• 한국농촌생활과학회지
• /
• 제8권2호
• /
• pp.83-91
• /
• 1997

In this study, the dyeability of natural dye extracted from chesnut shell was investigated in order to explore the using of discarded chesnut shell in natural dyeing. Dyeing experiments were done in various dyeing conditions which were different in dyeing temperature, concentration of dyebath, dyeing time, repitition of dyeing. pH of dyebath and mordant with 3 kinds of experimental fabrics silk, nylon and cotton. Color and color difference ($\Delta$ E) of every dyed fabrics were measured and color fastness to drycleaning, washing, perspiration and light were measured. The results were as follows ; 1. The dyebath became thicker with time and temperature of extraction and the characteristics of dyebath prepared chesnut shell 1g : distilled water 30㏄ after 3 hrs-boiling were 32,400ppm and 3.7pH. 2. The dyeabilities of silk and nylon fabrics were good and color difference was increased with dyeing temperature, concentration of dyebath, dyeing time, number of repitition and acidity of dyebath. But the dyeability of cotton was very poor compared to silk and nylon. 3. Without the treatment of mordant, the dyeability of silk was little lower than that of nylon, but after the treatment of mordants it became higher than nylon. After the treatment of mordant Cu and Fe, the dyeability of cotton was increased although the natural dye from the chesnut shell was hardly absorved in cotton without mordant. 4. On the whole, the colorfastness of dyed silk and nylon were very good except the colorfastness to washing in silk and the colorfastness to light in nylon.

• 한국인쇄학회지
• /
• 제24권1호
• /
• pp.45-57
• /
• 2006

Offset lithography is the most widely used printing process in domestic printing industry, but there are no industry-wide specifications for press control to assure consistent quality across printing plants. As printing becomes more of a commodity and less of an art, it is necessary to develop a print quality specification standard suitable for Korea offset printing field. This study aims to contribute to improving the quality of domestic offset color prints by comparative study on color reproduction properties of 2 kinds of domestic process color ink composed of C(cyan), M(magenta), Y(yellow) and K(black) and of 3 kinds of domestic coated paper, using colorimetric color measurement method.

• 한국인쇄학회지
• /
• 제23권2호
• /
• pp.77-92
• /
• 2005

Offset lithography is the most widely used printing process in domestic printing industry, but there are no industry-wide specifications for press control to assure consistent quality across printing plants. As printing becomes more of a commodity and less of an art, it is necessary to develop a print quality specification standard suitable for Korea offset printing field. This study aims to contribute to improving the quality of domestic offset color prints by comparative study on color reproduction properties of 3 kinds of domestic process color ink composed of C(cyan), M(magenta), Y(yellow), and K(black), and of 3 kinds of domestic coated paper, using densitometric color measurement method.

• 한국식생활문화학회지
• /
• 제30권2호
• /
• pp.206-212
• /
• 2015

The purpose of this study was to investigate the quality characteristics of cookies containing Ligularia fischeri powder (0, 1, 2, 3, 4%) substituted for flour. This study measured the density, pH, spread ratio, volume, color values, hardness, and sensory properties of cookies. The pH of cookie dough significantly decreased in response to addition of Ligularia fischeri powder (LFP) at all levels. The spread factor of cookies also significantly increased with higher LFP content. In addition, Hunter's color L, a, and b values significantly decreased with increasing LFP content. According to hardness measurement, substitution of 1~4% LFP resulted in increased hardness compared to the control. In the sensory evaluation, sensory scores for color, flavor, and overall acceptability were highest in 2% Ligularia fischeri powder cookies. Thus, our results suggest that the optimum amount of Ligularia fischeri powder added to cookies was 2%. These results suggest that Ligularia fischeri powder can be applied to cookies to achieve high quality and functionality.

• 대한화장품학회지
• /
• 제22권2호
• /
• pp.76-88
• /
• 1996

The facial color is affected by age increase, health condition, internal and/or external environment factors and so on. Especially, the external environment factors in accordance with the influence of environment pollution that is air pollution, exert a bad influence of skin. The object of this study shall be quantified the facial color change in accordance with age increase, external environment factors. Therefore we have make the measurement about the facial color change of Korean women by regional groups. We've quantified through correlation equation, the rate of the many external environment factors which influence the facial color change (air pollution, climate condition, season etc.) As the result of the study, we have reach to know that CO, $O_3$, $NO_2$ has high relation with hue, value, chrome change. The facial color change is proved to be influenced atmospheric environment condition. Besides in hue and value in relation with meteorology demonstrates its link with the temperature, the evaporation quantity, the duration of sunshine of each region. Therefore we have instill cognition of the environmental pollution in accordance with external environment factor that was quantified. And we have reach to know this study affects cosmetics development of new concept.

• 한국연초학회지
• /
• 제16권1호
• /
• pp.26-33
• /
• 1994

A tobacco ripeness grading meter was designed and constructed using the color sensor, its performance was evaluated. A degree of ripeness grading of a leaf is very closely related to the measured tobacco leaf color. Measuring the small amount of the reflectance precisely depends on the apparatus including color sensor, light source, detector sensitivity, and geometric characteristics of appratus. To analyze and minimize the variational effects, experiments to select the proper condition were performed. Because of the combined effect mentioned above, the system has some variation on its response. Basis on the results of the experiments, prototype was developed and interfaced to a computer system. The main components of prototype included a tungsten lamp as a light source, Amorphous full color sensor with three filters, regulated D.C. power supply, OP - AMP(741 TC) for amplification, AR - B3001 board for interfacing to a computer with analog to digital conversion, and a compatible IBM PC XT computer. The experimental results of the developed ripeness tobacco leaf measurement system are summarized as following: [1] The output readings of ripeness grade meter for tobacco leaf, which is based on harvesting time, showed the apparent difference in variety of different quality. It was considered suitable that three filters(red, green, blue) in Amorphous full color sensor could be used in four different ripeness degree measurement of tobacco leaf. [2] The output readings of ripeness grade meter for tobacco leaf, which is based on government procurement, showed apparent difference in variety of different quality. Tobacco leaf varieties to stalk position are divided into tips, leaf, cutters, and primings, It is considered suitable that only red filter in the sensor could be used to classify the grade of tobacco leaf within the same kind tobacco stalk. However, the ripeness grade meter was not adequate to classify all the tobacco grades in the four different tobacco leaves.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.25-32
• /
• 2020

본 논문에서는 OLED 패널에 영상을 디스플레이 하면서 패널 불량 검사 및 광학 측정을 이용하여 색 좌표 및 휘도를 보상할 수 있는 OLED 패널 테스트를 위한 영상 발생기를 제안한다. 제안된 영상 발생기는 영상 발생 과정과 광학 측정을 이용한 색 좌표 및 휘도를 보상하는 과정 등의 2가지 과정으로 구성된다. 영상 발생 과정은 패널을 구동하기 위한 패널의 정보를 셋팅하고, 패널 정보에 맞게 영상 발생기의 출력 셋팅을 조절하여 영상을 출력한다. 영상의 출력 형태는 디지털 RGB 방식으로 구성된다. 영상발생기 내부의 패턴 발생 알고리즘은 패널의 해상도에 맞게 동기 신호를 기준으로 24비트 데이터 라인에 색데이터를 전송하는 방식으로 칼라 및 그레이 계열 영상 데이터를 출력한다. 광학 측정을 이용한 색 좌표 및 휘도를 보상하는 과정은 영상 발생기에서 영상을 OLED 패널에 출력하고, 광학 모듈로 측정한 색 좌표 및 휘도 데이터를 기준 데이터보다 차이나는 부분을 보상한다. 본 논문에서 제안된 OLED 패널 테스트를 위한 영상 발생기의 정확성을 평가하기 위해서 Xilinx 사의 Spartan 6 계열의 XC6SLX25-FG484 FPGA를 사용하였고 설계 툴은 ISE 14.5를 사용하였다. 영상 발생 과정의 출력은 오실로스코프를 이용한 디지털 RGB 출력에 대하여 목표로 한 설정 값과 시뮬레이션 결과 값이 일치함을 확인 할 수 있었다. 광학 측정을 이용한 색 좌표 및 휘도를 보상한 데이터는 패널 제조업체에서 제시한 오차율 이내의 정확도를 나타내었다.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.313-321
• /
• 2011

Purpose: The purpose of this study was to compare color parameters of different fabrication method of Lava ceram powder, Lava DVS blocks, IPS e.max ceram and IPS e.max zirpress. Methods: The three available shades(A1, A2, A3.5) of Lava & Kavo zirconia blocks were examined. For each of three colors, three different thickness were tested, 5 times of measurement frequency. The measurements were made using a spectrophotometer equipped with an integrating sphere using the CIE $L^*$, $a^*$, $b^*$ colorimetric system. Results: Lava build-up group and Lava DVS group showed clinically perceived color difference, on the other hand IPS e.max build-up group and IPS e.max zirpress group did not show clinically perceived color difference to shade allowed on core. When the thickness of porcelain veneer increased from Lava and IPS e.max groups, color differences(${\Delta}E$) were decreased. Conclusion: All-ceramic system has color characteristics that clinicians have to consider when selecting materials. Also, manufacturers of different porcelain systems must make every effort to achieve color reproducibility.

• 상하수도학회지
• /
• 제18권3호
• /
• pp.377-384
• /
• 2004

In the present study, a feasibility of an advanced oxidation process using UV/Hydrogen peroxide($H_2O_2$) system equipped with a medium pressure lamp for secondary effluent reclamation was investigated. Initial concentration of $H_2O_2$ and pH were changed to determine the optimum operation condition for the system. The removal efficiency of color was than 80% with 14.3mg/L of initial $H_2O_2$ and 5 minute of contact time in the UV/$H_2O_2$ system. The color removal was analyzed using first-order reaction equation. The dependence of rate constant (k) on initial $H_2O_2$ represented the rational relationship with maximum value. Residual $H_2O_2$ caused increase of effluent COD, since analyzing agent, dichromate, reacted with $H_2O_2$ in the sample. Therefore, excess initial concentration of $H_2O_2$ would significantly affect effluent COD measurement. At pH variation experiment, both residual $H_2O_2$ and color showed peak in the neutral pH range with the same pattern. Effect of $H_2O_2$ dose also enhanced color removal but raised residual $H_2O_2$ problem in the continuous operation UV system. In conclusion, these results indicated that medium pressure UV/$H_2O_2$ system could be used to control color in the secondary effluent for reclamation and reuse.

• 한국분무공학회지
• /
• 제4권1호
• /
• pp.13-18
• /
• 1999

It has been known that spray characteristics have an important effect on the mixture formation and directly influence the engine performances and the emissions. Up to now, the measurement of droplet size is well developed such as PDPA and PMAS though the behavior of small droplets during secondary atomization is not clear. Particle image velocimetry(PIV), a planar measuring technique, is a very efficient tool for studying complicated behavior and a fast and reliable method to track numerous droplets during injection. In this study, two-color scanning PIV is designed to obtain quasi-instantaneous two dimensional velocity data by using he-ion laser, rotating mirror and beam splitter. This PIV method which has high temporal and spatial resolution provides the information about the small complex droplet behavior.