• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.1-15
• /
• 2004

The purpose of this study was to investigate the kinematic variables of the upper part of the body for 8 elderly men during walking. For this study, kinematic data were collected using a six-camera (240Hz) Qualisys ProReflex system. The room coordinate system was right-handed and fixed in space, with righted orthogonal segment coordinate systems defined for the head, trunk, and pelvis. Based on a rigid body model, reflective marker triads were attached on the 3 segments. Three-dimensional Cartesian coordinates for each marker were determined at the time of recording using a nonlinear transformation(NLT) technique with ProReflex software (Qualisys, Inc.). Coordinate data were low-pass filtered using a fourth-order Butterworth with cutoff frequency of 6Hz. Three-dimensional angles of the head, trunk, and pelvis segment were determined using a Cardan method. On the basis of each segment angle, angle-angle plot used to estimated the movement coordinations between segments. The conclusions were as follows; (1) During the support phase of walking, the elderly people generally kept their, head the flexional and abductional posture. Particularly, the elderly displayed little internal/external rotation. (2) The elderly people showed extensional and external rotation postures in the trunk movement. Particularly, It showed the change from adduction into abduction at the heel contact event of the stance phase. (3) The elderly people showed almost same pelvis movement from the flexion into extension, from the abduction into adduction, and from internal rotation into external rotation at the mid stance and toe off of the stance phase.

• Journal of the Korean Society of Costume
• /
• v.50 no.7
• /
• pp.75-96
• /
• 2000

Modern clothing is approached in the level of art, and it becomes the means of expressing individuality in modern society uniformed by the development of information society. In this modern society, modern men need the recovery of humanity and expectations of handcrafted skills for the succession of tradition culture. Prior to expressing individuality, we should examine our traditional culture and combine it with western culture. Quit started to be used for practical purpose such as life items, but it is expanded to the fields of art. Used in dress and its ornaments design, quilt is often applied to the addition of aesthetic factors or cubic material feelings by transforming its warming effect. Hereby, this study has a purpose to create high value added modern dross and its ornaments design by expressing the modern clothing is approached in the level of art, and it becomes the means of expressing individuality roe-dimensional characteristics of quilt, and applying the color combination and the surface of butterfly wings to dress and its ornaments design. The following are the results of this study. 1. The concept of quilt started for practical purposes, but it is expanded to decoration in modern times, and it is confirmed that quilt can be variously applied to handcrafted modern design. 2. Quilt removes the plane character of textile and it riches the three-dimensional material of dress and its ornaments. Applying these characteristics, the expression of transparent wings were possible with 3 transparent layers of textile. 3. The spledid color of butterfly wings are expressed by coloring oganza and felt, and the various colors of felt showed rich color gradation. 4. The form and pattern of butterfly wings are applied as modeling form and line, and the transformation. repetition and expansion of unit forms determined the form of quilting lines. By designing the characteristics of back wings for the composition line of clothing, the form characteristics of a motif could be emphasized. 5. By using felt, oganza, Damdam yarn and ostritch feathers in expressing butterfly wings, the warm material of Linbun is felt, and the tip hair of wings are expressed by croche techniques using Damdam yarn.

• Archives of Craniofacial Surgery
• /
• v.12 no.1
• /
• pp.28-32
• /
• 2011

Purpose: A cranioremodeling helmet for correcting plagiocephaly was recently developed. However, no discrete objective methods to evaluate how the deformity is being corrected have been developed. We have established an easy and cost-effective method that can be used not only to show the correction process, but can also be used by physicians to assess the degree of plagiocephaly two-dimensionally. Methods: For two-dimensional evaluation, a length of malleable memory wire (2 mm in diameter) resembling "Sun-Wukong's headband" was placed on the patient's head. The wire around the patient's head was positioned on a plane including points 1 cm above the eyebrow and 1 cm above the auricle. The wire was placed on a sheet of paper and the outline was marked using pens of various colors during each visit. The degree of plagiocephaly correction could then be shown to the patient's parents at every consultation. Results: The method established by the present study easily shows the horizontal cross-section transformation of the head, illustrates plagiocephaly correction by the helmet, and shows the degree of correction in a two-dimensional manner. Conclusion: A soft-shell helmet is widely used for correcting plagiocephaly. However, evaluating the effectiveness of the helmet has been determined in a subjective manner, and a more objective method is now in demanded. Our study found that a "Sun-Wukong's headband" wire can accurately measure two-dimensional changes. Future studies will be required to identify landmarks needed for assessing plagiocephaly correction.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.147-148
• /
• 2007

In this study, the technology to grow oriented nanotube thin film from dip-coated $TiO_2$ using hydrothermal method has been successfully developed. The effects of preparation parameters, such as reaction temperature, duration and post treatment conditions on the film morphologies and the adherence to the substrate, have been examined. A general formation mechanism of oriented titanate nanotube thin film is proposed in terms of the detailed observation of the products via two dimensional surface FESEM studies and HRTEM images. The overall formation of $TiO_2-based$ nanotube thin film can be summarized with three successive steps: (1) $TiO_2$ dissolving and amorphous $Na_2TiO_3$ deposition process; (2) layered $Na_2Ti_3O_7$ formation via spontaneous crystallization and rapid growth process; (3) formation of nanotube thin film via $Na_2Ti_3O_7$ splitting and multilayer scrolling process of (100) planes around the c axis of $Na_2Ti_3O_7$.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.3
• /
• pp.161-167
• /
• 1992

We consider the preparation of long finite amplitude nondispersive waves over a step bottom between two regions of finite different depths. Two dimensional motion is assumed. with the wave crests parallel to the step, and irrotational flow in the inviscid fluid is considered. To describe the transformation of finite amplitude waves we use the finite-amplitude shallow-water equations, the conditions of mass flow conservation and pressure continuity at the cut above the step in Riemann's variables. The equations define four families of curves-characteristics on which the values of the Riemann's invariants remain constant and a system of two nonlinear equations that relates the amplitudes of incident reflected and transmitted waves. The system obtained is difficult to analyze in common form. Thus we consider some special cases having practical usage for tsunami waves. The results obtained are compared with the long wave theory and significant nonlinear effects are found even for quite small amplitude waves.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.6
• /
• pp.543-551
• /
• 2015

In this study, a novel method for dimension measurement of large-scale moving objects using stereo camera with 2-degree of freedom (2-DOF) mechanism is presented. The proposed method utilizes both the advantages of stereo vision technique and the enlarged visibility range of camera due to 2-DOF rotary mechanism in measuring large-scale moving objects. The measurement system employs a stereo camera combined with a 2-DOF rotary mechanism that allows capturing separate corners of the measured object. The measuring algorithm consists of two main stages. First, three-dimensional (3-D) positions of the corners of the measured object are determined based on stereo vision algorithms. Then, using the rotary angles of the 2-DOF mechanism the dimensions of the measured object are calculated via coordinate transformation. The proposed system can measure the dimensions of moving objects with relatively slow and steady speed. We showed that the proposed system guarantees high measuring accuracy with some experiments.

• Smart Media Journal
• /
• v.11 no.1
• /
• pp.31-37
• /
• 2022

This paper proposes a study on applying signal processing and deep learning for sound recognition that detects sounds commonly heard in daily life (Screaming, Clapping, Crowd_clapping, Car_passing_by and Back_ground, etc.). In the proposed sound recognition, several techniques related to the spectrum of sound waves, augmentation of sound data, ensemble learning for various predictions, convolutional neural networks (CNN) deep learning, and two-dimensional (2-D) data are used for improving the recognition accuracy. The proposed sound recognition technology shows that it can accurately recognize various sounds through experiments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.117-123
• /
• 2018

In this study, we suggest a fast image reconstruction scheme using Poisson equation from image gradient domain. In this approach, using the Poisson equation, a guided vector field is created by employing source and target images within a selected region at the first step. Next, the guided vector is used in generating the result image. We analyze the problem of reconstructing a two-dimensional function that approximates a set of desired gradients and a data term. The joined data and gradients are able to work like modifying the image gradients while staying close to the original image. Starting with this formulation, we have a screened Poisson equation known in physics. This equation leads to an efficient solution to the problem in FFT domain. It represents the spatial filters that solve the two-dimensional screened Poisson model and shows gradient scaling to be a well-defined sharpen filter that generalizes Laplace sharpening. We demonstrate the results using a discrete cosine transformation based this Poisson model.

• Journal of KIISE
• /
• v.42 no.2
• /
• pp.242-254
• /
• 2015

In this paper, we address the problem of improving the performance of multi-step k-NN search using multi-dimensional indexes. Due to information loss by lower-dimensional transformations, existing multi-step k-NN search solutions produce a large tolerance (i.e., a large search range), and thus, incur a large number of candidates, which are retrieved by a range query. Those many candidates lead to overwhelming I/O and CPU overheads in the postprocessing step. To overcome this problem, we propose two efficient solutions that improve the search performance by reducing the tolerance of a range query, and accordingly, reducing the number of candidates. First, we propose a tolerance reduction-based (approximate) solution that forcibly decreases the tolerance, which is determined by a k-NN query on the index, by the average ratio of high- and low-dimensional distances. Second, we propose a coefficient control-based (exact) solution that uses c k instead of k in a k-NN query to obtain a tigher tolerance and performs a range query using this tigher tolerance. Experimental results show that the proposed solutions significantly reduce the number of candidates, and accordingly, improve the search performance in comparison with the existing multi-step k-NN solution.

• Journal of Plant Biology
• /
• v.36 no.4
• /
• pp.377-382
• /
• 1993

Rice (Oryza saliva L.) calli containing both embryogenic callus (EC) and non embryogenic callus (NEC) regions were initiated from the mature seed on MS medium supplemented with 2.0 mg/L 2,4-D, 0.5 mg/L kinetin. The calli were developed into two callus type which can be distinguished by visual examination depending on color and appearance. In order to illucidate the polypeptide composition between EC and NEC, the total protein extracted from two types of callus was analysed by electrophoresis. By one-dimesional anlaysis of SDS-PAGE and Isoelectric focusing, several protein bands showed quantitative and qualitative difference in each type of callus. The further analysis of the total protein with two-dimensional electrophoresis showed at least 20 EC specific protein and 10 NE specific protein. Also 3 specific protein spots showing micro heterogeneity of 90, 65, 50 kD were detected in EC, while a series of acidic heterologous protein spots were visualized in NEC.in NEC.