• Journal of Aquaculture
• /
• v.7 no.1
• /
• pp.9-20
• /
• 1994

To find out suitable indoor rearing tank shape and stocking density of the abalone Haliotis discus hannai, young abalones were reared in the square or ellipse shape tanks with various stocking densities and were fed dried sea mustard, Undaria Pinnatifida HARVEY for three years. There were no significant differences between the square rearing tank and the ellipse one in growth rate and survival rate. With regard to vertical design of rearing tanks with three floors, the significant differences were not found among culture floors. However, the growth and survival rates of young abalones from the running water system were significantly higher than those of the abalones from the circulating system (P< 0.05). For the stocking density experiment with 1,000, 1,500 and 2,000 individuals of 20 mm young abalone, there was no significant differences in growth and survival rates among these groups. However, in that of 200-400 individuals of 40 mm abalone and 100-300 individuals of 50 mm abalone, the lower stocking density of young abalone showed the higher growth and survival rates. The lower stocking density and the smaller size of young abalones showed the higher daily feeding rate and feed efficiency.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.922-934
• /
• 2010

To arrange artificial reefs for marine afforestation effectively, tidal currents were analyzed by numerical experiments, and particle tracking based on tidal currents was carried out to clarify the path of algae spores. The experiments were conducted by the Environmental Fluid Dynamics Code (EFDC), and water column was vertically divided into five layers. Tidal current patterns were showed to be affected by main currents outside of the study area, and two circle currents were observed during the analysis of residual currents. Particle tracking lasted 15 days at three installation places where artificial reefs for marine afforestation could be deployed. According to the results of the particle tracking experiment, particle movements at the No.1 and No. 3 stations were belt types along the coastal line. The No. 2 station documented an ellipse type movement 300~500m from coast line. These results suggest that artificial reefs for marine afforestation should be installed in the belt zones at of the No. 1 and No. 3 stations, and in the ellipse zone at the No. 2 station.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.439-446
• /
• 2017

Portable low-cost Kinect sensor was used to analyze standing balance ability of the elderly. Eighty subjects who can walk alone and have a normal cognitive level participated in this experiment. Based on Berg Balance scale (BBS) test with 52 points, subjects were divided into Healthy older (HO: 46 persons, BBS: $53.80{\pm}1.19$) and Impaired older (IO: 34 persons, BBS: $49.06{\pm}2.03$) group. Each subject performed 30 seconds four different standing balance tests (EO: Eyes Open, EC: Eyes Close, EOf: Eyes Open on foam, ECf: Eyes Close on foam). Five variables (Mean distance, Range of distance, Root mean square, Mean velocity, 95% ellipse area) were calculated from the hip joint center movement of Kinect sensor. Results showed that there were significant differences between groups for four different standing tests. Calculated variables from kinect sensor showed significant correlation with BBS score. Especially, mediolateral mean distance, mediolateral root mean square, mediolateral range of distance and 95% ellipse area showed discriminative ability for all tests. Mean values of variables of IO were higher than those of HO, which means the decreased balance ability in IO compared with HO. Therefore, it was possible to estimate simple balance assessment of the elderly using portable low-cost Kinect sensor.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.1-8
• /
• 2005

In this paper, we propose a two-stage head tracking algorithm adequate for real-time active camera system having pan-tilt-zoom functions. In the color convergence stage, we first assume that the shape of a head is an ellipse and its model color histogram is acquired in advance. Then, the min-shift method is applied to roughly estimate a target position by examining the histogram similarity of the model and a candidate ellipse. To reflect the temporal change of object color and enhance the reliability of mean-shift based tracking, the target histogram obtained in the previous frame is considered to update the model histogram. In the updating process, to alleviate error-accumulation due to outliers in the target ellipse of the previous frame, the target histogram in the previous frame is obtained within an ellipse adaptively shrunken on the basis of the model histogram. In addition, to enhance tracking reliability further, we set the initial position closer to the true position by compensating the global motion, which is rapidly estimated on the basis of two 1-D projection datasets. In the subsequent stage, we refine the position and size of the ellipse obtained in the first stage by using shape information. Here, we define a robust shape-similarity function based on the gradient direction. Extensive experimental results proved that the proposed algorithm performs head hacking well, even when a person moves fast, the head size changes drastically, or the background has many clusters and distracting colors. Also, the propose algorithm can perform tracking with the processing speed of about 30 fps on a standard PC.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.2
• /
• pp.71-84
• /
• 2000

In this study, design characteristics of Village Parks in Seoul are investigated through an analysis of structuring themes expressed in spatial design. The goals and objectives of this study are: to emphasize the significance of design themes; and to demonstrate an approach to the design of landscapes through an analysis of structuring themes. For conducting this study, geometric forms and naturalistic forms were examined first. That is, the following 15 structuring themes were examined, as guiding themes: the 90$^{\circ}$rectangular theme; the 45$^{\circ}$/90$^{\circ}$angular theme; the 30$^{\circ}$/60$^{\circ}$ angular theme; circles on circle; concentric circles and radii; arcs and tangents; circle segments; the ellipse; the spiral; the meander; the free ellipse and scallops; the free spiral; the irregular polygon; the organic edge; and clustering and fragmentation. Forty five Village Parks in Seoul, built between 1996 and 1997, were analyzed through these 15 structuring themes. An analysis of Village Parks was conducted by the following two categories: land shape and structuring themes; and design directions and structuring themes. The research results are as follows; 1) Geometric forms are more frequently applied than naturalistic forms. 2) Regardless of land shape, geometric forms derived from simple primary shapes, the square and the circle, are frequently used. And the meander and the irregular polygon among naturalistic forms are frequently used. 3) Regarding design directions and structuring themes, design concepts, symbolic meanings and spatial forms are, to some degree, integrated. 4) The spiral is not applied among geometric forms. And the meander and the irregular polygon, as naturalistic forms, are frequently utilized. Research findings obtained from this study could be used in the designing of future Village Parks. For a profound study, future, research is needed in two-dimensional plans and three-dimensional elements of Village Parks.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.3
• /
• pp.295-302
• /
• 2014

An internal gear pump is required to improve the flow rate and noise. Furthermore, such pumps are durable and small in size. In this study, equations of the rotor shape with multiple profiles (ellipse 1-involute-ellipse 2) were derived, and relevant performance parameters (pressure angle, irregularity, and specific sliding) of the internal gear pump to noise were predicted and compared. Rotor profiles and performance parameters were obtained by a prediction algorithm for theoretical analysis, and the effects between the design parameters and the performance parameters were analyzed. Based on the analysis results of the effects, an optimal design of the rotor profile was proposed, and a noise test of the prototype was performed to evaluate the reliability of the design.

• Nuclear Engineering and Technology
• /
• v.43 no.2
• /
• pp.133-140
• /
• 2011

In this paper, a deformation measurement technology for nuclear fuel rods is proposed. The deformation measurement system includes a high-definition CMOS image sensor, a lens, a semiconductor laser line beam marker, and optical and mechanical accessories. The basic idea of the proposed deformation measurement system is to illuminate the outer surface of a fuel rod with a collimated laser line beam at an angle of 45 degrees or higher. For this method, it is assumed that a nuclear fuel rod and the optical axis of the image sensor for observing the rod are vertically composed. The relative motion of the fuel rod in the horizontal direction causes the illuminated laser line beam to move vertically along the surface of the fuel rod. The resulting change of the laser line beam position on the surface of the fuel rod is imaged as a parabolic beam in the high-definition CMOS image sensor. An ellipse model is then extracted from the parabolic beam pattern. The center coordinates of the ellipse model are taken as the feature of the deformed fuel rod. The vertical offset of the feature point of the nuclear fuel rod is derived based on the displacement of the offset in the horizontal direction. Based on the experimental results for a nuclear fuel rod sample with a formation of surface crud, an inspection resolution of 50 ${\mu}m$ is achieved using the proposed method. In terms of the degree of precision, this inspection resolution is an improvement of more than 300% from a 150 ${\mu}m$ resolution, which is the conventional measurement criteria required for the deformation of neutron irradiated fuel rods.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.4
• /
• pp.93-101
• /
• 2004

A face boundary can be approximated by an ellipse with five-dimensional parameters. This property allows an ellipse detection algorithm to be adapted to detecting faces. However, the construction of a huge five-dimensional parameter space for a Hough transform is quite unpractical. Accordingly, we Propose a selectively attentional Hough transform method for detecting faces from a symmetric contour in an image. The idea is based on the use of a constant aspect ratio for a face, gradient information, and scan-line-based orientation decomposition, thereby allowing a 5-dimensional problem to be decomposed into a two-dimensional one to compute a center with a specific orientation and an one-dimensional one to estimate a short axis. In addition, a two-point selection constraint using geometric and gradient information is also employed to increase the speed and cope with a cluttered background. After detecting candidate face regions using the proposed Hough transform, a multi-layer perceptron verifier is adopted to reject false positives. The proposed method was found to be relatively fast and promising.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.3
• /
• pp.293-301
• /
• 2016

Objective: The purpose of this study was to analyze the effects of freezing of gait and visual information on the static postural control ability in patients with Parkinson's Disease (PD) during the bipedal stance with feet together. Method: This study included a total of 36 patients with PD; the freezer group included 17 PD patients (age: $69.3{\pm}6.2yrs$, height: $159.6{\pm}9.0cm$, weight: $63.4{\pm}9.78kg$) and the nonfreezer group included 19 PD patients (age: $71.4{\pm}5.6yrs$, height: $155.8{\pm}7.1cm$, weight: $57.7{\pm}8.6kg$). Static postural control ability was analyzed using variables of center of pressure (COP) and dividing by mediolateral, anteroposterior, and integration factors during a bipedal stance with the eyes open and closed. Results: Freezers and nonfreezers showed increases in anteroposterior velocity, mediolateral velocity, averaged velocity, and mediolateral 95% edge frequency when visual information was blocked. Additionally, freezers had greater anteroposterior range, 95% confidence ellipse area, and COP anteroposterior mean position than nonfreezers. Conclusion: Freezers and nonfreezers showed a reduction in static postural control ability when visual information was blocked. Additionally, the results of this study found a significant difference in static postural control ability between freezers and nonfreezers with PD. In particular, anteroposterior range, 95% confidence ellipse area, and COP anteroposterior mean position might be used to distinguish between freezers and nonfreezers with PD.

• Journal of Educational Research in Mathematics
• /
• v.17 no.2
• /
• pp.111-125
• /
• 2007

In this article, we introduce an example about 'computers and mathematics education' and discuss its educational meaning. First, we survey two microworlds of Logo and DGS, which are two different representation systems for geometric phenomena. And we propose needs of connecting two microworlds with common perspective. And we suggest a mediation model that connects two representations in a microworld. Using this mediation model(Circle model), we construct a circle, a ellipse, and a cardioid with two different representations. It is important that the mediation model makes it possible that we translate descriptions from one representation into the other, and guess perimeters of planar curves. We also discuss roles and mathematical implications of this mediation model by error case in calculating perimeters of ellipses.