• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.485-488
• /
• 2006

The most important thing in the container terminal is to handle the cargo effectively in the limited time. To achieve this object, many strategies have been introduced and applied to. If we consider the automated container terminal, it is necessary that the cargo handling equipments are equipped with more intelligent control systems. From the middle of the 1990's, an automated rail-mounted gantry crane(RMGC) and rubber-tired gantry crane(RTG) have been developed and widely used to handle containers in the yards. Recently, in these cranes, the many equipments like CCD cameras and sensors are mounted to cope with the automated terminal environment. In this paper, we try to support the development of more intelligent automated cranes which make the cargo handling be performed effectively in the yards. For this plant, the modelling, tracking control, anti-sway system design, skew motion suppressing and complicated motion control and suppressing problems must be considered. In this paper, the system modelling and a tracking control approach are discussed based on two-degree-of-freedom (2DOF) servosystem design.

• Journal of Institute of Control, Robotics and Systems
• /
• 제18권6호
• /
• pp.579-583
• /
• 2012

The purpose of this paper is to suggest IDE (Incremental Displacement Estimation) algorithm for the previously proposed visually servoed paired structured light system. The system is composed of two sides facing with each other, each with one or two lasers with a 2-DOF manipulator, a camera, and a screen. The 6-DOF displacement between two sides can be estimated by calculating the positions of the projected laser beams and rotation angles of the manipulators. In the previous study, Newton-Raphson or EKF (Extended Kalman Filter) has been used as an estimation algorithm. Although the various experimental tests have validated the performance of the system and estimation algorithms, the computation time is relatively long since aforementioned algorithms are iterative methods. Therefore, in this paper, a non-iterative incremental displacement estimation algorithm which updates the previously estimated displacement with a difference of the previous and the current observed data is introduced. To verify the performance of the algorithm, experimental tests have been performed. The results show that the proposed non-iterative algorithm estimates the displacement with the same level of accuracy compared to the EKF with multiple iterations with significantly less computation time.

• Structural Engineering and Mechanics
• /
• 제88권3호
• /
• pp.263-271
• /
• 2023

Base isolation is a widely used technique for the seismic control of structures as it reduces the structural seismic demand. However, displacement of the isolation layer is not economically feasible in congested urban areas. To resolve the issue, an innovative system is proposed here to isolate both horizontally at the base and vertically in the upper portion of the structure. A simplified linear three degree-of-freedom (3DOF) model of the system that considers the mass and stiffness ratios of the substructure has been introduced and analyzed in MATLAB by spectrum analysis. The 3DOF model results revealed that, when the period of the soft substructure reaches 2.5 times that of the stiff substructure, the isolation and the lower substructure responses decrease by 65% and 51%, respectively. Time-history analysis of a MDOF system at three frequency ratios under a wide range of ground motions indicated that, at the expense of accepting a certain large drift by the soft substructure in the upper portion of the structure, base isolation displacement can be decreased by 10%.

• Journal of Astronomy and Space Sciences
• /
• 제27권1호
• /
• pp.1-10
• /
• 2010

The distance distribution in our planetary system has been a controversial matter. Two kinds of important issues on Titius-Bode's relation have been discussed up to now: one is if there is a simple mathematical relation between distances of natural bodies orbiting a central body, and the other is if there is any physical basis for such a relation. We have examined, by applying it to exo-planetary systems, whether Titius-Bode's relation is exclusively applicable to our solar system. We study, with the $X^2$ test, the distribution of period ratios of two planets in multiple planet systems by comparing it with that derived from not only Titius-Bode's relation but also other forms of it. The $X^2$ value between the distribution of the orbital period derived from Titius-Bode's relation and that observed in our Solar system is 12.28 (dof=18) with high probability, i.e., 83.3 %. The value of $X^2$ and probability resulted from Titius-Bode's relation and observed exo-planetary systems are 21.38 (dof=26) and 72.2 %, respectively. Modified forms we adopted seem also to agree with the planetary system as favorably as Titius-Bode's relation does. As a result, one cannot rule out the possibility that the distribution of the ratio of orbiting periods in multiple planet systems is consistent with that derived from Titius-Bode's relation. Having speculated Titius-Bode's relation could be valid in exo-planetary systems, we tentatively conclude it is unlikely that Titius-Bode's relation explains the distance distribution in our planetary system due to chance. Finally, we point out implications of our finding.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제36권10호
• /
• pp.1171-1179
• /
• 2012

In this study, we consider a dynamic positioning system (DPS) design problem that can be extended to many application fields. Toward this end, tracking and positioning control problems are discussed. In particular, we design a tracking control system that incorporates an observer based on the 2-DOF servo system design approach in order to obtain the desired state information. In the case of observer design, a weighted $H_{\infty}$ error bound approach for a state estimator is considered. Based on an algebraic Riccati equation (inequality) approach, a necessary and sufficient condition for the existence of a full-order estimator that satisfies the weighted $H_{\infty}$ error bound is introduced. The condition for the existence of the estimator is denoted by a linear matrix inequality (LMI) that yields an optimized solution and the observer gain.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.70.2-70
• /
• 2002

In the thermal power plant, it is difficult to maintain strict control of the steam temperature in order to avoid thermal stress, because of variation of the heating value according to the fuel source, the time delay of changes in main steam temperature versus changes in fuel flow rate, difficulty of control on the main steam temperature control and the reheater steam temperature control system owing to the dynamic response characteristics of changes in steam temperature and the reheater steam temperature, fluctuation of inner fluid water and steam flow rates widely during load-following operation. Up to the present time, the PID controller has been used to operate this system...

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 한국방송공학회 1996년도 Proceedings International Workshop on New Video Media Technology
• /
• pp.83-87
• /
• 1996

A virtual reality system using video image is designed and implemented. A participant having 2{{{{ { 1} over { 2} }}}}DOF can interact with the computer-generated virtual object using her/his full body posture and gesture in the 3D virtual environment. The system extracts the necessary participant-related information by video-based sensing, and simulates the realistic interaction such as collision detection in the virtual environment. The resulting scene obtained by compositing video image of the participant and virtual environment is updated in near real time.

• Journal of Institute of Control, Robotics and Systems
• /
• 제8권7호
• /
• pp.599-606
• /
• 2002

A new method to govern the navigation of a mobile robot using hand gesture recognition is proposed based on the following two procedures. One is to achieve vision information by using a 2-DOF camera as a communicating medium between a man and a mobile robot and the other is to analyze and to control the mobile robot according to the recognized hand gesture commands. In the previous researches, mobile robots are passively to move through landmarks, beacons, etc. In this paper, to incorporate various changes of situation, a new control system that manages the dynamical navigation of mobile robot is proposed. Moreover, without any generally used expensive equipments or complex algorithms for hand gesture recognition, a reliable hand gesture recognition system is efficiently implemented to convey the human commands to the mobile robot with a few constraints.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제10권4호
• /
• pp.12-19
• /
• 2007

In this study, nonlinear flow-induced vibration(flutter) analyses of a 2-DOF launch vehicle airfoil have been conducted in supersonic and hypersonic flow regimes. Advanced aeroelastic analysis system based on computational fluid dynamics and computational structural dynamics is successfully developed and applied to the present analyses. Nonlinear unsteady aerodynamic analyses considering strong shock wave motions are conducted using inviscid Euler equations. Aeroelastic governing equations for the 2-DOF airfoil system is solved by the coupled integration method with interactive CFD and CSD computation procedures. Typical wedge type airfoil shapes with initial angle-of-attacks are considered to investigate the nonlinear flutter characteristics in supersonic(15). Also, the comparison of detailed aeroelastic responses are practically presented as numerical results.

• Structural Engineering and Mechanics
• /
• 제29권5호
• /
• pp.505-530
• /
• 2008

This paper proposes the application of active multiple tuned mass dampers (AMTMD) for translational and torsional response control of a simplified two-degree-of-freedom (2DOF) structure, able to represent the dynamic characteristics of general asymmetric structures, under the ground acceleration. This 2DOF structure is a generalized 2DOF system of an asymmetric structure with predominant translational and torsional responses under earthquake excitations using the mode reduced-order method. Depending on the ratio of the torsional to the translational eigenfrequency, i.e. the torsional to translational frequency ratio (TTFR), of asymmetric structures, the following three cases can be distinguished: (1) torsionally flexible structures (TTFR < 1.0), (2) torsionally intermediate stiff structures (TTFR = 1.0), and (3) torsionally stiff structures (TTFR > 1.0). The even distribution of the AMTMD within the whole width and half width of the asymmetric structure, thus leading to three cases of installing the AMTMD (referred to as the AMTMD of case 1, AMTMD of case 2, AMTMD of case 3, respectively), is taken into account. In the present study, the criterion for searching the optimum parameters of the AMTMD is defined as the minimization of the minimum values of the maximum translational and torsional displacement dynamic magnification factors (DMF) of an asymmetric structure with the AMTMD. The criterion used for assessing the effectiveness of the AMTMD is selected as the ratio of the minimization of the minimum values of the maximum translational and torsional displacement DMF of the asymmetric structure with the AMTMD to the maximum translational and torsional displacement DMF of the asymmetric structure without the AMTMD. By resorting to these two criteria, a careful examination of the effects of the normalized eccentricity ratio (NER) on the effectiveness and robustness of the AMTMD are carried out in the mitigation of both the translational and torsional responses of the asymmetric structure. Likewise, the effectiveness of a single ATMD with the optimum positions is presented and compared with that of the AMTMD.