• 한국해양공학회지
• /
• 제25권2호
• /
• pp.15-20
• /
• 2011

This study aimed at validating the adopted numerical methods to solve two-phase flow around a two-dimensional (2D) rectangular floating structure in regular waves. A structure with a draft equal to one half of its height was hinged at the center of gravity and free to roll with waves that had the same period as the natural roll period of a rectangular barge. In order to simulate the 2D incompressible viscous two-phase flow in a wave tank with the rectangular barge, the present study used the volume of fluid (VOF) method based on the finite volume method with a standard turbulence model. In addition, the sliding mesh technique was used to handle the motion of the rectangular barge induced by the fluid-structure interaction. Consequently, the present results for the flow field and roll motion of the structure had good agreement with those of the relevant previous experiment.

• 조명전기설비학회논문지
• /
• 제14권5호
• /
• pp.19-26
• /
• 2000

본 논문에서는 2개의 전기자 구조로된 대형 voice coil용 가동자석형 LDM을 대상으로, LDM의 추력 대 체적비를 고려하며 가동자의 칠섬익 체적올 추력의 감소없이 최적화함므로서 LDM의 응답 특성을 향상시킬 수 있는 방법에 대해 살펴보았다. 자기회로는 선형이라는 가정하에 LDM 해석을 수행하여 LDM의 가동자를 설계하였으며, 유한요소해석 소프트웨어인 Maxwell-2D에 의해서 철심의 포화를 고려한 가동자 철섬의 두께를 결정하였다. 이러한 결과에 대한 타당성은 기준형 LDM과 가동자 철심의 형상이 개선된 개선형 LDM의 2대를 설계, 제작한 실험 결과에 의해서 입증하였다.

• 한국수자원학회논문집
• /
• 제45권11호
• /
• pp.1093-1105
• /
• 2012

본 연구에서는 하천 범람에 따른 도시지역 내 홍수흐름의 특성을 수치적으로 모의하고 이에 대한 결과를 분석하였다. 적용된 수치모형은well-balanced HLLC 기법에 근간을 둔 2차원 유한체적모형이다. 대상영역은 경상남도 거제시에 위치한 고현천주변의 도시지역으로 2003년 9월에 발생한 태풍 "매미" 기간동안 집중호우로 인해 하천이 범람되어 피해가 발생되었다. 본 연구에서는 도시지역 내 범람에 대한 홍수흔적 자료를 이용하여 수치모형을 검증하였으며, 향후 발생 가능한 집중호우의 강도의 증가 또는 감소에 의한 유입량의 변화에 따른 도시지역 내에서의 홍수흐름의 특성에 대한 모의 및 분석을 수행하였다.

• Steel and Composite Structures
• /
• 제45권5호
• /
• pp.621-640
• /
• 2022

In the present article, the vibration response of a geometrically imperfect bi-directional functionally graded plate (2D-FGP) with geometric discontinuities and micro-structural defects (porosities) has been investigated. A porosity model has been developed to incorporate the effective material properties of the bi-directional FGP which varies in two directions i.e. along the axial and transverse direction. The geometric discontinuity is also introduced in the plate in the form of a circular cut-out at the center of the plate. The structural kinematic formulation is based on the non-polynomial trigonometric higher-order shear deformation theory (HSDT). Finite element formulation is done using C° continuous Lagrangian quadrilateral four-noded element with seven degrees of freedom per node. The equations of motion have been derived using a variational approach. Convergence and validation studies have been documented to confirm the accuracy and efficiency of the present formulation. A detailed investigation study has been done to evaluate the influence of the circular cut-out, geometric imperfection, porosity inclusions, partial supports, volume fraction indexes (along with the thickness and length), and geometrical configurations on the vibration response of 2D-FGP. It is concluded that after a particular cut-out dimension, the vibration response of the 2D FGP exhibits non-monotonic behavior.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1995년도 추계 학술대회논문집
• /
• pp.64-69
• /
• 1995

A computer code for solving the Reynolds averaged full Navier-Stokes equations has bent developed for analysis of gas and steam turbine cascade flows with the option of using one of two types of turbulence model. One is the Baldwin-Lomax model and the other is standard $k-{\varepsilon}$ model. The numerical integration is based on the explicit four stage Runge-Kutta scheme and finite volume method. To be verified, the resulting code is applied to VKI turbine cascade and compared with the previous experimental results. Finally, the flowfield around a steam turbine cascade is analyzed. Comparisons with experimental data show that present numerical scheme is an accurate Navier-Stokes solver and can give very good predictions for both gas and steam turbine cascade flow.

• 한국수자원학회논문집
• /
• 제48권11호
• /
• pp.957-967
• /
• 2015

측면 위어의 수위-유량 관계가 알려지지 않더라도, 저류지에 의한 홍수 조절 효과를 평가할 수 있는 2차원 수치모의에 대해 검토하였다. 수치해법으로서 천수방정식에 대해 유한체적법을 적용하고, 흐름률의 정확한 계산을 위해 근사 Riemann 해법을 도입하여 수심적분 2차원 수치모형을 구성하였다. 모의 결과를 수로와 저류지에서 자유월류와 잠긴 흐름이 발생되는 실험실 실험의 결과와 비교하였다. 자유 월류 상태에서 예측된 측면 위어의 유량 계수와 실험에 의한 그것 사이의 차이는 매우 작았다. 또한, 잠긴 흐름에 대한 모의 결과도 측정 결과와 잘 일치하였으며, 그 기구가 잘 재현되었다. 이 연구를 통해 2차원 수치모형으로 측면 위어에 대한 유량 계수를 정확하게 결정할 수 있으며, 저류지에 대한 홍수 방어능력의 검토 또한 상당한 수준의 정확도로 이루어질 수 있음이 확인되었다. 따라서 저류지의 계획, 설계안의 검토, 관리를 위한 기존 저류지의 평가 등에 이 모형의 실용적인 적용이 기대된다.

• Journal of Ship and Ocean Technology
• /
• 제3권2호
• /
• pp.1-16
• /
• 1999

The incompressible Reynolds-Averaged Navier-Stokes(RANS) equations are solved using the standard $\textsc{k}-\varepsilon$ turbulence model and a finite volume method(FVM)with an O-type grid system. The computed results for its performance test are in good agreement with the published experimental data. The present method is applied to the study on the leading edge radius of a hydrofoil section Calculated results suggest that the leading edge radius has some effects on cavitation performances of a 2-D foil. A natural leading edge radius for the NACA66 section is determined from this study.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.90-97
• /
• 1999

An implicit turbulent flow solver is developed for 2-D unstructured hybrid meshes. Spatial discretization is accomplished by a cell-centered finite volume formulation using an upwind flux differencing. Time is advanced by an implicit backward Euler time stepping scheme. Flow turbulence effects are modeled by the Spalart-Allmaras one equation model, which is coupled with wall function. The numerical method is applied for flows on a flat plate, the NACA 0012 airfoil, and the Douglas 3 element airfoil. The results are compared with experimental data.

• Steel and Composite Structures
• /
• 제49권2호
• /
• pp.197-213
• /
• 2023

To investigate the static properties of large high strength bolt shear connector in hybrid fiber-reinforced concrete (HFRC) and normal concrete (NC), eight push-out test specimens with single/double nut and HFRC/NC slabs were designed and push-out tests were conducted. A fine 3D nonlinear finite element (FE) model including HFRC constitutive model was established by using ANSYS 18.0, and the test results were used to verify FE models of the push-out test specimens. Then a total of 13 FE models were analyzed with various parameters including fiber volume fractions of HFRC, bolt diameter and thickness of steel flange. Finally, the empirical equations considering the contribution of polypropylene fiber (PF) and steel fiber (SF) obtained from the regression of the test results and FE analysis were recommended to evaluate the load-slip curve and ultimate capacity of the large high strength bolt shear connector embedded in HFRC/NC.

• Structural Engineering and Mechanics
• /
• 제86권4호
• /
• pp.519-533
• /
• 2023

This work focuses on the dynamic analysis of thermal barrier coated straight and curved turbine blades modelled as functionally graded sandwich panel under thermal environment. The pre- twisted straight/curved blade model is considered to be fixed to the hub and, the complete assembly of the hub and blade are assumed to be rotating. The functionally graded sandwich composite blade is comprised of functionally graded face-sheet material and metal alloy core. The constituents' material properties are assumed to be temperature-dependent, however, the overall properties are evaluated using Voigt's micromechanical scheme in conjunction with the modified power-law functions. The blade model kinematics is based on the equivalent single-layer shear deformation theory. The equations of motion are derived using the extended Hamilton's principle by including the effect of centrifugal forces, and further solved via 2D- isoparametric finite element approximations. The mesh refinement and validation tests are performed to illustrate the stability and accurateness of the present model. In addition, frequency characteristics of the pre-twisted rotating sandwich blades are computed under thermal environment at various sets of parametric conditions such as twist angles, thickness ratios, aspect ratios, layer thickness ratios, volume fractions, rotational velocity and blade curvatures which can be further useful for designing the blade type structures under turbine operating conditions.