• Title/Summary/Keyword: 2-인산암모늄

Search Result 69, Processing Time 0.021 seconds

Fire Retardant Treatment to the Plywood with Di-ammonium Phosphate [(NH4)2HPO4] (II) - Effect of Platen Temperature on Bending Strength of Treated Plywoods - (제2인산(第二燐酸) 암모늄에 의(依)한 합판(合板)의 내화처리(耐火處理)(II) - 열판온도(熱板溫度)가 처리합판(處理合板)의 곡강도(曲强度)에 미치는 영향(影響) -)

  • Chung, Woo-Yang;Lee, Phil-Woo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.12 no.2
    • /
    • pp.3-9
    • /
    • 1984
  • This study was carried out to examine the practicality of DAP[$(NH_4)_2HPO_4$] as fire retardant for plywood by static bending test the redried plywoods which had been soaked in 20% $(NH_4)_2HPO_4$ solution. Being hot/cold soaked in the solution for 3/3, 6/3, 9/3 and 12/3 hours and redried by cyclic press-drying method at the platen temp. of 130, 145, 100 and $175^{\circ}C$, the treated plywoods were tested to offer the mechanical data, that is, $S_{pl}$(stress at proportional limit), MOE(modulus of elasticity), MOR(modulus of rupture) and $W_{pl}$(work per unit volume to proportional limit ) in flexure. The results obtained were summarized as follows. 1. $S_{pl}$ of fire retardant treated plywoods ("FRP" would be used hereinafter) decreased as the platen temperature increased, but it was superior to that of non-treated plywoods(Control) at $160^{\circ}C$ or higher. 2. MOE of FRP decreased roughly with the increase of temperature, hut this tendency was not constant. And the value of FRP was higher than that of Control even at $175^{\circ}C$. 3. MOR of FRP showed same temperature-dependent tendency as MOE, but it was influenced more sensitively at the higher temperature. 4. $W_{pl}$ of FRP also decreased gradually with the increase of platen temperature and the value in DAP 9/3 treatment was Jess than 70% of control plywoods. 5. In view of redrying time and mechanical properties, the most reasonable platen temperature for DAP treated FRP was $160^{\circ}C$ in this study.

  • PDF

Atom-efficient Preparation of 9, 9'-Bis[4-(2'-hydroxy-3'-acryloyloxypropoxy)phenyl]fluorene (9, 9'-비스[4-(2'-하이드록시-3'-아크릴로일옥시프로폭시) 페닐]플루오렌의 원자효율적 합성)

  • Jung, Hyeok-Jin;Hong, Seong-Jae;Seo, Kwang-Beom;Shim, Jae-Jin;Ra, Choon-Sup
    • Clean Technology
    • /
    • v.17 no.4
    • /
    • pp.325-328
    • /
    • 2011
  • Atom-efficient preparation of 9, 9'-bis[4-(2'-hydroxy-3'-acryloyloxypropoxy) phenyl]fluorene (3), the extensively used building block for fluorene-containing acrylic epoxy polymers has been described. The epoxide ring opening esterification of 9, 9-bis[4-(glycidyloxy)phenyl]fluorene (1) with acrylic acid was catalyzed by some onium salts such as quaternary ammonium and phosphonium salts. While the coupling reactions depend greatly on the kind of the onium salts, the reaction of 9, 9-bis[4-(glycidyloxy)phenyl]fluorene (1) with acrylic acid proceed most efficiently in the presence of a catalytic amount of tetrabutylphosphonium bromide at $110^{\circ}C$ with 90% yield. This reaction is a cleaner reaction that minimizes the use of reactants and the production of chemical wastes.

Synthesis of a Fluorene Carbonate from Fluorenyl Epoxide Using Supercritical Carbon Dioxde (초임계이산화탄소를 이용한 플로레닐계 에폭사이드로부터 카보네이트 화합물의 합성)

  • Sim, Yun-Soo;Shim, Jae-Jin;Ra, Choon-Sup
    • Clean Technology
    • /
    • v.16 no.4
    • /
    • pp.239-244
    • /
    • 2010
  • The carboxylation of the fluorenyl epoxide with a spiro framework, 9,9'-Bis(4-oxiranylmethoxyphenyl) fluorine (2) was catalyzed by some onium salts such as quaternary ammonium and phosphonium salts to produce the corresponding five-membered cyclic carbonate (3) in an efficient and environmentally benign fashion. The coupling reactions depend greatly on the kind of the halide anions and alkyl chain length of the onium salts. While the reaction was sensitive to the reaction temperature, the reaction trends suggest that the catalytic efficiency of the quaternary ammonium halides may correlate strongly with the melting points of the halides. The reactions using a catalytic amount (2 mol %) of quaternary ammonium bromide with an n-butyl chain at 75.9 bar of $CO_2$ and 393 K give the highest yield of the cyclic carbonate (92%).

Ecological Characteristics of Sphagnum Fens in Mt. Odae : 2. Conservation Area of Jilmoe-neup (오대산 물이끼 이탄습지의 생태적 특성: II. 질뫼늪 보호구역)

  • Park, Ji-Hyun;Kim, Jae-Geun
    • Journal of Wetlands Research
    • /
    • v.14 no.1
    • /
    • pp.101-120
    • /
    • 2012
  • We investigated the ecological characteristics of Jilmoe-neup conservation area which is one of wetlands designated as a Ramsar convention site in Mt. Odae from 2007 to 2011. Average out-flow of water was 0.80 $m^3/min$ during observation period. Average pH of water was 6.1, electric conductivity was 19 ${\mu}S/cm$ and contents of potassium, calcium and ammonium, nitrate and available phosphorus in water were recorded below average 2.0 mg/L. Peat layer was less developed than in other montane wetlands such as Yong-neup and Wangdeungjae-neup. Plants were recorded as 49 family, 118 genus, 163 species, 3 subspecies, 29 variety and 6 forma, total 163 taxa. Trientalis europaea L., which was designated in endangered level 2 by Ministry of Environment, inhabited at Sphagnum dominated area and Carex tussocks. Vegetation analysis showed that dominance value was changed as species distribution area were increased or decreased periodically. Although Jilmoe-neup deserved conservation value for Sphagnum fen which has diverse flora, it was affected from various factors such as ranch in the vicinity. Therefore, it must be monitored and managed continuously.

Continuous Automated Determination of Urea Using a New Enzyme Reactor (새로운 효소반응기를 이용한 요소의 연속·자동화 정량)

  • Heung Lark Lee;Seung Tae Yang
    • Journal of the Korean Chemical Society
    • /
    • v.36 no.3
    • /
    • pp.393-404
    • /
    • 1992
  • The response properties of continuous automated system using an enzyme reactor for determination of urea were investigated. The enzyme reactor was constructed to packed-bed form which filled with nylon-6 beads (42∼48 mesh), which immobilized urease with glutaraldehyde, in teflon tube (2 mm I.D., 20 cm length). The system was composed of the enzyme reactor, gas dialyzer, and tublar PVC-nonactin membrane ammonium ion-selective electrode as an indicator electrode in serial order. The response characteristics of this system were as follows. That is, the concentration range of linear response, slope of linear response, detection limit, and conversion percentage were $5.5{\times}10^{-6}$$2.4{\times}10^{-3}M$, 57.8 mV/decade, $1.5{\times}10^{-6}$, and 80.8%, respectively. The optimum buffer and life time of urease reactor were 0.01M Tris-HCl buffer solution (pH 7.0∼7.8) and 0.01M phosphate buffer solution (pH 6.9∼7.5) and about 150 days, respectively. And the urease reactor had no interferences of the other physiological materials.

  • PDF

A Study on Synthesis Acrylic Polymer Resin and Mechanical Properties Containing Monoammonium Phosphate (Monoammonium phosphate를 포함한 아크릴 수지의 합성 및 물성에 관한 연구)

  • Lee, Joo-Youb;Kim, Ki-Jun
    • Journal of the Korean Applied Science and Technology
    • /
    • v.31 no.3
    • /
    • pp.500-508
    • /
    • 2014
  • For this research, synthesis acrylic resin by ethyl acrylate monomer(EAM) and prepared samples which set by difference amount of monoammonium phosphate solution in waterborne acrylic resin. Use these resins, analyzed mechanical properties and thermal stability by films and leather surface coated. The test of DSC experiment sample WAC-APS3 was $410^{\circ}C$ Tm values which means the highest content of monoammonium phosphate had highest thermal stability in acrylic resin. According to measure data for solvent resistance, all samples showed good property. As known in the results, increase of ammonium phosphate constant did not influence to big change of resin properties. In abrasion test WAC-APS3 was good abrasion properties(68.729 mg.loss). Test of tensile strength, as increase as monoammonium phosphate resin analyzed low properties $1.505kgf/mm^2$ to $1.275kgf/mm^2$. In elongation case, same as strength test result 425 % to 384 % by increase to monoammonium phosphate amount in acrylic resin.

Change in Taxonomic Composition of Phytoplankton and Environmental Factors after Construction of Dike in Yeongsan River Estuary (하구언 건설 전.후의 영산강 하구 식물플랑크톤 군집 및 환경 변화)

  • Shin, Yong-Sik;Yoon, Bo-Bae
    • Korean Journal of Environmental Biology
    • /
    • v.29 no.3
    • /
    • pp.212-224
    • /
    • 2011
  • The Yeongsan River estuary, located in the south west coast, was a typical estuary before a dike was constructed in December 1981. After the construction, the water quality and plankton communities are expected to change. We investigated the change of phytoplankton community and environmental properties in the Yeongsan River estuary by comparing the data collected recently with the results reported before and/or shortly after the construction. Concentrations of $NH_4$-N were significantly increased in the freshwater zone. Concentrations of DO at the surface, $NO_2+NO_3$ and $NH_4$-N were increased while the concentrations of $PO_4$ at the surface were decreased in the seawater zone. The number of green algae species was decreased in the freshwater zone. The number of diatom species was decreased while the numbers of green algae and dinoflagellates were increased in the seawater zone. This study can provide information for better management of the Yeongsan River estuary since no comparison study has been documented between the phytoplankton community before and after the construction of the dike in the estuary.

Manufacturing of Wine with Watermelon (수박을 이용한 발효주의 제조)

  • Hwang, Young;Lee, Ki-Kwon;Jung, Gi-Tai;Ko, Bok-Rae;Choi, Dong-Chil;Choi, Yeong-Geun;Eun, Jong-Bang
    • Korean Journal of Food Science and Technology
    • /
    • v.36 no.1
    • /
    • pp.50-57
    • /
    • 2004
  • Selection of yeast strains, optimum conditions for alcohol fermentation, sterilization methods, and additives for improving wine quality were investigated to manufacture watermelon wine. Eight yeast strains exhibited significant alcohol fermentation, among which KWS 06 was selected for watermelon wine fermentation, because watermelon wine made by this strain showed the best overall acceptability in sensory evaluation. Sucrose was determined as the best saccharide for alcohol fermentation among sucrose, corn syrup, glucose, fructose, and lactose. Optimum concentration of soluble solid and $(NH_{4})_{2}HPO_{4}$ of nitrogen source were $24^{\circ}Brix and 0.2%, respectively. Addition of raspberries and omija increased wine flavor and alcohol production, respectively, with optimum alcohol production, taste, and color achieved with addition of 20 g/L raspberries and 10 g/L omija. Best sensory quality was obtained by addition of 0.04 % watermelon flavorant to the juice.

Cloning and Expression of Escherichia coli Ornithine Transcarbamylase Gene, argI (Escherichia coli 오르니틴 트란스카바밀라제의 유전자 argI의 클로닝 및 발현)

  • Riu, Key-Zung;U, Zang-Kual;Ko, Young-Hwan;Kim, Chan-Shik;Song, Sung-Jun;Oh, Young-Seon;Lee, Sun-Joo
    • Applied Biological Chemistry
    • /
    • v.38 no.2
    • /
    • pp.118-122
    • /
    • 1995
  • Escherichia Coli ornithine transcarbamylase is the enzyme which catalyzes the L-citrulline biosynthesis from L-ornithine and carbamyl phosphate. To facilitate the purification of enzyme which will be used for many biochemical studies such as structure and function relationships and catalytic mechanisms, the cloning and expression of E. coli argI gene for ornithine transcarbamylase was conducted. argI was amplified from genomic DNA of E. coli strain of $DH5{\alpha}$, by polymerization chain reaction (PCR) method. The amplified argI gene was ligated to the prokaryotic expression vector pKK223-3 and used for transformation of E. coli TB2 which was deficient of ornithine transcarbamylase. The over-produced enzyme by the tnansformant was purified by ammonium sulfate fractionation, heat denaturation and affinity chromatography. The result of SDS denaturation gel electrophoresis for the purified enzyme showed a single band of about 38 kDa of ornithine transcarbamylase. Kinetic data for the expressed enzyme gave almost the s?????? values as those of the wild type enzyme. The $k_{cat}$, of the enzyme was $1.0{\times}10^5min^{-1}$, and $K_ms$ for ornithine and carbamyl phosphate were 0.35 mM and 0.06 mM, respectively.

  • PDF

Fire Retardant Treatment to the Plywood with Di-ammonium Phosphate [(NH4)2 HPO4](I) -Hot and Cold Soaking Treatment and Redrying of Treated Plywood by Hot Platen- (제2인산(第二燐酸) 암모늄에 의한 합판(合板)의 내화처리(耐火處理)(I) -온냉침지처리(温冷浸漬處理)와 열판(熱板)에 의한 처리합판(處理合板)의 재건조(再乾燥) -)

  • Lee, Phil Woo;Chung, Woo Yang
    • Journal of Korean Society of Forest Science
    • /
    • v.60 no.1
    • /
    • pp.30-36
    • /
    • 1983
  • Plywood, the representative interior decorative or structural material, is so inflammable that it may cause big fires. Therefore, it is required inevitably to manufacture the "Fire retardant treated plywood", and it will be a study on the redrying of treated plywood that we ought to solve. This study was carried out to investigate the absorption of 20% $(NH_4)_2HPO_4$ solution into the soaked plywoods by hot/cold soaking for 3/3, 6/3, 9/3 and 12/3 hours and to study drying process with drying curves and drying rates by press-drying at the platen temperature of 130, 145, 160 and $175^{\circ}C$. Solution absorption of plywoods in hot/cold soaking method increased steadily with the prolonged soaking time, and water absorption is higher than DAP absorption, and then chemical retention (DAP) exceeded the minimum retention [$1.125kg/(30cm)^3$] even in the shortest soaking treatment. Drying curves of water-soaked plywoods inclined more steeply than those of DAP soaked plywoods. And the drying proceeded rapidly with the increase in platen temperature and terminated in 2.5-4 minutes at the temperature of 160 and $170^{\circ}C$. Drying rate also increased generally with the increase of platen temperature. So it was at $175^{\circ}C$ in DAP-soaking and at $160^{\circ}C$ in water-soaking when the drying rate became above 10%/min.

  • PDF