• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.768-770
• /
• 2003

A superconducting synchronous motor has different electromagnetic structure from the conventional machine. With the help of superconductor having much higher operating current density than normal conductor, superconducting motor can eliminate most of iron core filled inside of the conventional machine. This air-cored structure could be analysed and designed theoretically based on 2-dimensional(2-D) magnetic field distribution assuming that the windings are extended infinitely toward the axial direction. However, the actual structure of superconducting motor has the end regions interconnecting the straight parts of the same cross-section with the 2-D model. Therefore, this actual 3-D model has smaller field distribution than the 2-D model. In this paper, we consider the effect of the end regions on the output of a HTS model motor and suggest more accurate design approach through comparison of 2-D and 3-D magnetic field analysis results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.30-32
• /
• 1995

The model interrupters of $SF_6$ gas electromagnetic contactor whose ratings are the voltage of 7.2kV and the short circuit current of 4.0kA have been designed and manufactured on the basis of theoretical and computational analysis for its development. The eddy current analysis, the magnetic field analysis and the calculation of the rotational force on arcs have been conducted using FLUX2D package. The short circuit current interrupting tests have been conducted to the model interrupters using the simplified capacitive synthetic test circuit in KERI. The results show that the model interrupters have a sufficient interrupting capability and the new design concept is proper for a good interrupting performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.389-392
• /
• 2000

This paper presents a performance Analysis of electrically exhaust gas recirculation valve using commercial electromagnetic simulation software, Flux2D. Under the assumption of 2D axi-symmetric magnetic field, the characteristics of EEGR valve by revising the design parameter, has ken investigated by estimating the variation of thrust force with respect to the pintle position. The mode shapes and the frequency response functions were computed by using three dimensional finite element modeling of the whole EEGR valve and their accuracies were verified with experimental FFT analysis technique.

• 한국전자통신학회논문지
• /
• 제5권3호
• /
• pp.233-238
• /
• 2010

본 논문에서는 무선 망 설계에 필요한 전자파 전파 특성 예측을 위한 방법 중 하나인 광선 추적법을 이용하여 2차원 불규칙 조면에서의 전파 특성 조사하기 위한 이산 광선 추적법을 제안 하였다. 이 방법은 불규칙 조면과 광선 추적에도 이산화 방법을 적용한다. 제안한 방법은 불규칙 조면 생성에 컴퓨터 메모리를 절약할 수 있으며, 광선 추적에 소요되는 계산 시간을 단축 할 수가 있다. 2차원 불규칙 조면에 대해 이산 광선 추적법을 적용하여 전계 분포에 대한 수치 계산을 행하였으며, 이산 광선 추적법의 유효성에 대해서도 조사하였다.

• 한국정보통신학회논문지
• /
• 제17권5호
• /
• pp.1049-1054
• /
• 2013

본 논문에서는 영역분할법을 이용한 2차원 유한차분시간영역법을 제안하였다. 영역분할법은 전체 해석구조를 분할하여 해석하는 수치해석방법으로 본 논문에서는 영역분할법 중 Schur complement 방법을 적용한 유한차분 시간영역법을 구현하고 시뮬레이션 모델로 2차원 해석구조를 설정하고 사각형의 도체에 입사하는 전자파의 산란특성을 해석하였다. 2차원 해석구조를 4개의 영역과 8개의 영역으로 각각 나누어 전자파특성을 계산하였고, 제안한 해석방법의 유효함을 입증하기 위해 일반적인 전체영역에 대한 2차원 유한차분 시간영역법의 해석결과와 비교하여 잘 일치하는 것을 확인하였다.

• 한국전자파학회지:전자파기술
• /
• 제4권2호
• /
• pp.4-10
• /
• 1993

이동통신에서, 전파경로는 이동국의 위치변동때문에 시간 및 공간에 따라 변한다. 전파경로 손실은 주 파수와 거리뿐만 아니라 안테나 높이, 지형구조와 인위적 환경에 따라 탄라지브로 이동 전파신호의 전파 경로손실을 예측하기는 매우 어렵다. 본 고에서는 대전 및 서울 지역에서 전계강도를 측정하여 단구간 중앙치,500m 거리별 평균치 및 표준 편차를 산출하여 분석하였다. 분석 결과, 경로손실 특성이 예측모텔과 유사하였으며, 특히 단구간 중앙치 는 기지국 안테나 높이, 지형구조와 인위적 환경에 의존하며, 표준편차는 2-1OdBuV사이에 있음을 알 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.25-27
• /
• 2005

This paper deals with the comparison and analysis of brushless DC (BLDC) motor with radial and polar anisotropic plastic magnet. The open-circuit field distributions and back-emf for BLDC motor with polar plastic magnet are established analytically and the results are validated extensively by comparison with finite element (FE) analyses. On the basis of two dimensional (2-D) analytical solutions, this paper predicts open-circuit field characteristics according to design parameters and makes a comparison between BLDC motor with polar plastic magnet and it with radial plastic magnet in terms of required magnet volume and harmonic of air-gap flux density waveform.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.415-417
• /
• 2003

we analyzed the electromagnetic behavior of a superconducting fault current limiter (SFCL) under the quench state using FEM. The analysis model used in this work is 5.5 KVA meander-line type SFCLs. Meshes of 3,650 triangular elements were used in the analysis of this SFCL. Analysis results showed that the distribution of current density was concentrated to inner curved line in meander-line type-SFCL and the maximum current density was 14.61 $A/m^2$ and also the maximum Joule heat was 2,030 $W/m^2$ in this region. We think that the new and the modified structure must be considered for an uniform distribution of the electromagnetic field.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.744-750
• /
• 2019

A new type of auto-rotary PM mechanical flux-varying PM machine (ARPMMFVPMM) is proposed in this paper, which can overcome the problem where the air-gap magnetic field of a PM machine is difficult to freely adjust. The topology structures of the machine and the mechanical flux-adjusting device are given. In addition, the operation principle of flux-adjusting is analyzed in detail. Furthermore, the deformation of a spring with the speed variation is obtained by virtual prototype technology. Electromagnetic characteristics including the flux distribution, air gap flux density, flux linkage, electromagnetic-magnetic-force (EMF), and flux weakening ability are computed by 2D finite element method (FEM). Results show that the machine has some advantages such as the good field control ability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.637-638
• /
• 2006

Different from the conventional motor, the superconducting motor has so large air-gap that the actual parameters such as excitation voltage have considerable difference from the values obtained from 2-dimensional electromagnetic analysis. This paper introduces 3-dimensional EMCH(Equivalent Magnetic Circuit Network) method or FLUX-3D FEM(Finite Element Method) software to reduce the error originated from the 2-dimensional electromagnetic analysis for the development of a 1 MW class high-temperature superconducting motor.