• 동력기계공학회지
• /
• 제3권2호
• /
• pp.89-97
• /
• 1999

In this paper the forming simulations of ellipse bulge have been researched by using $PAM-STAMP_{TM}$ to estimate the sheet metal forming and the plastic deformation characteristic of ellipse bulge. Thin elliptical diaphragms of brass, copper, aluminum, and mild steel are bulged in elliptical dies having aspect ratios of 1.33 and 2. In order to compare the simulation results with the experiment and ellipse bulge's theory derived by using Johnson and Duncan's theory, the relations of hydraulic pressure and polar height, polar thickness strain and polar height, were compared. According to this study, the results of simulation and ellipse bulge's theory derived by using Johnson and Duncan's theory, and the bursting pressure and the bursting polar height are good agreement to the experiment. So, the results of simulation by using $PAM-STAMP_{TM}$ and the ellipse bulge's theory will give engineers good information to make assessment the formability and plastic deformation characteristic of hydraulic ellipse bulge test.

• 한국CDE학회논문집
• /
• 제9권4호
• /
• pp.277-285
• /
• 2004

In this paper, a 2 DOF haptic yawing joystick for use as the navigation input device in virtual environments is introduced. The haptic yawing joystick has 360° range for yawing motion and ±100° for pitching motion. The device can support weights of up to 26N for χ axis and 10N for axis with 10kHz of sampling rate. The size of the haptic yawing joystick is so small that it can be assembled on armrest of an arm chair and has relatively larger work space than other conventional 2 DOF joysticks. For the haptic yawing joystick, an ellipse navigation algorithm using the user's velocity in the virtual navigation is proposed. The ellipse represents the velocity of the user. According to the velocity of the navigator, the ellipse size is supposed to be changed. Since the path width of navigation environments is limited, the ellipse size is also limited. The ellipse navigation algorithm is tested in 2 dimensional virtual environments. The test results show that the average velocity of the navigation with the algorithm is faster than the average navigation velocity without the algorithm.

• 한국운동역학회지
• /
• 제18권2호
• /
• pp.19-27
• /
• 2008

이 연구는 요가 수련 그룹 7명과 비수련 그룹 7명을 대상으로 눈뜨고 눈감고 외발서기 시 COP 95% confidence ellipse area를 이용하여 균형 제어 능력을 평가하는데 그 목적이 있다. 요가 수련 그룹이 눈뜨고 눈감고 외발서기 모두에서 COP 전후 좌우 표준편차와 COP 95% confidence ellipse area가 비수련 그룹보다 유의하게 작게 나타나 요가 수련이 균형 제어 능력 개선에 영향을 미치는 것으로 나타났다. 요가 수련 그룹 내에서는 COP 전후 좌우 표준편차와 COP 95% confidence ellipse area 모두에서 눈뜨고 외발서기가 눈감고 외발서기보다 작게 나타나 시각이 균형 제어 능력에 영향을 미치는 것으로 나타났다. COP 95% confidence ellipse area는 균형 제어 능력 평가 시 분별력이 높은 변수로 생각되며, 차후 다양한 그룹과 많은 대상자를 이용하여 다른 변수들 간의 비교 분석을 통한 추가 연구가 기대된다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제1권2호
• /
• pp.73-77
• /
• 2012

This paper reports a combined depth- and model-based face detection and tracking approach. The proposed algorithm consists of four functional modules; i) color-based candidate region extraction, ii) generation of the depth histogram for handling occlusion, iii) rotation-invariant face region detection using ellipse fitting, and iv) face tracking based on motion prediction. This technique solved the occlusion problem under complicated environment by detecting the face candidate region based on the depth-based histogram and skin colors. The angle of rotation was estimated by the ellipse fitting method in the detected candidate regions. The face region was finally determined by inversely rotating the candidate regions by the estimated angle using Haar-like features that were robustly trained robustly by the frontal face.

• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.43-48
• /
• 2008

This paper proposes a new method for measuring the power of spherical and cylindrical lens with 6 points light source, which is composed of a LED and six holes, and magnification ellipse fitting algorithm. Each measured diagonal length of 6 points light source is determined by the target lens power. After finding the center position of each light point with threshold method, 3 axis-diagonal lengths were calculated. The long axis and short axis power of cylindrical lens can be calculated by using magnification ellipse fitting algorithm with the magnification relationships between the initial diagonal lengths and the measured diagonal lengths changed by lens power.

• Geomechanics and Engineering
• /
• 제23권5호
• /
• pp.455-466
• /
• 2020

This paper presents analysis of the interaction between tunnel and Qanat with a particular interest for the optimization of Qanat shape using the discrete element code, PFC2D, and the results will be compared with the FEM results of PLAXIS2D. For these concerns, using software PFC2D based on Discrete Element Method (DEM), a model with dimension of 100m ^⁎ 100 m was prepared. A circular tunnel with dimension of 9 m was situated 20 m below the ground surface. Also one Qanat was situated perpendicularly above the tunnel roof. Distance between Qanat center and ground surface was 8 m. Five different shapes for Qanat were selected i.e., square, semi-circular, vertical ellipse, circular and horizontal ellipse. Confining pressure of 5 MPa was applied to the model. The vertical displacement of balls situated in ground surface was picked up to measure the ground subsidence. Also two measuring circles were situated at the tunnel roof and at the Qanat roof to check the vertical displacements. The properties of the alluvial soil of Tehran city are: γ_dry=19 (KN/㎥), E= 750 (kg/㎠), ν=0.35, c=0.3(kg/㎠), φ=34°. In order to validate the DEM results, a comparison between the numerical results (obtained in this study) and analytical and field monitoring have been done. The PFC2D results are compared with the FEM results. The results shows that when Qanat has rectangular shape, the tensile stress concentration at the Qanat corners has maximum value while it has minimum value for vertical ellipse shape. The ground subsidence for Qanat rectangular shape has maximum value while it has minimum value for ellipse shape of Qanat. The vertical displacements at the tunnel roof for Qanat rectangular shape has maximum value while it has minimum value for ellipse shape of Qanat. Historical shape of Qante approved the finding of this research.

• 한국정보처리학회논문지
• /
• 제4권12호
• /
• pp.3200-3210
• /
• 1997

훼손된 타원 및 복잡한 형태의 영상에서 타원 검출에 최소자승법(LSM : Least Square Method)을 적용할 수 있는데 이는 데이터가 비정규 오류 분포를 따르거나 특이한점들이 있는 상태에서는 신뢰할 수 있는 결과를 얻을 수 없다. 특히 최소자승법은 훼손된 부분을 데이터가 없는 것으로 가정 하고 모든 데이터를 동일한 비중으로 연산하므로 훼손된 부분은 더욱 훼손된 모양으로 검출되는 문제점 있다. 본 논문에서 변형된 최소자승 법(MLSM: Modified Least Square Method)이란 훼손부분의 가까운점에 큰 비중을 둠으로 원래의 모양에 접근하는 형상(feature)의 타원을 검출하려는 것으로 훼손점 부근의 2점과 그외 중요한 l점을 강제로 만족하는 방법이다. 3점을 만족시키는 제한 조건을 주고 2개의 파라미터는 최소자승법으로 구하고, 나머지 3개는 제한 조건으로 구하여 타원 검출에 적용한 결과 실제 영상에서 타원의 검출 및 판별에 좋은 효과가 있었으며, 특히 인간의 치열의 곡선 모양을 결정하는테 좋은 효과가 있음을 보였다.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.614-622
• /
• 2011

An internal lobe pump is suitable for oil hydraulics of machine tools, automotive engines, compressors, constructions and other various applications. In particular, the pump is an essential machine element of an automotive engine to feed lubricant oil. The subject of this paper is the theoretical analysis of internal lobe pump whose the main components are the rotors: usually the outer one is characterized by lobe with multiple profile(ellipse1, involute and ellipse2) shapes, while the inner rotor profile is determined as conjugate to the other. Also, the design of outer rotor depends on new applications with removing carryover phenomenon. The system generates new lobe profile and calculates automatically the flow rate and flow rate irregularity according to the lobe profile generated. In order to obtain rotor shapes in performance and to find optimize the design parameters, a Taguchi method is proposed in this paper. Results obtained from the analysis enable the designer and manufacturer of oil pump to be more efficient in this field.

• 대한기계학회논문집A
• /
• 제39권2호
• /
• pp.169-177
• /
• 2015

내접형 기어펌프에 사용되는 지로터의 경우, 소결 공정기술의 발달로 복잡한 형상의 가공이 용이하며 내구성과 소형화의 장점이 있으나, 자동차의 연비효율 개선을 위한 유량증대 및 소음저감을 위한 연구가 요구되고 있다. 본 논문에서는 기존의 병진이동에 의한 지로터 치형의 형상조합 알고리즘이 가지는 형상 불연속성을 개선하기 위하여 회전이동 및 병진이동을 이용한 형상조합 알고리즘을 개발하였으며, 이를 토대로 개발된 설계 프로그램을 이용하여 3-타원이 조합된 경우와 타원 1-인벌루트-타원 2 이조합된 경우에 대해 치형형상을 도출하고, 형상에 따른 로터의 주요성능(유량, 유량맥동, 미끄럼률 및 압력각)을 계산하였다. 해석결과를 토대로 조합된 치형형상에 대한 최적설계를 수행하였으며, 기존 치형과의 성능 비교를 통하여 설계의 타당성을 검증하였다.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제22권1호
• /
• pp.25-34
• /
• 2015

In this paper we characterize the isogonal and isotomic conjugates of conic. Every conic can be expressed by a quadratic rational B$\acute{e}$zier curve having control polygon $b_0b_1b_2$ with weight w > 0. We show that the isotomic conjugate of parabola and hyperbola with respect to ${\Delta}b_0b_1b_2$ is ellipse, and that the isotomic conjugate of ellipse with the weight $w={\frac{1}{2}}$ is identical. We also find all cases of the isogonal conjugate of conic with respect to ${\Delta}b_0b_1b_2$. Our characterizations are derived easily due to the expression of conic by the quadratic rational B$\acute{e}$ezier curve in standard form.