• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.565-572
• /
• 2019

As a public research institute, government-supported institutes have led the industrial development and the advancement of science and technology in Korea. Robert Levering has annually selected 'Fortune 100 GPTW(Great Place to Work)' by measuring the Trust Index which was originated by himself. The objectives of this study are to attempt newly to analyze the inter-relations among 5 elements of GPTW trust index such as credibility, respect, fairness, camaraderie, and pride perceived by the K institute's 262 employees; to verify that GPTW trust index is valid for the selection of the fortune 100 GPTW. Amart PLS 2.0 and SPSS 18 were utilized for the statistical analysis. The results of this study are as follows. Credibility has positive effect to pride; respect has positive effect to pride and camaraderie; fairness has positive effect to camaraderie; and camaraderie has positive to pride. Pride and camaraderie have positive effect to the perceived GPTW. Recent studies mainly focused on the relations between GPTW trust index as independent, mediating variables or parameters and organizational performances. It is meaningful that this study has firstly tried to analyze the inter-relations among 5 elements of the trust index for the employees of research institute. This study has implication that the in order to enhance the performance the institute has to manage GPTW trust index perceived by the employees.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.76-82
• /
• 2019

This study has done to search for a solution to remove risk limitedly caused by separating weapon system acquisition from operation and maintenance at the view point of Logistic Commander who's responsible for stable operation and maintenance after acquiring weapon system. At the System development stage, unverified overhaul development plan may cause additional manpower and costs after the development, and furthermore it is likely to have risk to lower reliability of the military. Thus, research and development agency should write overhaul development plan at the System development stage, and it should be verified through evaluation and verification test. Secondly, during research and development, institutional supplementation is needed to calculate human and material resources writing overhaul development plan. Thirdly, it should be able to analyze proper operation & maintenance plan and cost for overhaul plan at the pre-investigation stage. Fourthly, the base which can develop overhaul concept and overhaul factors should be included in the need and need determination document. Lastly, for the weapon system which has small amount of high power figure, project management should be performed to be able to specify at the each acquisition level of weapon system to realize Article 28, clause 3 and 4 of Defense business law.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.918-925
• /
• 2017

Multiple reflections on exterior equipment with complex shape on naval ships cause unexpectedly high Radar Cross Section (RCS) distributions, and the directions of reradiated electromagnetic waves are hard to predict. Therefore, the optimum arrangement of exterior equipments should be considered according to the Radar Absorbing Structure (RAS) method. In this paper, the optimum arrangement for exterior equipments was determined to reduce multiple reflections and RCS even with complex shapes. The sequential descending arrangement method was used to establish an optimum arrangement algorithm. An LCS-2 type model was selected for optimum exterior equipment arrangements. In order to reduce computational cost, RCS distributions and multiple reflection path analysis of exterior equipments was carried out to select exterior equipments for optimum arrangement, and an optimum arrangement was determined to find positions with minimum RCS values. Also, the RCS reduction effect was analyzed using detectable radar range.

• Journal of Life Science
• /
• v.29 no.1
• /
• pp.84-89
• /
• 2019

Previous screening of novel antibacterial agents revealed that some bacterial isolates exhibited antibiotic activity against both gram-positive and gram-negative bacteria and that they showed antibacterial activity, even against methicillin-resistant Staphylococcus aureus (MRSA). Among these isolates, one bacterial strain, BCNU 1204, was identified as Pseudomonas aeruginosa using phenetic and phylogenetic analysis, based on 16S ribosomal RNA gene sequences. The maximum productivities of antimicrobial substances of BCNU 1204 were obtained after being cultured at $35^{\circ}C$ and pH 7.0 for 4 d in King's medium B (KMB). Dichloromethane (DCM) and ethylacetate (EA) extracts of P. aeruginosa BCNU 1204 exhibited strong antimicrobial activity, particularly against gram-positive bacteria. The EA extracts exhibited broad-spectrum activity against antibiotic resistant strains. Fraction 5-2, was obtained by recycling preparative liquid chromatography (LC) and preparative thin-layer chromatography (TLC) and was identified as phenazine-1-carboxylic acid belonging to phenazines using gas chromatography and mass spectrometry (GC/MS). Its minimum inhibitory concentration (MIC) values were $25{\mu}g/ml$, $50{\mu}g/ml$, ${\geq}25{\mu}g/ml$, and ${\geq}50{\mu}g/ml$ for MRSA CCARM 3089, 3090, 3091, and 3095 strains, respectively. P. aeruginosa BCNU 1204 may be a potential resource for the development of anti-MRSA antibiotics. Additional research is required to identify the active substance from P. aeruginosa BCNU 1204.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.2
• /
• pp.35-39
• /
• 2021

Photogrammetry using drone can produce high-resolution ortho image and acquire high-accuracy 3D information, which is useful. Therefore, this study attempted to determine the possibility of using drone-photogrammetry in park construction by producing a topographic map using drone-photogrammetry and analyzing the problems and accuracy generated during production. For this purpose, we created ortho image and DSM (digital surface model) using drone images and created topographic status map by vectorizing them. Accuracy was compared based on topographic status map by GPS (global positioning system) and TS (total station). The resulting of analyzing mean of the residuals at check points showed that 0.044 m in plane and 0.066 m in elevation, satisfying the tolerance range of 1/1,000 numerical maps, and result of compared lake size showed a difference of about 4.4%. On the other hand, it was difficult to obtain accurate height values for terrain in which existed vegetation when producing the topographic map, and in the case of underground buried objects, it is not possible to confirm it in the image, so direct spatial information acquisition was necessary. Therefore, it is judged that the topographic status map using drone photogrammetry can be efficiently constructed if direct spatial data acquisition is achieved for some terrain.

• Journal of Environmental Health Sciences
• /
• v.46 no.6
• /
• pp.719-725
• /
• 2020

Objectives: With the growth of national interest in fine particulate matter, many complaints about pollutants emitted from air pollution emitting facilities have arisen in recent years. In particular, it is thought that a large volume of particulate pollutants are discharged from workplaces that use Solid Refuse Fuel (SRF). Therefore, particulate contaminants generated from SRF were measured and analyzed in this study in terms of respective particle sizes. Methods: In this study, particulate matter in exhaust gas was measured by applying US EPA method 201a using a cyclone. This method measures Filterable Particulate Matter (FPM), and does not consider the Condensable Particulate Matter (CPM) that forms particles in the atmosphere after being discharged as a gas in the exhaust gas. Results: The mass concentration of Total Suspended Particles (TSP) in the four SRF-using facilities was 1.16 to 11.21 mg/Sm3, indicating a very large concentration deviation of about 10 times. When the fuel input method was the continuous injection type, particulate matter larger than 10 ㎛ diameter showed the highest particle size fraction, followed by particulate matter smaller than 10 ㎛ and larger than 2.5 ㎛, and particulate matter of 2.5 ㎛ or less. Contrary to the continuous injection type, the batch injection type had the smallest particle size fraction of particulate matter larger than 10 ㎛. The overall particulate matter decreased as the operating load factor decreased from 100% to 60% at the batch input type D plant. In addition, as incomplete combustion significantly decreased, the particle size fraction also changed significantly. Both TSP and heavy metals (six items) satisfied the emissions standards. The measured value of the emission factor was 38-99% smaller than the existing emissions factor. Conclusions: In the batch injection facility, the particulate matter decreased as the operating load factor decreased, as did the particle size fraction of the particulate matter. These results will help the selection of effective methods such as reducing the operating load factor instead of adjusting the operating time during emergency reduction measures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.345-353
• /
• 2021

This study examined the level of resilience and forgiveness, which are important factors of the future competencies of university students. First, a liberal arts course based on mindfulness theory, "Future Society and understanding of the human mind," was developed with expert validity. This class was opened as a liberal arts class. A test of resilience test and forgiveness scale were conducted before and after the class to determine if there was any change in the level of resilience and forgiveness of university students. There were 18 students in the experimental group and 21 general students in the control group attending S University in Seoul. In both groups, a structured resilience test and forgiveness scale were conducted before and after the experiment. SPSS 20.0 program was used for data processing, and the effectiveness was analyzed using a t-test, paired t-test, and cohen d score for the effect size. The group that showed an effect was verified by confirming the effect size to determine if it was meaningful. The analysis revealed a significant difference in the total resilience score and the sub-factors in positivity and control ability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.331-338
• /
• 2020

This study examined factors affecting the stages of exercise behavior among patients with rheumatoid arthritis. The analysis was based on data collected from 238 patients who enrolled at the medical center of D university. The participants showed 5 stages of exercise behavior: pre-contemplation 23.9%, contemplation 23.0%, preparation 33.2%, action 5.0%, and maintenance 29.0%. There were statistically significant differences in perceived barriers of exercise, exercise self-efficacy, and perceived health status according to the stage of exercise behavior of the subjects. It was found that among the barriers to exercise, physical and cognitive psychological factors significantly influenced the stages of exercise behavior. Also, exercise self-efficacy significantly affected the stages of exercise behavior. Thus, for rheumatoid arthritis patients to practice and maintain proper exercise behavior, the nursing staff should continue to assess and reduce the barriers to exercise. Exercise programs should enhance self-efficacy to achieve long-term exercise behavior.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.9-16
• /
• 2020

A CFRP sheet has been applied as a structural reinforcement in the field, and various studies are conducted to evaluate the effect of CFRP sheets on reinforced concrete. Although many experiments were performed from previous studies, there are still limitations to analyze structural behaviors with various parameters in experiments directly. This study shows the FEA on structural behaviors of RC beams reinforced with CFRP sheets using ABAQUS software. To simulate debonding failure of CFRP sheets which is a major failure mode of RC beam with CFRP sheets, a cohesive element was applied between the bottom surface of RC beam and CFRP sheets. Both quasi-static method and 2-D symmetric FE model technique were performed to solve nonlinear problems. Results obtained from the FE models show good agreements with experimental results. It was found that reinforcement level of CFRP sheets is closely related to structural behavior of reinforced concrete including maximum strength, initial stiffness and deflection at failure. Also, as over-reinforcement of CFRP sheets could give rise to the brittle failure of RCstructure using CFRP sheets, an appropriate measure should be required when installing CFRP sheets in the structure.

• Journal of Korean Medicine for Obesity Research
• /
• v.21 no.1
• /
• pp.22-31
• /
• 2021

Objectives: We conducted a retrospective chart review to investigate the effects of Korean Medicine (KM) treatment on weight loss in patients with morbid obesity (body mass index [BMI]≥30 kg/m²) and to compare the effects of KM counseling and non-counseling on weight loss. Methods: We performed a retrospective chart review of patients with morbid obesity who received KM treatment for at least 1 month. We evaluated the effects of KM treatment on body weight, BMI, body fat, fat mass, EuroQol-5D, and the Korean version of the obesity-related quality of life scale (KOQOL). We also assessed the liver and kidney functions, and adverse events. We performed a comparative analysis between the counseling and non-counseling groups. Results: A total of 37 patients who underwent 4 weeks of KM treatment involving Wolbi-tang, electroacupuncture, and KM counseling were included in this study. Twenty-one patients were assigned to the counseling group and sixteen patients to the non-counseling group. There was a significant decrease in weight, BMI, fat mass, and KOQOL (P<0.05) with improvements in total cholesterol, low-density lipoprotein, and triglycerides. The counseling group had a greater reduction in body weight, BMI, body fat, and fat mass compared to the non-counseling group, although it was not significant. In the BMI below 35 (n=25), the reduction ratio of body weight, body fat mass, and body fat was higher in the counseling group than in the non-counseling group; additionally, body fat decreased significantly in counseling group (P<0.05). No severe adverse effects were observed. Conclusion: KM treatment could be effective for weight loss, especially in patients with morbid obesity, KM counseling could also be a good tool for weight loss, typically in patients with BMI<35 kg/m².