• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.174-174
• /
• 2003

Highly (111)-oriented PZT [Pb(Zrl-xTix)O3] thin films in the Zr-rich rhombohedral phase-field were successfully fabricated on Pt(111)/Ti/SiO2/Si substrates by combining PLD method with sol-gel process. These highly (111)-oriented films can be used as model systems for polarized Raman scattering study of PZT in the rhombohedral-Phase field because the (111)-direction is the principal off-center axis of the rhombohedral ferroelectricity. For this purpose, we have fabricated PZT films employing two distinctive compositions : one with Zr/Ti = 90/10 (abbreviated as PZT90/10) and the other with Zr/Ti= 60/40 (PZT60/40). The PZT90/10 film belongs to the octahedrally distorted FR(LT) phase with a cell-doubled structure, whereas the PZT60/40 is in the high-temperature FR(HT) phase-field at room temperature. To clearly separate E(TO) phonon modes from Al(TO) modes of the (111)-oriented rhombohedral film, we have suitably devised Z(X,Y)Z and Z(X,X)Z backscattering geometries for E(TO) and Al (TO), respectively. The polarized scattering experiment demonstrated that both types of (111)-oriented rhombohedral films closely followed the Raman selection rule.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.623-631
• /
• 2012

In this paper, a digital controller design procedure is presented for single-phase voltage-doubler boost rectifiers (VDBR). The model derivation of the single-phase VDBR is performed in the s-domain. After that the simplified equivalent z-domain models are derived. These z-domain models are utilized to design the input current and the output dc-link voltage controllers. For the controller design in the z-domain, the traditional K-factor method is modified by considering the nature of the digital controller. The frequency pre-warping and anti-windup techniques are adapted for the controller design. By using the proposed method, the phase margin and the control bandwidth are accurately achieved as required by controller designers in a practical frequency range. The proposed method is applied to a 2.5 kVA single-phase VDBR for Uninterruptible Power Supply (UPS) applications. From the simulation and the experimental results, the effectiveness of the proposed design method has been verified.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.941-950
• /
• 2001

A study of counter-current two-phase flow in narrow rectangular channels has been performed. Two-phase flow regimes were experimentally investigated in a 760mm long and 100mm wide test section with 2.0 and 5.0mm gap widths. The resulting flow regime maps were compared with the existing transition criteria. The experimental data and the transition criteria of the models showed relatively good agreement. However, the discrepancies between the experimental data and the model predictions of the flow regime transition become pronounced as the gap width increased. As the gap width increased the transition gas superficial velocities increased. The critical void fraction for the bubbly-to-slug transition was observed to be about 0.25. The two-phase distribution parameter for the slug flow was larger for the narrower channel. The uncertainties in the distribution parameter could lead to a disagreement in slug-to-churn transition between the experimental findings and the transition criteria. For the transition from churn to annular flow the effect of liquid superficial velocity was found to be insignificant.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2782-2791
• /
• 1996

The effective longitudinal shear modulus(LSM) of continuous composites is studied theoretically and numerically using 3-phase unit cell model. Circular, hexagonal and rectangular shapes of reinforced fiber are considered to predict the shear modulus as a function of elastic modulus of each phase and volume fraction of interphase and reinforced fiber. It is found that rectangular fiber shape in low fiber volume fraction($v_f$<30%) and circular fiber shape in high volume fraction($v_f$>40%) shows the higher longitudinal shear modulus. Also the obtained values of LSM for rectangular array and by numerical analysis are higher than those of hexagonal array and by theoretical analysis respectively. The reinforcing effects of interphase are more significant in cases of higher fiber volume fraction and circular fiber shape. Not only the spatial distribution and shape of reinforcing fiber but also the volume of interphase have a pronounced effects on the overall LSM. It is also found that the tangent moduous of 2-and 3-phase polymer matrix composites is insensitive to the shape and distribution of reinforcing fibers.

• 대한화학회지
• /
• 제32권2호
• /
• pp.113-121
• /
• 1988

역상 액체 크로마토그래피에 의한 방향족 슬폰산 및 카르복시산들의 머무름 기구와 분리를 브롬화 도데실트리메틸 암모늄(DTAB)을 포함하는 이동상에서 연구하였다. 머무름 기구는 DTAB가 정지상에 일차층을 형성하고 반면 음이온 시료와 이동상에 존재하는 다른 공존 음이온들이 경쟁적으로 이차층을 형성하는 이온-상호작용 모델임을 확인하였다. 시료들의 용량인자들은 pH, 여러 유기 용매들의 농도, 이동상에 존재하는 공존 음이온 및 시료의 작용기 등 여러 인자들에 의해 영향을 받았다. 그리고 몇 가지 유기 혼합시료들을 최적 조건하에서 상호 분리를 시도하였다

• 가정과삶의질연구
• /
• 제24권6호
• /
• pp.33-45
• /
• 2006

The purpose of this study was to find the characteristics of the housing needs of apartment purchasers in derision-making steps. The survey was took place from June to July, 2003 in the Daegu area. The data were collected from 1,187 married women using questionnaires and reponses were analyzed by SPSS Window Program. The results were as follows : 1. In the phase when housing problems are recognized the motives for moving were related to the floor space of the housing unit and the residential environment. 2. In the phase of acquiring information on apartments, the basis of the informations was mostly collected through conversations at model houses, from relatives, experts and real estate agents. 3. In the phase of considering alternative plans for apartment purchases, the factors considered were convenient interior space composition and educational environment for children. 4. In the phase of apartment purchase, the important factors was input from relatives and experts. 5. In the phase of post-purchase evaluation most discontent was related to privacy issues, interior space composition, and educational environment for children.

• Nuclear Engineering and Technology
• /
• 제37권6호
• /
• pp.525-536
• /
• 2005

The interfacial area transport equation dynamically models the changes in interfacial structures along the flow field by mechanistically modeling the creation and destruction of dispersed phase. Hence, when employed in the numerical thermal-hydraulic system analysis codes, it eliminates artificial bifurcations stemming from the use of the static flow regime transition criteria. Accounting for the substantial differences in the transport mechanism for various sizes of bubbles, the transport equation is formulated for two characteristic groups of bubbles. The group 1 equation describes the transport of small-dispersed bubbles, whereas the group 2 equation describes the transport of large cap, slug or chum-turbulent bubbles. To evaluate the feasibility and reliability of interfacial area transport equation available at present, it is benchmarked by an extensive database established in various two-phase flow configurations spanning from bubbly to chum-turbulent flow regimes. The geometrical effect in interfacial area transport is examined by the data acquired in vertical fir-water two-phase flow through round pipes of various sizes and a confined flow duct, and by those acquired In vertical co-current downward air-water two-phase flow through round pipes of two different sizes.

• 한국콘텐츠학회논문지
• /
• 제7권2호
• /
• pp.11-20
• /
• 2007

AAM은 얼굴 윤곽 검출에 잘 적용되어 왔으나 초기값에 민감하다는 특성을 가지고 있다. 본 논문에서는 점진적 AAM을 이용한 얼굴 윤곽 검출 방법을 제안한다. 제안한 방법은 얼굴 모델 구성 및 관계 추출 단계와 얼굴 윤곽 검출 단계의 2단계로 구성된다. 얼굴 모델 구성 및 관계 추출 단계에서는 먼저 얼굴 내부 영역만으로 구성된 얼굴 내부 AAM 모델 구성과 얼굴 전체 영역으로 구성된 얼굴 전체 AAM 모델 구성을 수행한 후에, 이후 얼굴 내부 AAM 모델 파라미터 벡터와 얼굴 전체 AAM 모델 파라미터 벡터간의 관계 행렬을 추출한다. 얼굴 윤곽 검출 단계는 2단계 절차로 수행된다. 먼저 새로 입력되는 얼굴 이미지에 대해 얼굴 내부 AAM 모델을 맞추어 얼굴 내부에 대한 특징 파라미터 벡터를 구한다. 이후 얼굴 모델 구성 및 관계 추출 단계에서 구한 관계 행렬과 첫 단계에서 구한 얼굴 내부 특징 파라미터 벡터를 이용하여 얼굴 전체 AAM 특징 파라미터 벡터에 대한 초기값을 추정하고 이를 이용하여 새로 입력되는 얼굴 이미지에 대해 얼굴 전체 AAM 모델을 맞추어 전체 얼굴 윤곽 검출을 수행한다. 실험을 통해 제안된 점진적 AAM 기반 얼굴 윤곽 검출 방법이 자세, 얼굴 배경 등에 대해 기존 기본 AAM 기반 얼굴 검출 방법보다 더 강인한 것으로 확인되었다.

• Asian Journal of Atmospheric Environment
• /
• 제8권1호
• /
• pp.59-68
• /
• 2014

The Fukushima nuclear accident in 2011 had an extensive impact on the national electricity plans. This paper outlines alternative electricity scenarios that meet the goals of nuclear phase-out and greenhouse gas (GHG) emission reduction. This paper also analyzes the results of each scenario in respect to the electricity mix, GHG emissions, costs and employment effects. The Long-range Energy Alternatives Planning system (LEAP) model was used to simulate the annual electricity demand and supply system from 2011 to 2030. The reference year was 2009. Scenarios are reference (where existing plans are continued), A1, A2, B1, B2, and C2 (where the levels of demand management and nuclear phase-out are different). The share of renewable energy in the electricity mix in 2030 for each scenario will be increased from about 1% in 2009 to 8% in the reference scenario and from 11% to 31% in five alternative scenarios. Total cumulative cost increases up to 14% more than the reference scenario by replacing nuclear power plants with renewable energy in alternative scenarios could be affordable. Deploying enough renewable energy to meet such targets requires a roadmap for electricity price realization, expansion of research, development and deployment for renewable energy technologies, establishment of an organization dedicated to renewable energy, and ambitious targets for renewable energy.

• 전자공학회논문지SC
• /
• 제49권4호
• /
• pp.78-89
• /
• 2012

SR 모터의 발생토크는 비선형성이 심해서 토크리플을 최소화하는 기준전류명령을 결정하는 것이 매우 어렵다. 본 논문에서는 반복학습제어 방법을 이용하여 계산적으로 효율적인 SR 모터의 토크리플을 최소화하는 기준전류명령을 구하는 방법을 제안한다. 토크리플을 최소화하는 기준전류명령은 2차원 순람표(look-up table) 형태로 결정된다. 제안된 반복학습제어 방법은 토크모델을 이용하지 않기 때문에 모델오차에 대한 영향이 없고 정밀도가 높으며 계산적으로도 간단한다. 컴퓨터 시뮬레이션을 통해 제안된 방법이 효과적으로 동작됨을 입증한다.