• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.2
• /
• pp.396-406
• /
• 2007

In this paper, we proposed development of improved model reduction and design of hierarchical controller using reduction model. The model reduction is considered that it is the transient response and the steady-state response through the use of nyquist curve. The hierarchical controller selected tuning of PID controller to ensure specified gain and phase margin and hybrid smith-predictor fuzzy controller using reduction model. Simulation examples are given to show the better performance of the proposed method than conventional methods.

• Journal of Technology Innovation
• /
• v.2 no.1
• /
• pp.116-141
• /
• 1994

This paper presents a model for R&D project selection and evaluation system design developed through literature review. The model emphasizes the fitness between the five elements of the system : evaluation phase and purpose, personnel and organization, evaluation critiria and decision model, evaluation form and procedure, and projects. The model was applied in real situation as a test case. The important findings are that a good project selection and evaluation model contributes only partially to the effectiveness of the project selection and that system development and implementation activity is a dynamic and multi-facetted learning process.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.301-311
• /
• 1994

The growth of amorphous and first crystalline phase, and phase sequence by solid state reaction were examined in Co/Si multilayer thin films by DSC and XRD. The experimental results were compared with the results expected by effective driving force models, PDF and effective heat of formation models.Amorphous phase growth was not observed in Co/Si system and it was consistent with the predicted result by effective driving force. It was observed that the first crystalline phase is CoSi. According to the PDF and effective heat of formation models, the first crystalline phases were CoSi and $CO_2Si$, respectively. The experiemental results were coincident with the PDF model considering structure factors. In case of the atomic concentration ratios of 2Co : 1Si and 1Co : 2Si, the phases sequences were $CoSi\to Co_2Si$ and $CoSi \to Co_2Si \to CoSi \to CoSi_2$, respectively and it was analysized through the effective heat of formation model. The formations of CoSi, $CO_2Si$ and $COSi_2$ in initial stage were controlled by nucleation and the activation energies for the nucleation of three phases were 1.71, 2.34 and 2.79eV.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.4
• /
• pp.120-127
• /
• 2006

An experimental study was carried out in order to investigate the effects on the fore- and hind-wings of a dragonfly-type model. A model with two pairs of wing was developed to measure the lift and thrust of a dragonfly-type model. The fore-wing and hind-wing had incidences angle of $0^{\circ}\;and\;10^{\circ}$. The freestream velocity is 1.6m/sec and the corresponding chord Reynolds number was $Re=2.88{\times}10^3$. Also, these experiments were carried out with a phase difference of $90^{\circ}$ between the fore- and hind-wing, aerodynamic forces caused by fore-wing only and two pairs of wings were investigated according to the reduced frequency. The results show that the model with fore-wings only generates a thrust component; however, the dragonfly-type model with hind-wings with an incidence angle of $10^{\circ}$ generates a drag component. The total drag is also increased with reduced frequency due to the increased lift of hind-wings.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.1-10
• /
• 2007

In this paper, we proposed development of improved model reduction and design of common controller using reduction model. The Algorithm of improved model reduction considered the transient response and the steady-state response in response curve. The generalized controller is designed not only to ensure specified phase margin and iso-damping property also optimized smith-predictor controller about real model using reduction model. Simulation examples are given to show the better performance of the proposed method than convention methods.

• Nuclear Engineering and Technology
• /
• v.28 no.3
• /
• pp.299-310
• /
• 1996

A two-step approach has been used to obtain a new criterion for the onset of slug formation : (1) In the first step, a more general expression than the existing models for the onset of slug flow criterion has been derived from the analysis of singular points and neutral stability conditions of the transient one-dimensional two-phase flow equations of two-fluid model. (2) In the second step, introducing simplifications and incorporating a parameter into the general expression obtained in the first step to satisfy a number of physical conditions a priori specified, a new simple criterion for the onset of slug flow has been derived. Comparisons of the present model with existing models and experimental data show that the present model agrees very closely with Taitel & Dukler's model and experimental data in horizontal pipes. In an inclined pipe ($\theta$ =50$^{\circ}$), however, the difference between the predictions of the present model and those of existing models is appreciably large and the present model gives the best agreement with Ohnuki et al.'s data.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.380-388
• /
• 2010

A thermal-hydraulic code, named CUPID, has been developed for the analysis of transient two-phase flows in nuclear reactor components. A two-fluid three-field model was used for steam-water two-phase flows. To obtain numerical solutions, the finite volume method was applied over unstructured cell-centered meshes. In steam-water two-phase flows, a phase change, i.e., evaporation of condensation, results in a great change in the flow field because of substantial density difference between liquid and vapor phases. Thus, two-phase flows are very sensitive to the local pressure that determines the phase change. This in turn puts emphasis on the accurate evaluation of local pressure gradient. This paper presents a new numerical scheme to evaluate the pressure gradient at cell centers on unstructured meshes. The results of the new scheme for a simple test function a gravity-driven cavity, and a wall boiling two-phase flow are compared with those of the previous schemes in the cupid code.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.4
• /
• pp.119-127
• /
• 2014

This study aims to determine whether or not the input output life cycle assessment (I-O LCA) model can be used to assess the carbon dioxide (CO2) emission of buildings in initial planning phase. To ensure this end, this study proposed I-O LCA model which is the simplified LCA model and Hybrid LCA model which is the detailed LCA model, and then assessed and compared the CO2 emission of six case projects (three apartment complexes and three educational facilities) using the two LCA model. The results of the case study showed that the CO2 emissions assessed by the I-O LCA is significantly similar to the CO2 emission assessed by the Hybrid LCA model. The similarity of results from both LCA models was 78.2-86.3% in apartment complexes and 59.9-84.8% in educational facilities. However, the CO2 emissions from I-O LCA model were smaller than the CO2 emissions from Hybrid LCA model in case study. Nevertheless, the case study showed that the I-O LCA model was capable of assessing the CO2 emission of buildings quite appropriately although the I-O LCA model is the simplified LCA model which considers only the construction cost. The I-O LCA model is expected to be a useful tool for assessing the CO2 emission of buildings in initial planning phase.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.1
• /
• pp.34-40
• /
• 1984

In this study, martensite-ferrite dual phase steel composed of martensite in hard phase and ferrite in soft phase is made as model material, and the difference of fatigue crack propagation behavior resulted from the structural size is investigated by fracture mechanics and microstructural method. The main results obtained are as follows; 1)Fatigue crack propagation rate is influenced by ferrite grain size. In other words, in the low .DELTA. K region fatigue crack propagation rate is decreased with decreasing of grain size but the difference of propagation rate resulted from the structural size is decreased as .DELTA.K is increased. 2)The above result is explained by the degree of crack arrest effect of second phase for fatigue crack propagation depending on the ratio of reversed plastic zone size to ferrite grain size.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.403-406
• /
• 2006

본 연구에서는 양극의 two-phase simulation 모델을 확립하고 GDL 물성과 작동조건이 전지성능에 미치는 영향에 대해 시행하였다. 모델로는 Multi-phase $mixture(M^2)$ 모델을 사용하였는데 이 모델은 각 상의 balance식을 하나의 mixture-phase식으로 통합하여 수학적 계산이 용이할 뿐만 아니라 실제 전지 성능에 매우 근사하여 신뢰성성도 확보할 수 있었다. 최적의 GDL 구조와 작동조건을 규명하기 위해 기체투과도, 접촉각, 기공도, 기체 공급가스 차이에 따른 전지 성능 분석을 시행하였는데 그 결과 모든 파라미터들이 증가할수록 비례적으로 전지 성능이 증가하였다. 기체 공급가스>기공도>>접촉각>기체투과도 순으로 전지에 미치는 영향이 큰 것으로 나타났다.