• Journal of applied mathematics & informatics
• /
• 제7권2호
• /
• pp.703-707
• /
• 2000

We give some equivalent conditions about 0-dimensional differentiable level 0-sequencces.

• 한국항공우주학회지
• /
• 제41권2호
• /
• pp.156-163
• /
• 2013

우주파편과의 위험성을 판단하는데 가장 보편적으로 사용되는 것이 충돌확률이며, 현재 널리 사용되고 있는 방법은 최근접거리를 이용한 2차원 선형 충돌확률 계산방법이다. 본 논문에서는 우리나라가 운용하거나 운용을 계획 중인 아리랑 2호, 3호, 5호 위성에 접근하는 물체의 접근 특성을 분석하고, 2차원 선형 충돌확률보다 더 정밀한 3차원 비선형 충돌확률의 특성을 STK/Nonlinear Collision Probability Tool을 이용하여 분석하였다. 이를 통해 저궤도 위성인 아리랑 위성들에 대해 3차원 비선형 충돌확률의 효용성에 대해 고찰하였다. 분석결과 3차원 비선형 충돌확률은 350m/s 이하의 상대속도 영역에서 효용성이 있음을 확인하였으며, 우리나라 위성의 경우 낮은 상대속도를 가지고 접근하는 경우가 거의 없는 것으로 나타나 실질적으로 3차원 비선형 충돌확률에 대한 효용성이 낮은 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제45권5호
• /
• pp.613-624
• /
• 2013

Multi-dimensional two-phase phenomena occur in many industrial applications, particularly in a nuclear reactor during steady operation or a transient period. Appropriate modeling of complicated behavior induced by a multi-dimensional flow is important for the reactor safety analysis results. SPACE, a safety analysis code for thermal hydraulic systems which is currently being developed, was designed to have the capacity of multi-dimensional two-phase thermo-dynamic phenomena induced in the various phases of a nuclear system. To validate the performance of SPACE, a two-dimensional two-phase flow test was performed with slab geometry of the test section having a scale of $1.43m{\times}1.43m{\times}0.11m$. The test section has three inlet and three outlet nozzles on the bottom and top gap walls, respectively, and two outlet nozzles installed directly on the surface of the slab. Various kinds of two-dimensional air/water flows were simulated by selecting combinations of the inlet and outlet nozzles. In this study, two-dimensional two-phase void fraction profiles were quantified by measuring the local gap impedance at 225 points. The flow conditions cover various flow regimes by controlling the flow rate at the inlet boundary. For each selected inlet and outlet nozzle combination, the water flow rate ranged from 2 to 20 kg/s, and the air flow rate ranged from 2.0 to 20 g/s, which corresponds to 0.4 to 4 m/s and 0.2 to 2.3 m/s of the superficial liquid and gas velocities based on the inlet port area, respectively.

• 대한치과보철학회지
• /
• 제37권4호
• /
• pp.506-515
• /
• 1999

Dental practice can produce and spread some infectious diseases from patients to dentist, dental assistant, and dental labors. One possible method for preventing these cross-contamination is to immerse dental impression in chemical disinfectants. So for many investigators studied on the dimensional changes of dental impressions and on the surface qualities of stone casts made from impression following immersion in disinfectants. This study was proposed to evaluate some popular impression disinfectant combination from the point of dimensional stability. Impression was taken from dental arch-shaped metal model. Irreversible hydrocolloid and 3 elastomers(polyvinyl siloxane, polysulfide, polyether) were immersed in 3 disinfectants (2% glutaraldehyde, 1% povidone-iodine, 0.5% sodium hypochlorite) for 10 minutes and measured both cross-arch and anterior-posterior distance under stereo microscope to evaluate dimensional change. The results obtained were as follows: 1. Dimensional changes of irreversible hydrocolloid impression was statistically different in cross-arch and anterior-posterior distance when immersed in 2% glutaraldehyde solution and in anterior-posterior distance when immersed in 0.5% sodium hypochlorite solution from control group (p<0.05). 2. Dimensional changes of polyvinyl siloxane and polysulfide impression were not statistically different from control group (p>0.05). 3. Dimensional changes of polyether impression was statistically different in cross-arch distance when immersed in 0.5% sodium hypochlorite solution and in anterior-posterior distance when immersed in 1% povidone-iodine solution from control group (p<0.05). 4. In all cases, dimensional changes were less than 0.1% from the original dimension and concluded clinically acceptable.

• 한국측량학회지
• /
• 제20권2호
• /
• pp.111-118
• /
• 2002

오늘날 측량장비 개발의 급속한 발전과 더불어 정밀도가 많이 향상되고 있고 컴퓨터를 이용한 지형공간정보체계기술의 발달로 더욱 정밀한 3차원 지형의 재현이 가능하게 되었다. 그런데 실제 현장에서 이루어지고 있는 면적 및 체적산출방법에 있어서는 재래적인 측량방법인 평판측량으로 지형을 만들어낸 후 구적기나 기타 다른 방법을 통해서 2차원 면적을 산출한다. 여기에 일정량의 경사보정계수를 곱하여 3차원 면적을 산출하는 방법을 사용하고 있다. 본 연구에서는 재래적인 측량방법 및 면적산출방법에 대한 비효율성 및 비정밀성을 제시하고 광파거리측량기와 GPS를 이용하여 불규칙삼각형방식과 격자형방식으로 측량을 실시하였다. 두 가지 측량데이터를 가지고 각각의 방법에 따라 3차원 지형모델을 구축한 후 2차원 및 3차원 면적을 산출하였으며 재래적인 측량방법을 이용한 면적산출량을 기준으로 불규칙삼각형방식과 격자형방식으로 산출한 면적산출량을 비교 분석함으로써 정밀하고 효율성이 높은 3차원 면적산출기법을 제시하였다.

• 대한치과기공학회지
• /
• 제23권1호
• /
• pp.95-106
• /
• 2001

The purpose of this study was to show the method of three-dimensional morphometry developed recently and to compare the accuracy of three-dimensional morphometry with those of PA cephalometry, The three-dimensional morphometry analysis program and device were developed. Steel balls (1.2mm in diameter) were attached in twenty five landmarks of artificial human skull. This artificial human skull was used as experimental materials. From three-dimensional morphometry and PA cephalometry of artificial human skull. eleven linear measurements were acquired and made into asymmetry index. Right-left differences of measurements were used as asymmetry index. These measurements and asymmetry index were compared respectively with those of actual. The results were as follows: 1. Mean difference between three-dimensional morphometry and actual artificial human skull in linear measurements was $1.99{\pm}0.37mm$, and mean difference between PA cephalometry and actual was $21.12{\pm}0.45mm$. Both of all were reduced more than those of actual. 2. Mean difference between three-dimensional morphometry and actual artificial human skull in asymmetry index was $0.07{\pm}0.42$, and mean difference between PA cephalometry and actual was $3.63{\pm}0.60$. Three-dimensional morphometry was reduced while PA cephalometry was magnified more than that of actual. 3. Each eleven asymmetry index of three-dimensional morphometry was the same negative sign as those of actuals while only N-Z, ANS-J, Tr-Go, Tr-ANS asymmetry index were the same in PA cephalometry. These results suggest that the method of three-dimensional morphometry is more accurate than those of PA cephalometry in asymmetry analysis.

• 센서학회지
• /
• 제23권6호
• /
• pp.392-396
• /
• 2014

The 2-dimensional silicon vertical Hall devices, which are sensitive to X,Y components of the magnetic field parallel to the surface of the chip, are fabricated using a modified bipolar process. It consists of the thin p-layer at Si-$SiO_2$ interface and n-epi layer to improve the sensitivity and influence of interface effect. Experimental samples are a sensor type K with and type J without $p^+$ isolation dam adjacent to the center current electrode. The results for both type show a more high sensitivity than the former's 2-dimensional vertical Hall devices and a good linearity. The measured non-linearity is about 0.8%. The sensitivity of type J and type K are about 66 V/AT and 200 V/AT, respectively. This sensor's behavior can be explained by the similar J-FET model.

• 한국자동차공학회논문집
• /
• 제18권3호
• /
• pp.43-52
• /
• 2010

In this study, the shapes of the wheel and rail are represented by using 3-dimensional surface functions with surface parameters and a 3-dimensional wheel-rail contact analysis is presented. A whole numerical solution of wheel-rail contact at tread and flange including 2-point contacts can be achieved with the proposed numerical algorithm. Kinematic characteristics such as variances of vertical displacement and roll angle, and variance of wheel radius difference for arbitrary yaw and lateral displacement of wheelset, are determined for the KTX wheel-rail pair as an example. The condition of yaw and lateral displacement occurring 2-point contacts to analyze derailment are compared between standard and worn wheels. Differences of contact characteristics between curved and straight rails are also analyzed.

• 한국전기전자재료학회논문지
• /
• 제20권8호
• /
• pp.697-700
• /
• 2007

A novel 2-Dimensional Suppressed Sidewall Injection Magnetotransistor (SSIMT) with high linearity has been fabricated on the standard CMOS technology and experimentally verified. The novel 2-Dimensional SSIMT overcomes the restriction of the standard CMOS technology. Experimental results of the fabricated 2-Dimensional SSIMT show that the variation of each collector output currents are extremely linear as a function of magnetic field from -200mT to 200mT at $I_B = 1 mA,\;V_{CE} = 5 V\;and\;V_{SE} = 5 V$. The relative sensitivity shows up to 13 %/T. The measured nonlinearity of the fabricated device is about 0.9%.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제27권2호
• /
• pp.83-96
• /
• 2020

In this paper we study Biharmonic curves, Legendre curves and Magnetic curves in three dimensional f-Kenmotsu manifolds. We also study 1-type curves in a three dimensional f-Kenmotsu manifold by using the mean curvature vector field of the curve. As a consequence we obtain for a biharmonic helix in a three dimensional f-Kenmotsu manifold with the curvature κ and the torsion τ, κ² + τ² = -(f² + f'). Also we prove that if a 1-type non-geodesic biharmonic curve γ is helix, then λ = -(f² + f').