• Journal of Biomedical Engineering Research
• /
• v.15 no.2
• /
• pp.143-150
• /
• 1994

Wall shear rate or stress is believed to be a major hemodynamic variable influencing atherosclerosis and artery-graft anastomic intimal hyperplasia. The purpose of this study is to verify the effects of radial wall motion, artery-graft compliance and diameter mismatch, and impedance phase angle on the wall shear rate distribution near an end-to-end artery-graft anastomosis model. The results show that radial wall motion of the elastic artery model lowers the mean wall shear rates under pulsatile flow condition by 15 to 20 % comparing to those under steady flow condition at the same mean flow rate. Impedance phase angle seems to have small effects on the mean and amplitude of the wall shear rate distribution. In order to study the effects of compliance and diameter mismatch on the wall shear rates, two models are studied-Model I has 6% and Model I has 6% and Model II has 11% smaller graft diameter. Divergent geometry caused by diameter mismatch near the distal sites reduces the mean wall shear rates significantly, and this low shear region is believed to be prone to intimal hyperplasia.

• Interaction and multiscale mechanics
• /
• v.4 no.2
• /
• pp.155-164
• /
• 2011

The lattice strain evolution within polycrystalline solids is influenced by the crystal orientation and grain interaction. For multi-phase polycrystals, due to potential large differences in properties of each phase, lattice strains are even more strongly influenced by grain interaction compared with single phase polycrystals. In this research, the effects of the grain interaction and crystal orientation on the lattice strain evolution in a two-phase polycrystals are investigated. Duplex steel of austenite and ferrite phases with equal volume fraction is selected for the analysis, of which grain arrangement sensitivity is confirmed in the literature through both experiment and simulation (Hedstr$\ddot{o}$m et al. 2010). Analysis on the grain interaction is performed using the results obtained from the finite element calculation based on the model of restricted slip within crystallographic planes. The dependence of lattice strain on grain interactions as well as crystal orientation is confirmed and motivated the need for more in-depth analysis.

• The KIPS Transactions:PartD
• /
• v.11D no.2
• /
• pp.435-442
• /
• 2004

It is important to integrate an enterprise application for automating of the business process, which is responded by a flow of market environment. There are two categories of method that integrate enterprise applications. One is Synchronous Integration, and the other is Asynchronous Integration. EAI(Enterprise Application Integration) and Web service which of the asynchronous integration is focused in the automating method of the business process. After we construct the application integration for automating of the business process, we have to concern about managing of the business transaction. Many Organizations have proposed the process method of business transaction based on 2-phase commit protocol. But this method can't supply the phase that classify the transaction by transaction weight. In this paper, we propose an efficient method of transaction process for business transactions, which is composed by "Classify Phase" that classify transactions. We called this model "3-Phase Commit Method Applied by Classify Phase, " we design this model to manage an resource of enterprise efficiently. The proposed method is compared by the method based on 2-Phase commit that could be a problem of management the resource of enterprise, and the advantage of this method is certified to propose the solution of that problem.ion of that problem.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.4
• /
• pp.322-331
• /
• 2002

In this paper, a single-phase to three-phase PWM converter topology using a single-phase half-bridge PWM rectifier and a 2-leg inverter for low cost three-phase induction motor drives is proposed. In addition, the source voltage sensor is eliminated with a state observer which controls the deviation between the model current and the system current to be zero. The converter topology is of lower cost than the conventional one, which gives sinusoidal input current, unity power factor, dc output voltage control, bidirectional power flow and VVVF output voltage. The experimental results for V/F control of 3Hp induction motor drives have been shown.

• Journal of the Korean Institute of Gas
• /
• v.10 no.4 s.33
• /
• pp.1-5
• /
• 2006

With the rapid increase in gas consumption, the role of pipelines as a transportation means of natural gas is increasing. In general, when natural gas is being transported in pipelines, some liquid mainly from formation of condensate is introduced and this phenomenon makes operational problems more complex in the gas industry. Thus, an appropriate method is necessary for predicting the effect of presence of gas condensate on operational efficiency. In this study, a statistical model was developed using an integrated single- and two-phase flows concept. Using this model, the effects of the incipient point of gas condensate and its quantity on outlet pressure were analyzed. Also, the effect of variations of flow regimes in two-phase region on outlet pressure after the incipient point was analyzed.

• Korean Journal of Occupational Health Nursing
• /
• v.29 no.4
• /
• pp.354-362
• /
• 2020

Purpose: This study aimed to define and clarify learning transfer in nursing. Methods: This study used a hybrid model to analyze the concept of learning transfer in nursing through three phases. For the theoretical phase, learning transfer attributes were identified through a scoping literature review. In the fieldwork phase, in-depth focus group interviews were conducted to develop attributes. Purposive sampling was performed with ten participants(five nursing students, two nurses, three nursing faculty members). In the analysis phase, the attributes and final analysis of learning transfer in nursing were extracted and integrated from the previous two phases. Results: According to the analysis, learning transfer was represented in two dimensions with eight attributes. The development of competency dimension had three attributes: 1) theory acquisition, nursing skills, professional attitude, 2) integration, and 3) analysis competency. The competency change dimension had five attributes: 1) appropriateness in patient care, 2) proficiency in patient care, 3) satisfaction, 4) achievement, and 5) confidence. Conclusion: The concept analysis might provide a basic understanding of learning transfer, a development framework toward a measurement of nursing learning transfer and effective educational nursing strategies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.731-738
• /
• 2012

In this study, the evaluation of the aerodynamic characteristics of the NREL Phase VI Rotor System has been performed, for the 7 m/s upwind case using commercial FEA and CFD tools which are ANSYS Mechanical 12.1 and CFX 12.1. The initial operating conditions of the rotor blade include a $3^{\circ}$ tip pitch angle. A numerical simulation was carried out on only the rotor parts, excluding the tower structure based on the equivalent stiffness model, to consider the aeroelastic effect for the numerical simulation using the loosely coupled 2-way fluid-structure interaction method. The blade root bending moment was monitored in real time to obtain reasonable results. To verify the analysis results, the numerical simulation results were compared with the measurements in the form of the root bending moment and the pressure distributions of the NREL/NASA Ames wind tunnel test.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.11
• /
• pp.785-794
• /
• 2013

Combined sewer overflows during rainfall events contain sewer sediments and surface pollutants. This can cause significant chemical, physical and biological problems to receiving watershed. However, there are no method that can commonly apply to decide criteria for controlling the pollutant load. In this study, it sets up the reduction goals of combined sewer overflow through long-term simulation using the rainfall-runoff model. From a review of domestic and foreign management standard of combined sewer overflow for this, it makes decision that 60% (phase 1), 85% (phase 2) of total pollutant load and frequency per year for reduction goals is more proper. Also, the result of analyzing long-term simulation (minimum 10 years) applied to research basin indicates that reduction goals of BOD pollutant load are 1,123 kg (phase 1) and 2,374 kg (phase 2), and overflow volumes for research objective achievement are $11,685m^3$ (phase 1) and $24,701m^3$ (phase 2).

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.33.2-33.2
• /
• 2011

The 'NREL Phase VI' model with a 10.06m diameter was tested in the NASA Ames tunnel to make a reference data of the computational models. The test was conducted at the one rotational speed, blade tip speed 38m/s and the Reynolds number of the sectional airfoils in that test was around 1E6. The 1/5 scale down model of the 'NREL Phase VI' model was used in this paper to study the power characteristics in low Reynolds number region, 0.1E6 ~ 0.4E6 which is achievable range for the conventional wind tunnel facilities. The torque generated by the blade was directly measured by using the torque sensor installed in the rotating axis for a given wind speed and rotational speed. The power characteristics below the stall condition, lambda > 4, was presented in this paper. The power coefficient is very low in the condition below the Re. 0.2E6 and rapidly increases as the Re. increases. And it still increases but the variation is not so big in the condition above the Re. 0.3E6. This results shows that to study the performance of the wind turbine blade by using the scaled down model, the Re. should be larger than the 0.3E6.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.27.2-27.2
• /
• 2011

The Kepler(NASA) and CoRoT(ESA) space telescopes are surveying thousands of exoplanet for finding Earth-like exoplanets with similar environments of the Earth. Then the TPF(NASA), DARWIN(ESA) and many large-aperture ground telescopes have plan for spectroscopic observations of these earth-like exoplanets in next decades. Now, it has been started to simulate the disk averaged spectra of the earthlike exoplanets for comparing the observed spectra and suggesting solutions of environment of these planets. Previous research, the simulations are based on radiative transfer method, but these are limited by optical models of Earth system and instruments. We introduce a new simulation method, IRT(Integrated Ray Tracing) to overcome limitations of previous method. The 3 components are defined in IRT; 1)Sun model, 2)Earth system model (Atmosphere, Land and Ocean), 3)Instrument model. The ray tracing in IRT is simulated in composed 3D real scale space from inside the sun model to the detector of instrument. The Sun model has hemisphere structure with Lambertian scattering optical model. Atmosphere is composed of 16 distributed structures and each optical model includes BSDF with using 6SV radiative transfer code. Coastline and 5 kinds of vegetation distribution data are used to land model structure, and its non-Lambertian scattering optical model is defined with the semi-empirical "parametric kernel method" used for MODIS(NASA) and POLDER(CNES) missions. The ocean model includes sea ice cap structure with the monthly sea ice area variation, and sea water optical model which is considering non-lambertian sun-glint scattering. Computation of spectral imaging and radiative transfer performance of Earth system model is tested with hypothetical space instrument in IRT model. Then we calculated the disk averaged spectra of the Earth system model in IRT computation model for 8 cases; 4 viewing orientation cases with full illuminated phase, and 4 illuminated phase cases in a viewing orientation. Finally the DAS results are compared with previous researching results of radiative transfer method.