• 제목/요약/키워드: 2-dimensional transformation

검색결과 264건 처리시간 0.039초

2D to 3D Conversion에서 Depth-Map 기반 제작 사례연구 - '명장 관우' 제작 중심으로 - (Propriety analysis of Depth-Map production methods For Depth-Map based on 20 to 3D Conversion - the Last Bladesman)

  • 김효인;김형우
    • 스마트미디어저널
    • /
    • 제3권1호
    • /
    • pp.52-62
    • /
    • 2014
  • 입체 디스플레이 보급의 보편화가 진행됨에 따라, 입체 콘텐츠의 수요가 증가하고 있다. 이러한 증가에 맞추어 2010년도를 기점으로 2D to 3D 변환 콘텐츠가 부족한 수요를 충족시킬 대안으로 제시되었다. 그러나 입체효과만을 강조한 2D to 3D 변환콘텐츠가 생산되면서 시각적 피로도와 입체감에 대한 품질의 저하가 문제로 지적되고 있다. 본 연구에서는 2011년 개봉한 '명장 관우'에서, 13개 Scene을 선별하여 입체 변환 콘텐츠로 제작하고, 변환에 적용된 Depth-Map의 품질이 시각적 피로도와 입체감을 표현하는데 있어서, 적정성을 가지는가의 여부를 전문가 그룹을 대상으로 인터뷰 및 설문조사를 시행하였다. 움직임의 변화가 많은 영상에 적용한 Depth-Map의 구성방식은 입체변환 기술에 많이 사용되는 방법으로 전(前) 후(後)관계의 분석을 통해 계단식 구성방식으로 깊이 단계 지도를 제작하게 된다. 실험을 통하여, 본 연구에서 제시한 Depth-Map의 구성이 입체변환 콘텐츠 제작에 있어 시각적 피로도를 낮추고 입체감 향상에 타당한지에 대한 결과를 도출하였으며, 실험에 응한 전문가 그룹의 과반수이상이 긍정적인 반응을 표시하였다. 본 연구의 결과 빠른 움직임을 가지는 2D영상을 3D영상으로 변환하는데 적용한 계단식 Depth-map의 구성방식으로도 시각적 피로도를 감소시키고, 입체감 인식을 증가시키는데 효율성을 가진다는 결과를 도출하였다.

Adelphic Integral을 이용한 비선형 정규모드 진동 해석 (A Study on the Nonlinear Normal Mode Vibration Using Adelphic Integral)

  • Huinam Rhee;Joo, Jae-Man;Pak, Chol-Hui
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 추계학술대회논문집 II
    • /
    • pp.799-804
    • /
    • 2001
  • Nonlinear normal mode (NNM) vibration, in a nonlinear dual mass Hamiltonian system, which has 6th order homogeneous polynomial as a nonlinear term, is studied in this paper. The existence, bifurcation, and the orbital stability of periodic motions are to be studied in the phase space. In order to find the analytic expression of the invariant curves in the Poincare Map, which is a mapping of a phase trajectory onto 2 dimensional surface in 4 dimensional phase space, Whittaker's Adelphic Integral, instead of the direct integration of the equations of motion or the Birkhotf-Gustavson (B-G) canonical transformation, is derived for small value of energy. It is revealed that the integral of motion by Adelphic Integral is essentially consistent with the one obtained from the B-G transformation method. The resulting expression of the invariant curves can be used for analyzing the behavior of NNM vibration in the Poincare Map.

  • PDF

Width Operator for Resonance Width Determination

  • 박태준
    • Bulletin of the Korean Chemical Society
    • /
    • 제17권2호
    • /
    • pp.198-200
    • /
    • 1996
  • The resonance width may be directly determined by solving an eigenvalue equation for width operator which is derived in this work based on the method of complex scaling transformation. The width operator approach is advantageous to the conventional rotating coordinate method in twofold; 1) calculation can be done in real arithmetics and, 2) so-called θ-trajectory is not required for determining the resonance widths. Application to one- and two-dimensional model problems can be easily implemented.

An Alternative Approach to Optimal Impulsive-Thrust Formation Reconfigurations in a Near-Circular-Orbit

  • 김영광;박상영;박찬덕
    • 천문학회보
    • /
    • 제37권2호
    • /
    • pp.160.1-160.1
    • /
    • 2012
  • We present an alternative approach for satellite formation reconfiguration by an optimal impulsive-thrust strategy to minimize the total characteristic velocity in a near-circular-orbit. Linear transformation decouples the Hill-Clohessy-Wiltshire(HCW) dynamics into a new block-diagonal system matrix consisting of 1-dimensional harmonic oscillator and 2-dimensional subsystem. In contrast to a solution based on the conventional primer vector theory, the optimal solution and the necessary conditions are represented as times and directions of impulses. New analytical expression of the total characteristic velocity is found for each sub systems under general boundary conditions including transfer time constraint. To minimize the total characteristic velocity, necessary conditions for times and directions of impulses are analytically solved. While the solution to the 1-dimensional harmonic oscillator has been found, the solution to the 2-dimensional subsystem is currently under construction. Our approach is expected to be applicable to more challenging problems.

  • PDF

국가 GIS와 연계를 위한 지적기준점의 세계측지계 변환 실험 (Experiment on Transform of Cadastral Control Points to the New Korea Geodetic Datum for Connecting with National Geographic Information System)

  • 송동섭;홍진상;윤홍식
    • 한국측량학회지
    • /
    • 제25권4호
    • /
    • pp.309-317
    • /
    • 2007
  • 우리나라의 지적기준점은 구소삼각원점, 특별소삼각원점, 특별도근측량원점 및 통일원점 등 다양한 원점체계를 기준으로 하고 있다. 이러한 다양한 원점체계를 가진 수치지적도는 통일원점을 기준으로 하는 국가 GIS 데이터와의 연계에 어려움을 가지고 있다. 본 연구에서는 구소삼각원점에 기준한 지적기준점 성과를 통일원점을 기준한 성과로 변환하기 위한 실험을 실시하였다. 변환 방법은 2차원 등각변환에 의한 변환 매개변수를 산출하고 이를 적용하여 간접변환한 성과를 GPS로 측량한 성과와 비교하였다. 또한 통일원점 기준의 지적기준점 성과를 세계측지계 기준의 성과로 변환하기 위한 최적합 실험을 실시하였다.

2차원 이산 웨이블릿 변환의 계산시간 감소를 위한 알고리듬 (Calculation Time Reduction Algorithm of 2-Dimensional Discrete Wavelet Transform)

  • 이혁범;유지상;김종현;서영호;김왕현;김동욱
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
    • /
    • pp.49-52
    • /
    • 2000
  • This paper is to propose an algorithm to reduce the calculation time to perform the 2-dimensional Discrete Wavelet Transform(2DWT). We call this algorithm as Reduced 2-dimensional Discrete Wavelet Transformation(R2DWT). This algorithm uses a modified Mallat-tree such that in each level, the column transform is performed only with the low-pass filtered row transform result. The resulting number of sub-band regions is 2L+1, meanwhile the original(2DWT) has 3L+1 sub-regions, where L is the transform level. To show the proposed algorithm is useful without much loss in SNR(Signal-to-Noise Ratio), we performed experiments with various images. The results showed that above 5:1 in compression ratio, the proposed algorithm has less than 0.SdB difference in SNR from 2DWT with about 25% reduction in calculation time.

  • PDF

전역 변형을 갖는 활성곡면을 사용한 모델 적합 (Model Fitting using an Active Surface with Global Detormations)

  • 김동근;최증원;황치정
    • 한국정보처리학회논문지
    • /
    • 제4권3호
    • /
    • pp.792-801
    • /
    • 1997
  • 본 논문에서는 전역 변형을 갖는 활성 곡면을 사용하여 잡음으로 오염된 데이터를 곡면으로 적합하는 알고리즘을 제안하였다. 이것은 2차원 곡선 모델에서 이전에 연구 [11,12]된 알고리즘의 3차원 곡면으로의 확정이다. 제안된 방법에서는 유한 차분을 사용하며, 각 노드점에서 주위의 외부힘을 사용하여 부분적으로 수축 또는 팽챙을 허용하는 balloon 모델[2,3]에 기반으로 진행하는 동안 곡면의 모양을 전역 변형 후의 곡면으로의 전역 변환이 결정적 최소 자승법에 의하여 계산되고, 마지막으로 전역 변환을 변형 전의 곡면에 적용한다. 실험에서 아핀변형을 갖는 활성 곡면을 사용하여 잡음으로 오염된 데이터를 곡면(타원체, B스플라인)으로 적합하였다.

  • PDF

인공장기

  • 민병구
    • 대한의용생체공학회:의공학회지
    • /
    • 제10권2호
    • /
    • pp.112-113
    • /
    • 1989
  • Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult.

  • PDF

GIS 기본도 및 DB의 세계측지계 좌표변환 정확도 분석에 관한 연구 (A study on the Accuracy Analysis of the World Geodetic System Transformation for GIS Base Map and Database)

  • 조재관;최윤수;권재현;이보미
    • 대한공간정보학회지
    • /
    • 제16권3호
    • /
    • pp.79-85
    • /
    • 2008
  • 본 연구에서는 세계측지계 기준에 따라 지리정보를 효율적이고 정확하게 좌표변환하기 위한 방안을 도출하기 위하여 기존 1/1,000 수치지형도와 GIS 응용시스템 DB의 구축 현황 및 문제점을 파악하고, 좌표변환 파라미터 산출과 변환 성과의 정확도 평가 등을 수행하여 실용적인 좌표변환 방안을 제시하였다. 국가좌표변환계수에 의한 좌표변환 정확도를 분석하였으며, 연구대상지역의 국가기준점 및 도시기준점을 이용하여 지역좌표변환계수의 특성을 고찰 하였다. 또한 항공삼각측량 성과를 이용한 1/1,000 수치지형도를 도시기준점을 이용한 측량성과와 비교 하여 수치 지형도 제작 당시 국가기준점의 편의량을 분석하고, 도시기준점을 이용하여 추정한 좌표변환계수를 사용하여 세계측지계로 좌표변환한 성과의 정확도를 분석하였다. 마지막으로 1/1,000 수치지형도의 좌표변환 방법을 적용하여 지하시설물 DB를 대상으로 좌표변환 정확도를 평가하였다. 본 연구를 통하여 지자체 단위의 좌표변환을 수행하는데 있어 도시기준점을 이용한 Molodensky-Badekas 방법에 의한 좌표변환계수 적용과 2차원 Affine 변환도 국지적인 범위에서 적용 가능하였음을 확인하였다. 또한 수치지형도를 기반으로 지거측량 방법으로 구축된 GIS 응용 DB의 경우에도 좌표변환 및 편의보정을 통해 약 10cm 이내의 변환 정확도로 좌표변환이 가능하여 세계측지계 전환에 큰 문제가 없다고 판단하였다.

  • PDF

스펙트럴 포물선 방정식 법을 이용한 수중음파 전달해석 (Analysis of Acoustic Propagation using Spectral Parabolic Equation Method)

  • 김국현;성우제
    • 한국음향학회지
    • /
    • 제15권2호
    • /
    • pp.72-78
    • /
    • 1996
  • 본 논문에서는 2차원 양방향 포물선 방정식 법과 푸리에 변환을 이용하여 3차원 굴절현상 및 3차원 후방 산란파를 포함하는 $2\frac12$차원 문제를 푸는 방법에 대해 다루었다. 여기서 $2\frac12$ 차원 문제란 2차원적 해양환경 하에 3차원적 음원이 존재할 경우를 의미한다. 2차원 양방향 포물선 방정식법은 수치기법으로 깊이 방향과 수평거리 방향에 대해 각각 Galerkin법과 Crank-Nicolson법을 사용하며 수직 불연속 경계면에 의한 후방 산란파를 포함한 수평거리 의존 문제에 대해 유용한 해를 제공한다. 2차원 해양환경에서는 파수 k가 종 또는 횡 수평거리 방향과 깊이 방향에 대한 함수이므로 3차원 Helmholtz방정식 법을 이용해 스펙트럴 해를 구하여 다시 푸리에 역변환하면 최종 해를 구할 수 있다. 본 연구방법의 정확성을 시험하기 위해서 계단형 해저면을 갖는 간단한 해양환경에서 계산을 수행해 보았으며 대한해협의 특정지역에서의 3차원적 음파전달 특성을 살펴보았다.

  • PDF