• The Research Journal of the Costume Culture
• /
• v.22 no.2
• /
• pp.209-224
• /
• 2014

This study aims to compare the ease of shirt patterns in the men's wear market that have been constantly developing, and to analyze the fitness and appearance through the 3D virtual try-on system. The study selected three industrial patterns and two educational materials of classic-fit and slim-fit shirts for a total of ten items. The experiments involved virtual wearing, a stress contact point perspective map, and appearance evaluations. First, the ease differed significantly in the chest, waist, and sleeve cap height according to the patterns. Second, based on the stress, contact point, and transparency, there was ease in the order of Nam, D-brand, J-brand, Park, and S-brand in the classic-fit shirts while the order of D-brand, Nam, J-brand, Park, and S-brand resulted in the slim-fit shirts. Third, in the appearance evaluation, higher points resulted in the order of J-brand, Park, S-brand, D-brand, and Nam in both classic-fit and slim-fit. The results showed that proper ease differs greatly by shirt-fit and target age. Also, the shirts with more ease tended to be evaluated less favorably in the appearance evaluation. Based on the results, the study suggests that the proper ease in chest circumference is 18cm for the classic-fit shirts and 6 cm for the slim-fit shirts.

• Journal of Fisheries and Marine Sciences Education
• /
• v.5 no.2
• /
• pp.98-109
• /
• 1993

By the Article 28 of the Korean Fishing Vessels Act and the Article 47-1 of the Enforcement Ordinance of the Act, fishing vessels over 5 gross tone must be insured the fishing vessels mutual insurance or marine insurance. Therefore the distant-water fishing vessels and vessels registered with Classification Society can be insured to the marine insurance, and non-registered vessels and the small fishing vessels can be insured to the fishing vessels mutual insurance of Fisheries Co-operatives. Moreover, the shipowners of fishing vessels over 5 gross tons to be insured a liability insurance for their crew, and it is to compensate effectively the crewman's accidents prescribed in the Seaman's Act. The shipowner's Liability Insurance to be insured the seaman's Compensation Insurance or the seaman's mutual insurance of the Fisheries Co-operatives and the Protection and Indemnity but they still involve lots of problems to cover the crewman's accidents reasonably. The author's views on the improvement way of the fisheries mutual insurance system are as follows. 1. The size of fishing vessels over 5 gross tons prescribed by the Article 28 of the Fishing Vessels Act must be revised into over 1 gross tons. And the regulations concerning penalties against nonfulfilment of the regulation must be strengthened in order to have legal effectiveness. 2. The level of the government subsidy for the fisheries mutual insurance must be raised up from the large point of view for protection of fishermen. It is concluded that the Government have to take charge of the remutual insurance in order to develop the fisheries mutual insurance system. 3. The mutual insurance system of fish catch have to be executed in order to guarantee the stable income for fishermen on the base of the amount of money by fish catch in the previous year.

• International journal of advanced smart convergence
• /
• v.10 no.1
• /
• pp.117-124
• /
• 2021

Based on a result of we research and analysis of this study, it was analyzed that the average annual cremators number using E-Haneul Funeral Information System among the five public cremation facilities in Jeollabukdo was 9,713 in total before the opening of public creation facilities in Jeongeup City (2013-2015), while the number was 12,159 after the opening of public cremation facilities in Jeongeup City (2016-2019); the number was increased by 2,446, compared to the opening period (2013-2015), with a large increase rate of 25.2%. In addition, the average annual cremation rate before the opening of public cremation facilities in Jeongeup City (from 2013 to 2015) was 71.6%, but the average annual cremation rate during the period after the opening (from 2016 to 2019) was 81.5%, which was a large increase rate of 9.9% compared to period before the opening of the facilities. Based on research results above, we have presented policy suggestions in order to increase the efficiency of operation and management of public cremation facilities by local governments as follows. First, in order to prepare for the increase in demand for cremation due to the increase in cremators number, a policy promotion for the expansion of "public cremation facilities" should be carried out as soon as possible, focusing on local governments whose supply has reached the limit. Second, in order to support the expansion and construction of public cremation facilities, the government subsidy rate and government subsidy at the level of current 70%, provided by the central government, should be further expanded. Third, overcoming theNIMBY conflict overlocation for public cremation facilities, theutilization rate should be enhanced, through the joint construction and facility operation of the public cremation facilities between local governments, and the ef iciency of the project implementation should be improved through the jointsharing of the facility operation cost.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.2
• /
• pp.93-101
• /
• 2022

It is essential to prevent LoC(Loss-of-Control) or upset situations caused by stall, icing or sensor malfunction in aircraft, because it may lead to the crash of the aircraft. With this regard, it is crucial to correctly identify the dynamic characteristics of aircraft in such upset conditions. In this paper, we present a SID(System IDentification) method utilizing the moving-window based least-square and the adaptive-order ZKF(Zonotopic Kalman Filter), which is more effective than the existing Kalman-filter based SID for the aircraft in upset condition at a high angle of attack with temporary sensor malfunction. The proposed method is then tested on real flight data and compared with the existing one.

• Journal of the Korean Ceramic Society
• /
• v.30 no.8
• /
• pp.615-622
• /
• 1993

In order to increase chemical durability of thin films in binary system B2O3-SiO2 and Al2O3-SiO2 on the slide glass by the dip-coating technique from TEOS(Tetraethyl Orthosilicate) and boric acid or aluminum nitrate, phosphoric acid(5~20mol%) was added, respectively. Corrosion of acid and alkali of samples treated with 1N, HCl, NaOH and distilled water at 10$0^{\circ}C$ for 15 minute, were measured IR transmittance and variance of transmittance at visible range. Surface structure of thin film was investigated with SEM and formation of crystal phase according to additiion of phosphoric acid was measrued with XRD. In Al2O3-SiO2 system, change of remarkable characteristic was not obtained at the addition of P2O5 but transmittance of thin film was decreased with addition of P2O5 in B2O3-SiO2 system.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.2
• /
• pp.139-152
• /
• 2008

In order to survive worldwide competition, today's industries are experiencing strong pressure to introduce higher quality products with lower cost and shorter lead-time. Therefore, the role of design in the process of product development is increasing in significance. In this research, two methods for improving the design capability are proposed: construction of design environment and design automation using 3D CAD system. The designers and design process are the core of product design using 3D CAD system. In order to maximize the design performance, construction of the design environment including selection of a suitable system, designer training for best use of the system, establishment of an efficient design process, and stabilization of the environment are required. A method is suggested to construct design environment by systematizing the contents of the projects and consulting experiences carried out for various categories of business such as electronic devices, motorcycles, electricity parts, sanitary wares, injection molds, and die casing molds. Design automation helps reduce tedious and time-consuming jobs, simplify complicated and error-prone modeling and drawing works to shorten the lead time and improve the product quality. To develop a design automation system, understanding the process and the related knowledge on design are very important before implementing the system using API provided by 3D CAD system. In this research, an eight-step procedure is proposed for the development of a design automation system. These eight steps are analysis of needs, determination of specification, verification of specification using 3D CAD system, inspection of related API functions, programming, field test, application in practice, and maintenance. A case study in which five design automation systems in the design of turbine generators using the proposed method is introduced in detail. These systems play important roles in the generation of various output items including 3D models, drafts, material information, and NC data. The case study shows how effectively the design time is reduced and the quality improved using those systems.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.173-180
• /
• 2020

In Korea, due to the rapid increase in population due to industrialization, rivers were developed and managed with a focus on the completion and dimension of rivers. Due to the rapid increase in river use, there are so many river facilities indiscriminately that the administrative and management tasks are complicated and diversified in computerizing facilities and hydrologic data. Many methods have been proposed to solve this problem, but many problems exist. Among them, water has the same spectral characteristics, so it is difficult to subdivide into rivers, reservoirs, and dams. Therefore, this study subdivided the water system using supervised classification and GIS in order to efficiently manage the water resources by classifying the water system with the same spectral characteristics. In order to analyze the accuracy of the results, the accuracy of the objects classified using land cover map provided by environmental spatial information service was evaluated, and the result was an average of 91.75%, with 97.50% of rivers, 87.76% of reservoirs, and 90.00% of others.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.479-481
• /
• 1999

In this paper, We design low-order controller to achieve maximized controller stability margin and controller' Performance. FOPA(Fixed Order Pole Assignment) method is one of the approach to design controller in the parametric uncertain system. But the method to define a Target Polynomial is not explicit1y Known. In this paper, our goal is to find a controller Coefficient, such that performance and $l_2$ stability margin are maximized in the parametric uncertain system. Using Lipatove theorem and CDM(Coefficient Diagram Method), we set target polynomial constraints and design a controller which maximizes $l_2$ stability margin. we show effectiveness of the proposed controller design method by comparing $l_2$ stability many of the desired controller with that of the conventional robust controller.

• Journal of Environmental Health Sciences
• /
• v.40 no.2
• /
• pp.71-80
• /
• 2014

Objectives: The main purpose of this review is to introduce the current status of environmental health indicators of Korea and to share our experience of the developmental process of Korean version of environmental health indicators. Methods: This paper describes 1) the background of environmental health indicators; 2) the ways how we developed environmental health indicators of Korea; 3) the current status of selected indicators; and 4) suggestions for the further policy development. Results: The 6-year long project for the development of environmental health indicator systems in Korea could provide outputs on three major distinct aspects on the indicator issues. Firstly, we have developed the rational process/manual so that the government can select and advocate the potential indicators with a relatively objective manner. Secondly, we have suggested the potential candidate indicators which can be implemented immediately. We also pooled all indicators in order to evaluate the summary index which we expect to tell the status of environmental health. Third, we provided suggestions on the further utilization of this indicator system. Conclusion: The mission of environmental health policy is to resolve the public health problems occurring because of hazardous environment. In order to identify the environmental determinants of the community health problems and to evaluate the effectiveness of the policy implemented, these environmental indicators can be used. Therefore, the government should implement this ready-prepared system of environmental health indicators.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.2
• /
• pp.356-365
• /
• 1995

study was made to investigate the emulsification and rolling-up between liquid oily soils and surfactant and its effect on the detergency. Samples used were triolein as a triglyceride, oleic acid as a free fatty acid and sodium dodecyl sUJfate(SDS) as a surfactant. The results were as follows: 1. The spontaneous emulsification occurred in the system of oleic acid alone and mixture of triolein and oleic acid contacted with 0.5% SDS solution, but it did not occurred in a case of triolein alone. 2. The stability of emulsification increased with the increase of SDS concentration. And the stability of emulsification and (-) t value increased in the order of triolein < mixture of triolein and oleic and< oleic acid. 3. The rolling-up mechanism of model oily soils easily occurred in the order of triolein< mixture of triolein and oleic acid< oleic acid, and facilitated with the increase of SDS concentration. On the other hand, the complex formation was already observed in the system of oleic and 0.5% SDS solution. 4. As compared with the detergency of triolein, the detergency of oleic acid was very high. And the detergency of mixed soil was improved with increasing ratio of oleic acid in the mixture.