• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.251-256
• /
• 1999

대전력을 사용하는 제강공장의 L/F설비에서 발생되는 강자계를 효율적으로 차폐하기 위하여 L/F주위의 자기장 분포를 유한해석법을 이용한 사용해석도구인 ANSYS 5.3 3차원 자기장해석기를 통해 해석하고 그 결과를 평판형태의 차폐체에 적용시키고자 하였다. 분석결과, L1 및 L2가 각각 2.7 및 2.9m 이려 높이가 3.5m인 2중차폐체(1차측 차폐: 1mmt의 전기강판, 2차측차폐: 1mmt의 Fe-Ni alloy sheet)를 설치하는 거싱 최적의 처폐방안으로 도출되었다.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.356.2-356.2
• /
• 2002

The structure of 1-phenyl-2-substituted thiourea derivatives have been studied and optimized for their cytotoxic activity. The three dimensional quantitative structure activity relationship (3D-QSAR) was investigated using comparative molecular field analysis (CoMFA). The result suggested that electrostatic and steric factors of 2-alkylureido-1-phenyl propanol derivatives were correlated well with cytotoxic activity. (omitted)

• Membrane Journal
• /
• v.14 no.2
• /
• pp.85-98
• /
• 2004

The situation of technology Predominance and the distribution of core technology were visually mapped thorough the investigation of technical trend during 20 years, which was provided with the analysis of patent information for the artificial skin. Therefore, it was expected that technology mapping by means of multilateral analysis method allowed a good grasp of current technology trend of the artificial skin and the subdivision into nation and a field of research presents the direction of R&D. In the early R&D stage of artificial skin, the preparation technology of filters implantable into the living body including nursing devices, bandages, and dressings or absorbent pads (A6IF-002/10) was on the rise in research field of artificial skin until 1980's. And then the materials technology for coating prostheses (A6l L-027/00)was leading the core technology of artificial skin. Also, Nowadays the fusion technology connected the material technology with the cultivation technology of undifferentiated human or animal cells/tissues including culture media (C l2N-005/00, C 12N-005/06) was highlighted all over the world.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.3
• /
• pp.253-257
• /
• 2005

By using a coupled circuit, time-stepping, two-dimensional finite element method (2-D FEM), the performance of a stand-alone permanent-magnet synchronous generator (PMSG) with inset rotor can be computed without involving the classical two-axis model. The effects of interpolar air gap length and armature resistance on the load characteristics are investigated. It is shown that the interpolar flux density, and hence the amount of voltage compensation, is affected by magnetic saturation. Validity of the coupled circuit and field analysis is confirmed by experiments on a prototype generator. The machine exhibits an approximately level load characteristic when it is supplying an isolated unity-power-factor load.

• ETRI Journal
• /
• v.38 no.2
• /
• pp.405-415
• /
• 2016

This research proposes the use of a patent analysis methodology that can suggest promising technology in the ICT sector at the micro-level. This approach identifies core patents from the technology field, groups them as research frontiers (RFs), and develops a visualized network based on the citing relationships to monitor the relationship among RFs. In addition, it calculates a "promising index" based on the growth potential, impact, and marketability of patents to ultimately derive promising RFs. To illustrate the proposed approach, this research presents analysis results for a chosen area, which is the user interface and user experience (UI/UX) technology field. By proposing promising technological fields at the micro-level, the proposed methodology will serve as a useful decision-making support tool in selecting R&D projects, technology planning, and determining technology policy direction.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.18-20
• /
• 1995

In this paper we presented a calculation method of leakage inductance in electrical machines. For its accurate calculation the finite element method is applied to the analysis of magnetic field distribution. The self and mutual inductances are derived using the results of the magnetic field analysis and the leakage inductance is easily obtained from these inductances. As numerical examples, we tread a single phase transformer and a rotor slot model of induction motor. In the finite element analysis we used the 2D linear magnetostatic formulation with the first-order triangular element.

• The Korean Journal of Pesticide Science
• /
• v.14 no.4
• /
• pp.319-325
• /
• 2010

To understand the influences of the substituents ($R_1{\sim}R_4$) on insecticidal activity of N'-phenyl-N-methylformamidine analogues (1~22) against two spotted spider mite (Tetranychus urticae), comparative molecular field analysis (CoMFA) model and comparative molecular similarity indices analysis (CoMSIA) model as three dimensional quantitative structure-activity relationships (3D-QSARs) model were derived and discussed quantitatively. From the results, the correlativity and predictability ($r^2{_{cv.}}=0.575$ and $r^2{_{ncv.}}=0.945$) of the CoMFA 1 model were higher than those of the rest models. The the CoMFA 1 and CoMSIA 1 model with the sensitivity of the perturbation and the prediction produced ($d_q{^{2'}}/dr^2{_{yy}}=1.071{\sim}1.146$ & $q^2=0.545{\sim}0.626$) by a progressive scrambling analysis were not dependent on chance correlation. The insecticidal activities from the optimized CoMFA 1 model were depend upon the steric field (62.5%), electrostatic field (28.9%), and hydrophobic field (8.6%) of N'-phenyl-N-methylformamidine analogues. Therefore, the inhibitory activities with optimized CoMFA 1 model were dependent upon steric factor. From the contour maps of the optimized models, it is predicted that the structural distinctions that contribute to the insecticidal activity will be able to applied new potent insecticides design.

• Journal of the Korean Society of Radiology
• /
• v.10 no.2
• /
• pp.73-79
• /
• 2016

The purpose of this analysis is to compare 2D T1 FEE and 3D T1 THRIVE for demonstration of the pancreas. A total of 85(45 men, 40 women; 58 years) PACS network datum were analysis clinically indicated pancreas MRI at 1.5 T. The SNRs and CNRs of 3D T1 THRIVE(SNR: $46.42{\pm}0.67$, CNR: $28.16{\pm}0.50$) showed significantly higher values than those from 2D T1 FEE(SNR: $53.84{\pm}1.20$, CNR: $35.48{\pm}0.70$), p<0.05, The image quality of the 3D T1 THRIVE($2.63 {\pm}0.14$) was significantly superior to that with the 2D T1 FEE($2.2{\pm}0.05$), but 3D T1 THRIVE revealed several artifacts resulting in poor quality. In conclusion, The 3D T1 THRIVE technique with a 1.5 T resulting in improved SNRs, CNRs and image quality was demonstrated.

• Nuclear Engineering and Technology
• /
• v.20 no.1
• /
• pp.35-46
• /
• 1988

The prediction of clad surface temperatures is important to the design and the safety anlaysis of nuclear reactor. The accurate prediction requires the detailed knowledge of the flow structure and heat transfer, which is complicate due to anisotropic turbulent phenomena. A two-equation model including anisotropic eddy viscosity model is applied to forecast the velocity distribution. And the temperature field is calculated with uniform wall heat flux. The Galerkin's weighted residual finite element method has been used to calculate the turbulent quantities right up to the wall. The numerical results show good agreement with available data and that turbulence anisotropy strongly affects on the mean flow and thus the temperature field. And Nu-P/D correlation is established for sodium coolant in close-packed equilateral triangular bundle in the P/D range of 1.05 to 1.30.

• International Journal of Advanced Culture Technology
• /
• v.11 no.4
• /
• pp.346-351
• /
• 2023

With the rapid development of Artificial Intelligence (AI) technology, there is an increasing variety of methods for creating 3D models. These include innovations such as text-only generation, 2D images to 3D models, and combining images with cue words. Each of these methods has unique advantages, opening up new possibilities in the field of 3D modeling. The purpose of this study is to explore and summarize these methods in-depth, providing researchers and practitioners with a comprehensive perspective to understand the potential value of these methods in practical applications. Through a comprehensive analysis of pure text generation, 2D images to 3D models, and images with cue words, we will reveal the advantages and disadvantages of the various methods, as well as their applicability in different scenarios. Ultimately, this study aims to provide a useful reference for the future direction of AI modeling and to promote the innovation and progress of 3D model generation technology.