• 한국환경성돌연변이발암원학회:학술대회논문집
• /
• 한국환경성돌연변이발암원학회 2003년도 추계학술대회
• /
• pp.194-194
• /
• 2003

• Bulletin of the Korean Chemical Society
• /
• 제23권12호
• /
• pp.1693-1694
• /
• 2002

• Archives of Pharmacal Research
• /
• 제22권6호
• /
• pp.624-628
• /
• 1999

A formal asymmetric synthesis of Mugineic acid was accomplished from cis-2-butene-1,4-diol throughcatalytic Sharpless epoxidation oxidations and doupling reaction.

• Fibers and Polymers
• /
• 제2권3호
• /
• pp.141-147
• /
• 2001

The effect of compositions of isophorone diisocyanate (IPDl)/4.4'-diphenylmethane diisocyalate (MDI) and polypropylene oxide diol (PPG, $M_w$: 3000)/1,4-butane diol (BD) on the properties of UV-cured polyurethane acrylate films based on 2-hydroxyethyl acrylate (HEA) was examined. UV-curable polyurethane acrylates were formulated from the prepolymer. trimethylol propane triacrylate (TMPTA) as a reactive diluent, and 1-hydroxycyclohexyl ketone (Irgacure 184) as a photoinitiator. Dynamic mechanical thermal properties and elastic properties of UV-cured polyurethane acrylates was fecund to depend on the chemical composition of IPDl/MDl and PPG/BD. As the BD content increased, the tensile storage modulus of all series samples increased significantly. The storage modulus increased in the order of samples A (IPDI based samples)> samples B (IPDI/MDl (7/3 molar ratio) based samples) > samples C (IPDI/MDl (5/5 molar ratio) based samples at the same composition. Two distinct louts modulus peaks for all samples are observed owing to the softs segment glass transition temperature ($T_gh$) and hard segment glass transition temperature ($T_gh$). The difference between $T_gh$, and $T_gh$, (Δ$T_g$) increases in the order of A > B > C at the same composition. In cycle test, the initial onset strain (%) was found to decrease with increasing BD content in PPG/BD and with increasing MDI content in IPDI/MDl.

• Journal of Nutrition and Health
• /
• 제8권4호
• /
• pp.27-32
• /
• 1975

This investigation was designed to determine the influence of drying methods on the chemical changes in red pepper. Three different drying methods were employed: 1) Sun-drying at $25{\sim}28^{\circ}C$ for 15 days, 2) Drying in oven at $60^{\circ}C$ for 49 hours, and 3) Drying in oven at $90^{\circ}C$ for 8 hours. Dried and ground peels were used for the analysis of carotenoid pigments, capsaicin, and vitamin C. The results were as follows; 1. The total carotenoid content of sun-dried sample was more significantly in creased about 4% than that of the fresh sample, but both samples dried in oven were decreased about 30%. Among carotenoid groups, diol-polyol group was chiefly increased, and both samples dried in oven were decreased in the same trend; $17{\sim}18%$ reduction was found in hydrocarbons and monols and $36{\sim}38%$ was in diol-polyols. 2. In Capsaicin content in red pepper, the sun-dried sample was increased about twice of that of the fresh sample and both samples dried in oven were also tended to increase. 3. High reduction of vitamin C content was found in each treatment; 76% for the sun-dried and 89% for the oven-dried samples, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제27권1호
• /
• pp.93-98
• /
• 2006

Two new compounds 1'-(stigmast-11,20(21),25-trien 3$\alpha$,9$\alpha$-diolyl)-3'-(pimara-11,15-dien-3$\alpha$-olyl) glycerol (1) and stigmast-5-en-3$\alpha$,26-diol (2) along with known fatty acids n-hexacosanoic acid (3) and hexadecanoic acid (4), have been isolated from the methanol extract of rice hulls of Oryza sativa. The structures of the compounds were elucidated using 1D and 2D NMR spectral methods, viz; $^1H, ^{13}C, ^{13}C$-DEPT, $^1H-^1H$ COSY, $^1H-^{13}C$ HETCOR, HSQC and HMBC aided by IR, EIMS, FABMS and HRFABMS. Compound (1) showed inhibition to radish germination, growth of shoot and root length.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 추계학술발표회 초록집
• /
• pp.56-56
• /
• 2001

Ni-W alloy deposit is one of the best alternatives to hard chromium plating because of its good mechanical properties (high hardness, high strength, and good wear resistance). Ni-W alloy is deposited from weakly acidic or alkaline electrolytic bath with nickel sulfate, sodium tungstate or APT, and some kinds of organic hydroxy-acid complex and ammonia salts. W content of the deposit can be changed from 0 to 5Owt% and the coating with high W content is more attracted. But, meanwhile, the deposited layers are always found high internal stress, which cause them to become brittle and to bond insufficiently with the substrate. On the second hand, as the W content is incresed, the current efficiency reduced, which results in large quantities of hydrogen evolution and then produces bubbles on surface and pitting appearance In this paper, the influence of some additives on Ni-W alloy electroplating was investigated by means of compositional analysis and SEM. The initial results showed that 2-butyne-1,4-diol was the best brightener for Ni-W plating process. It could brighten and level deposit, but decreased the cathodic current efficiency. Its optimum concentration range is from O.lgjL to 0.5gjL. Besides, three kinds of additives including 2-butyne-1,4-diol were examined with Dagguchi method.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.231-236
• /
• 2008

양이온 개환중합법을 이용하여 Epichlorohydrin(ECH)과 Tetrahydrofuran(THF)을 공중합 하였다. 중합은 1,4-Butandiol 존재 하에 $BF_3THF$를 촉매로 사용하여 잘 제어된 Copolyetherdiol을 합성하였다. 분자량은 [monomer]/[diol]비를 조절하였고, 공중합체 조성은 ECH와 THF의 투입몰비를 변화하여 조절하였다. 합성된 Copolyetherdiol의 Chlorine기는$S_N2$반응을 이용하여 Azide기로 치환하였다. 합성된 고분자를 프리폴리머로 사용하여 경화제인 N-100/IPDI와 경화촉매인 TPB/MA 혼합촉매를 이용하여 Polyurethane을 합성하여 경화거동과 기계적 특성은 비교 분석하였다.

• 한국식품과학회지
• /
• 제10권2호
• /
• pp.181-188
• /
• 1978

1년생(年生) 수삼근(水蔘根)과 엽병(葉柄)(petiole)으로 조직배양(組織培養)한 callus 양자간(兩者間)의 유효성분(有效成分)인 saponins 및 sapogenins에 관하여 비교(比較) 검토(檢討)한 결과(結果)는 다음과 같다. (1) 인삼(人蔘)과 callus는 Liebermann-Burchard 반응(反應)에서 양성(陽性)으로 확인(確認)되었다. (2) Ginsenoside $Rx[x=o,a,b_1,b_2,c,e,d,g(f)]$의 Rf치(値)는 거의 일치(一致)하였으며 상대함량비(相對含量比)는 인삼(人蔘)에서 Rb,c : Rg(f)=21.1 : 20.5 (1.03 : 1), Rb,c,d : Re,g(f)=22.8 : 26.9(1 : 1.17)이었으며, callus에서 Rb,c : Rg(f)= 18.2 8.4(2.16 : 1) Rb,c,d : Re,g(f)=19.28 : 31.6(1 : 1.63)이었다. (3) 인삼(人蔘)과 callus의 sapogenins에 있어서 diol; triol, oleanolic acid, ${\beta}-sitosterol$의 Rf치(値)는 거의 일치(一致)하였으며 상대함량비(相對含量比)는 인삼(人蔘)에서 diol : triol = 13.8 : 7.4(1.86 : 1)이었고, callus에서 diol : triol = 19.2 : 7.2(2.66 : 1)이었다.

• Elastomers and Composites
• /
• 제49권2호
• /
• pp.110-116
• /
• 2014

디에틸렌글리콜(DEG, 분자량 106.1)과 폴리에틸렌글리콜600(PEG600, 분자량 603.3)을 아디프산(AA)과 반응시켜 폴리(옥시에텔렌-아디페이트)-디올 공중합체를 합성하는 에스테르 반응에서, stannous 2-ethylhexanoate 촉매의 농도가 반응속도에 주는 영향을 연구하였다. 반응에 사용되는 AA의 카르복실기 당량 대비 폴리올의 히드록실기의 당량비를 2로 맞추어서 합성된 폴리(에테르-에스테르)의 양말단이 OH기로 결합되도록 유도하였다. 반응은 $170^{\circ}C$에서 촉매농도 0.15 ~ 2.0 wt.%로 수행하였다. 합성된 폴리(옥시에텔렌-아디페이트)-디올의 수평균 중합도는 약 3 이었다. DEG와 AA로부터 폴리(옥시에텔렌-아디페이트)-디올이 합성되는 반응의 겉보기속도상수($k_{app}$) 값은 촉매의 농도가 커짐에 따라 $k_{app}=0.88[C_{cat}]$의 관계를 가지며 선형적으로 증가한 반면에, PEG600과 AA의 에스테르 반응의 $k_{app}$ 값은 촉매농도와 $k_{app}=0.123[C_{cat}]^{0.55}$의 관계로 증가하며 포화되는 경향을 나타내었다. DEG와 AA사이의 합성반응에서도 반응속도의 촉매농도에 대한 의존성이 비선형 관계로 바뀌는 것이 예상되며, 이때의 촉매농도는 [$Sn(C_8H_{15}O_2)_2$ mole/mole of AA mole] 값이 0.066([$C_{cat}$]=0.22M)에 가까운 영역에 있을 것으로 추정된다.