• New & Renewable Energy
• /
• v.2 no.4 s.8
• /
• pp.12-18
• /
• 2006

풍력터빈 풍동시험의 경우 모델 축소에 의한 레이놀즈 수 감소가 풍력터빈 성능에 미치는 영향이 적절히 고려되어야 한다. 본 연구를 통해 수치해석과 축소모델 풍동시험을 통해 모델 축소효과를 파악하여 이를 적절히 보상하는 기법을 개발하고자 한다. 이를 위해 풍력터빈 형상 및 실물모델 시험데이터가 공개되어 있는 NREL Phase VI 모델을 표준모델로 선정하여 수치해석 및 풍동시험을 수행하였다. 풍동시험은 KARI LSWT에서 2006. 10에 수행되었으며, 블레이드 끝단 속도를 실물 모델과 일치시켰으며 시험부 유속은 0$\sim$25m/s, 블레이드 설치각은 3도 조건을 기준조건으로 사용하였다. 축소모델 시험결과 최대토크는 약 10% 정도 감소현상을 보이고 있다.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.4
• /
• pp.5-20
• /
• 2022

To analyze the flow and density variations in debris flows, a two-phase finite volume model simplified with momentum equations was constructed in this study. The Hershel-Buckley rheology model was employed in this model to account for the internal and basal friction of debris flows and was utilized to analyze complex topography and entrainments of basal soil beds. In order to numerically solve the debris flow analysis model, a finite volume model with the Harten-Lax-van Leer-Contact method was used to solve the conservation equation for the debris flow interface. Case studies of circular dam failure, non-Newtonian fluid dam failure, and multiple debris flows were analyzed using the proposed model to evaluate shock absorption capacity, numerical isotropy, model accuracy, and mass conservation. The numerical stability and correctness of the debris flow analysis of this analysis model were proven by the analysis results. Additionally, the rate of debris flow with various rheological properties was systematically simulated, and the effect of debris flow rheological properties on behavior was analyzed.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.9-12
• /
• 2001

The microstructure evolution and the peritectic solidification of Sm$Ba_{2}$$Cu_{3}$ $O_{7-\delta}$ superconducting materials during the isothermal annealing were studied over the temperature range 1030-$1060^{\circ}C$ The faceted growth of the peritectic phase and its dependence upon Sm-diffusion in the liquid phase are discussed. A growth model is proposed to explain the growth shape of Sm123 crystals.

• Journal of Korean Society for Quality Management
• /
• v.22 no.2
• /
• pp.33-40
• /
• 1994

Most software reliability models and other methods attempt to estimate some measures based on its fault history. There are several phases of the software life cycle including testing phase. We can propose it's stopping rule to decide when to stop the testing and pass it on to the next phase by considering the detailed structure of software and calculating the failure rate when each fault was detected. Downs (1985) proposed a method which was developed for estimating the failure rate applicable only to two-level profiles. In this paper, I extended to profiles involving more levels.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.290-297
• /
• 2009

A two-phase (gas and liquid) flow analysis solver, named CUPID, has been developed for a realistic simulation of transient two-phase flows in light water nuclear reactor components. In the CUPID solver, a two-fluid three-field model is adopted and the governing equations are solved on unstructured grids for flow analyses in complicated geometries. For the numerical solution scheme, the semi-implicit method of the RELAP5 code, which has been proved to be very stable and accurate for most practical applications of nuclear thermal hydraulics, was used with some modifications for an application to unstructured non-staggered grids. This paper is concerned with the effects of interpolation schemes on the simulation of two-phase flows. In order to stabilize a numerical solution and assure a high numerical accuracy, the second-order upwind scheme is implemented into the CUPID code in the present paper. Some numerical tests have been performed with the implemented scheme and the comparison results between the second-order and first-order upwind schemes are introduced in the present paper. The comparison results among the two interpolation schemes and either the exact solutions or the mesh convergence studies showed the reduced numerical diffusion with the second order scheme.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.1
• /
• pp.14-23
• /
• 2010

A numerical model was developed for simulating a three-dimensional multilayer hydrodynamic and thermodynamic model in domains with irregular bottom topography. The model was designed for examining the interactions between flow and topography. The model was based on the three-dimensional Navier-Stokes equations and was solved using the fractional step method, which combines the finite difference method in the horizontal plane and the finite element method in the vertical plane. The numerical techniques were described and the model test and application were presented. For the model application to the northern part of Ariake Sea, the hydrodynamic and thermodynamic results were predicted. The numerically predicted amplitudes and phase angles were well consistent with the field observations.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.2
• /
• pp.69-73
• /
• 2016

We use the non-stationary three dimensional two-layer outer gap model to explain gamma-ray emissions from a pulsar magnetosphere. We found out that for some pulsars like the Geminga pulsar, it was hard to explain emissions above a level of around 1 GeV. We then developed the model into a non-stationary model. In this model we assigned a power-law distribution to one or more of the spectral parameters proposed in the previous model and calculated the weighted phase-averaged spectrum. Though this model is suitable for some pulsars, it still cannot explain the high energy emission of the Geminga pulsar. An Inverse-Compton Scattering component between the primary particles and the radio photons in the outer magnetosphere was introduced into the model, and this component produced a sufficient number of GeV photons in the spectrum of the Geminga pulsar.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.6
• /
• pp.223-226
• /
• 2008

$Ge_1Se_1Te_2$ chalcogenide amorphous materials was prepared by the conventional melt-quenching method. Samples were processed bye-beam evaporator systems and RF-sputtering systems. Phase change characteristics were analyzed by measuring glassification temperature, crystallization temperature and density of bulk material. The thermal characteristics were measured at the temperature between 300 K and 700 K, and the electrical characteristics were studied within the range from 0 V to 3 V. The obtained results agree with the electrothermal model for Phase-Change Random Access Memory.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.145-148
• /
• 2000

Large-scale resolution of epoxides by the yeast Rhodotorula glutinis was demonstrated in an aqueous/organic two-phase cascade membrane bioreactor. Due to the chemical instability and low solubility of epoxides in aqueous phases, an organic solvent was introduced into the reaction mixture in order to enhance resolution of epoxide. A cascade hollow-fiber membrane bioreactor was used (i) to minimize the toxicity of organic solvents towards the epoxide hydrolase of Rhodotorula glutinis, and (ii) to remove inhibitory amounts of formed diol from the yeast cell containing aqueous phase. Dodecane was selected as a suitable solvent and 1,2-epoxyhexane as a model substrate. By use of this membrane bioreactor, highly concentrated (0.9 M in dodecane) enantiopure (>98% ee) (S)-1,2-epoxyhexane (6.5 g, 30% yield) was obtained from its racemic mixture.

• Wind and Structures
• /
• v.17 no.2
• /
• pp.185-202
• /
• 2013

The goal of this study was to investigate the vulnerability of roof tile systems and metal shutters to roof tile debris. Three phases addressed the performance of tile roof systems and metal shutters impacted by roof tile debris. The first phase experimentally evaluated the tile fragment size and quantity generated by a tile striking a tile roof system. The second phase experimentally quantified the puncture vulnerability of common metal panel shutter systems as a function of tile fragment impact speed. The third phase provided context for interpretation of the experimental results through the use of a tile trajectory model. The results provide supporting evidence that while metal panel window shutters provide significant protection against a prevalent form of windborne debris, these systems are vulnerable to tile fragment puncture in design level tropical cyclones. These findings correlate with field observations made after Hurricane Charley (2004).