• 제목/요약/키워드: 2-hydroxyethyl methacrylate

검색결과 156건 처리시간 0.027초

The Swelling and Mechanical Properties of Hydrogels of Tactic Poly (2-Hydroxyethyl Methacrylate)

  • Lee, Joong-Whan;Kim, Eul-Hwan;Jhon, Mu-Shik
    • Bulletin of the Korean Chemical Society
    • /
    • 제4권4호
    • /
    • pp.162-169
    • /
    • 1983
  • The swelling and stress-elongation experiments have been performed for two kinds of gels of tactic poly (2-hydroxyethyl methacrylate) (P-HEMA) with varying crosslinker concentrations. The gels of isotactic and syndiotactic P-HEMA were swollen in aqueous salt solutions upon varying molal concentrations. The solute used were NaCl, $MgCl_2$, $Na_2SO_4$, $MgSO_4$ and urea. The water content at equilibrium swelling and the salt partition coefficient were determined, and stress-elongation curves of the gels were obtained. From these results, the effective number of chain (${\nu}_e$) and the Flory-Huggins interaction parameter (${\chi}_1$) were also obtained. The swelling experiment was also performed under varying solvents, and the degree of swelling was determined. The solubility parameter of P-HEMA was obtained as 13.4 (cal/mole)$^{l/2}$ using the correlation between the degree of swelling and the solubility parameter (${\delta}_1$) of solvents. The mechanical properties of syndiotactic P-HEMA is stronger than that of isotactic P-HEMA, and the water content of both gels become smaller when the crosslinking increases. Isotactic P-HEMA contains more water content than syndiotactic P-HEMA does.

실리콘을 함유한 양친성 중합체의 합성 및 성질 (Synthesis and Properties of Amphiphilic Polymers Containing Silicone)

  • 윤구식;성용길;김성완
    • 대한화학회지
    • /
    • 제39권1호
    • /
    • pp.76-80
    • /
    • 1995
  • 소수성 Polydimethylsiloxane(PDMS)과 친수성인 poly(2-hydroxyethyl methacrylate)(PHEMA)의 공중합체를 합성하여 여러가지 용매의 팽윤도를 측정하였다. 그 결과 PHEMA의 용해도 파라미터$(\delta)$가 26$(J/c m^3)^{1}2}$인> 것으로 나타났다. PHEMA의 함량이 많은 공중합체에는 $\delta$값이 큰 에탄올의 함유율이 높았으며, PDMS의 함량이 많은 경우 $\delta$값이 작고 극성인 tetrahydrofuran의 함유율이 높았다. 또한 용매의 $\delta$값이 클수록 PDMS의 함량의 증가와 함께 용매 함유율은 증가하였다. 모델 의약으로 사용된 crystal violet(CV)의 흡수거동을 조사한 결과 CV의 흡수율은 PHEMA 단일 중합체보다 PDMS가 함유된 공중합체일 때 더 큰 값을 나타내었다. 공중합체 중의 PDMS 함량이 증가하면 CV의 흡수율은 감소하였다.

  • PDF

소프트 콘텍트 렌즈용 하이드로젤의 계면학적 및 유변학적 특성 연구 (Interfacial and Rheological Properties of Selected Hydrogel Formulations for Soft Contact Lens)

  • 노혜란
    • 폴리머
    • /
    • 제36권2호
    • /
    • pp.190-195
    • /
    • 2012
  • 소프트 콘텍트 렌즈의 재질 별 계면학적 특성 및 유변학적 변화를 조사하여 렌즈 재료의 성분 설계에 기본 정보를 제시하고자 하였다. 눈물 단백질인 albumin과 IgG의 흡착량을 측정한 결과 하이드로젤의 표면 에너지가 증가함에 따라 점차 단백질 흡착량이 감소하는 것을 볼 수 있었다. Polydimethylsiloxane-polyvinylpyrrolidone(PDMS-PVP) 하이드로젤은 albumin과 IgG 흡착량이 가장 높았으며 poly(2-hydroxyethyl methacrylate)-polyvinylpyroolidone(HEMA-PVP)의 경우 albumin의 흡착량은 매우 미미한 것으로 나타났다. 일정한 수직항력 하에서의 하이드로젤의 토크는 실리콘 재질인 PDMS-PVP의 경우 HEMA계열보다 약 5배 이상 크게 측정된 것을 볼 수 있었다. 흥미로운 것은 단백질 흡착량이 적은 HEMA계열 하이드로젤의 경우 실리콘 계열 하이드로젤보다 인공 눈물 내 거동 시 마찰계수가 오히려 더 큰 것을 알 수 있었다. 인공눈물 내의 하이드로젤의 거동은 단백질 흡착으로 인한 윤활 효과 외에도 하이드로 젤 고유의 구조와 회전하는 계면의 성질에 큰 영향을 받는 것을 알 수 있었다.

서로 다른 측쇄 종류를 가진 주 단량체에 따른 수성 아크릴계 점착제의 물리적 특성 (Physical Properties of Water-Based Acrylic Adhesives According to Main Monomers with Different Side Chain Types)

  • 신혜린;김유리;김경실;박종권
    • 한국응용과학기술학회지
    • /
    • 제37권6호
    • /
    • pp.1627-1634
    • /
    • 2020
  • 본 연구에서는 수성 아크릴계 점착제의 물성에 대한 주 단량체의 측쇄 사슬의 영향을 비교하기 위해 주 단량체로 각각 ethyl acrylate, 2-ethylhexyl acrylate, lauryl methacrylate를 사용하여 acrylic acid, 2-hydroxyethyl acrylate와 공중합체를 합성하여 수성 아크릴 점착제를 제조하였다. 제조한 수성 아크릴 점착제의 고형분, 평균입도분포, 초기점착력, 최대점착력, 박리강도, 내열점착력 등의 물리적 특성을 비교하였다.

생체적합성 및 생체안정성이 향상된 이식용 합성 수화젤 (Synthetic Hydrogel as an Implant Material with Enhanced Biocompatibility and Biostability)

  • 최진현;박보형;한영아;김수정;임정옥
    • 폴리머
    • /
    • 제28권1호
    • /
    • pp.86-91
    • /
    • 2004
  • 생체 이식용 재료로서 제한된 용도를 갖는 기존의 스폰지를 대체하기 위해 히드록시에틸 메타크릴레이트 및 메타크릴산염이 높은 단량체 농도에서 단독 또는 공중합하여 생체적합성 및 생체안정성이 향상된 수화젤을 합성하고 이들의 세포 독성, 세포 부착성, 및 조직 적합성 등을 고찰하였다. 히드록시에틸 메타크릴레이트의 투입 몰비가 증가할수록 세포 독성은 감소하여 0.05의 투입 몰비에서는 거의 세포 독성을 나타내지 않았다. 메타크릴산염이 0.01의 몰비로 투입된 수화젤이 가장 우수한 세포 부착 및 퍼짐을 보인 반면, 메타크릴산염이 0.05 투입된 수화젤은 낮은 세포 부착을 보였다. 메타크릴산염이 공중합된 수화젤은 이식 후 8주가 경과하여도 특별한 이물질 반응의 소견을 보이지 않았다. 따라서 높은 단량체 농도에서 히드록시에틸 메타크릴레이트와 메타크릴산염을 적절한 단량체 투입비로 공중합하여 제조한 수화젤은 탁월한 생체적합성 및 생체안정성을 갖는 생체 이식용 재료로 사용될 수 있다고 사료된다.

하이솔리드 아크릴/폴리이소시아네이트 도료의 제조와 도막 특성 (The Preparation and Characteristics of High Solids Acrylic/Polyisocyanate Coatings)

  • 김대원;황규현;정충호;우종표;박홍수
    • 폴리머
    • /
    • 제24권4호
    • /
    • pp.520-528
    • /
    • 2000
  • 본 연구는 고형분 70%인 하이솔리드 아크릴 수지 (BMHA)를 합성하여, 환경친화성 도료인 하이솔리드 아크릴/폴리이소시아네이트 도료(BNHS)에 적용하고 그의 도막특성을 살펴본 것에 그 의의가 있다. BMHA는 새로운 형의 단량체로서 acetoacetoxyethyl methacrylate (AAEM)을 도입하고 여기에 n-butyl acrylate, methyl methacrylate 및 2-hydroxyethyl acrylate를 4원공중합시켜 얻었다. BMHA 합성에 있어서 T$_{g}$ 값이 낮을수록, AAEM의 양이 많을수록 각각 높은 전환율을 나타내었고, T$_{g}$값 고정하의 OH 값 변화에 따른 전환율은 큰 차이가 없었다. BMHA와 폴리이소시아네이트를 상온경화시켜 하이솔리드 BNHS 도료를 제조하고서 자동차 상도용 도료로서의 적합성 여부를 알아보기 위하여 도막물성 시험을 한 결과, BNHS내에 AAEM 도입 전후의 도막물성 비교시험에서 AAEM 도입후에 내마모성과 내용제성이 향상됨으로써 자동차 상도용 도료로서의 응용가능성을 보여주었다.다.

  • PDF

HEMA가 치환된 Polyphosphazene의 공중합 및 콘택트렌즈 응용 (Copolymerization and Contact Lens Application of HEMA-Substituted Polyphosphazene)

  • 김태훈;성아영
    • 대한화학회지
    • /
    • 제53권3호
    • /
    • pp.340-344
    • /
    • 2009
  • Phosphonitrillic chroride cyclic trimer 화합물을 $200{\sim}300\;{^{\circ}C}$ 하에 개환중합하여 선상 고분자를 얻 은 후 Grignard 시약 ($CH_2$=CH-MgBr)을 천천히 가하여 vinyl 기를 포함하는 polyphosphazene을 합성하였 으며, 이 폴리머를 HEMA(2-hydroxyethyl methacrylate)와 반응시켜 HEMA/vinyl-substituted polyphosphazene 을 얻었다. 이 고분자를 AIBN (azobisisobutyronitrile) 개시제 존재 하에서 교차결합제로 EGDMA(ethylene glycol dimethacrylate) 그리고 NVP (N-vinyl-pyrrolidone)을 혼합하여 공중합 시켰다. 얻어진 공중합체에 대한 측정 결과 산소투과율 (Dk/t)은 88로 측정되었으며, 함수율은 30.89% 그리고 가시광선 투과율은 87%로 나타났다. 이 자료로부터 이 공중합체가 우수한 콘택트렌즈 재료임을 발견하였다.

Synthesis of Acryl Phosphate Antistatic Agent and Its Effect on the Antistatic, Thermal and Mechanical Properties of PMMA

  • Park, Eu-Soo;Cho, Eun-Bum;Kim, Duk-Joon
    • Macromolecular Research
    • /
    • 제15권7호
    • /
    • pp.617-622
    • /
    • 2007
  • A simple and economic antistatic agent, (2-methacryloyloxyethyl)acid phosphate (acryl phosphate), was synthesized via the reaction of 2-hydroxyethyl methacrylate with phosphorus pentoxide. The acryl phosphate antistatic agent, synthesized in this study, was introduced into poly(methyl methacrylate) (PMMA) resin via copolymerization with MMA. This antistatic agent provides the PMMA matrix with excellent antistatic properties, including surface resistance and electric charge. A comparison of the present antistatic agent with other commercial agents demonstrated the excellence of not only its electrical, but also its thermal and mechanical properties.