised stage Ia;58.5 months, stage I b;76.0 months, stage IIa; not available, stage IIb;43.0 months, stage IIIa;22.5 months, stage IIIb; 16.1 months, and stage IV;15.2 months. The survival rates were not significantly different between old and newly revised staging system. Cumulative percent survival at 36months after treatment was 100% in stage Ia, 80% in stage Ib, not available in stage IIa, 26 % in stage IIb, and 21 % in stage m a respectively. Conclusions: Although these data were not significantly different statistically, the newly revised lung cancer staging system might be more promising for the accurate evaluation of the prognosis in the non-small cell lung caner patients.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.6
• /
• pp.1021-1027
• /
• 1997

$CO_2$production in fermentation of dongchimi was measured and interrelated with changes in pH and titratable acidity. The effects of salt content and temperature on $CO_2$production rate were analysed. Fermentation of dongchimi showed drastic pH decrease in early stage and subsequent levelling off around 3.9, with linearly increased acidity up to 0.3~0.4% optimum quality. $CO_2$production of dongchimi could be analysed to consist of two consecutive stages of constant rate. The first stage $CO_2$production of higher rate moved to the second stage of lower rate when acidity rose beyond 0.3%. When compared to those of 1 and 2% salt content, dongchimi of 3% salt showed lower $CO_2$production rate in the 1st stage and slower acidity change through the whole fermentation period. However, it resulted in the product of highest $CO_2$accumulation at optimal ripeness because of consistent $CO_2$production of longer 1st stage period and relatively high $CO_2$production rate in 2nd stage. $CO_2$production depended on temperature less compared to acidity change(activation energy: 57.3 and 44.3kJ/mol for $CO_2$production of 1st and 2nd stages, respectively; 79.3kJ/mol for acidity change), which means higher ratio of $CO_2$production rate relative to acidity increase at lower temperature. Slower increase in acidity at low temperature also was shown to extend the period of 1st stage $CO_2$production. Therefore, low temperature fermentation was effective in producing the high $CO_2$content dongchimi at adequate acidity, which is desirable organoleptically.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.383-399
• /
• 1998

Tooth development is usually described in four stages such as bud stage, cap stage, bell stage and crown stage. Exact time of appearance of tooth primordia is different among reports, and up to now there is no timetable regarding initial tooth development. To understand the congenital malformations and other disorders of the orofacial region, there is a need to establish a standard timetable on early tooth development. Till now, studies on the tooth development were mainly on later fetuses, and only few reports on early stage. Also, there were no reports on the time when bud stage turns to cap stage, and cap stage to bell stage. In this study, external morphology of face and the early development of the tooth, and transition of bud stage to cap stage, cap stage to bell stage were studied using 27 staged human embryos and 9 serially sectioned human fetuses. The results are as follows: 1. Mandibular region was formed by union of both mandibular arch at stage 15, and maxillary region by union of maxillary arch, medial nasal prominence, and intermaxillary segment at stage 19. 2. Ectodermal thickening which represents the primordia of tooth appeared in mandibular region at stage 13, and maxillary region at stage 15. 3. Bud stage began from mandibular primary central incisor at stage 17, and maxillary primary central incisor at stage 18. And the sequence of appearance was in the mandibular primary lateral incisor at stage 19, maxillary primary lateral incisor at stage 20, mandibular primary canine at stage 22, maxillary primary canine and primary first molar at stage 23, madibular primary first molar and maxillary primary second molar at 9th week, and mandibular primary second molar at 10th week of development. 4. Cap stage began from the primary anterior teeth at 9th week, and primary second molar still had the characteristics of cap stage at 12th week of development. 5. Transition to bell stage started from the primary anterior teeth at 12th week, and primary second molar started at 16th week of development. 6. Trnasition to crown stage started from primary anterior teeth at 16th week, and primary second molar at 26th week of development.

• Journal of the Korean Ceramic Society
• /
• v.22 no.6
• /
• pp.5-8
• /
• 1985

Graphite has been oxidized to graphite hydrogen sulfate in concentrated $H_2SO_4$. Anodic oxidation and chemical oxidation of graphite in $H_2SO_4$ generally leads to the formation of intercalation compounds of the ionic salt type through incorporation of $H_2SO_4^-$ions and $H_2SO_4$ molecules into the graphite. Several other reactions also accur at various points of the charging cycle. But there is no satisfactory kinetics and mechanism of intercalationin graphite. We have studied them with anodic oxidation and chemical oxidation. We found six distinct phenomena between 2nd stage and 1st stage in chemical oxidation. We examined them in detail by the following in the measurements electrical oxidation. X-ray diffractions UV-Vis spectroscopy density measurements. We could obtained a equation for kinetic according to the reaction rate from this results and mechanism of intercalation between 2nd stage and 1st stage with hydrogen sulfate in graphite. Three thesis were written for the mechanism of intercalation compounds in graphite with hydrogen sulfate ; first thesis is anodic oxidation second thesis is chemical oxidation and definition of transit phase between 2nd etc the third thesis is the kinetic mechanism of intercalation compounds in graphite with Hydrogen sulfate. This thesis is the first paper among three thesis as anodic oxidation.