• The Journal of Engineering Geology
• /
• v.9 no.1
• /
• pp.31-43
• /
• 1999

This study aims to quantify the distribution characteristics of the fracture system for the numerical modeling of groundwater flow in the north-eastern area of Yosu peninsula. The study area is composed mainly of volcanic rocks and granite. The regional and site scale lineament in the range of magnitude Order 1 to Order 3 were analyzed from the geologic map, air-photograph and shaded relief map. The geometric parameter of Order 4 fracture system was acquired from the scanline survey on the ground surface. There is a similar trend in the preferred orientation between the regional lineament and the Order 4 fracture system except the Set 4 of Order 4 fracture system which is not prominent in the type. That is classified to three fracture sat of high dip angle and one of ow dip angle. From the lineament trend. The orientation of Order 4 fracture system has similar characteristics in each rock termination mode analysis, it is considered that the fracture system was developed systematically and sequentially from Set 1 to Set 4 Filling materials are distinct relatively in low dip angle set. The fracture spacing follows to lognoral distribution and the fracture frequency corrected by the modified Terzaghi correction ranges from 0.38 to 1.01 per mater in each fracture set. The fracture trace lenght also follows to lognormal distribution and ranges from 2.9m to 3.7m in each fracture set.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.2
• /
• pp.145-151
• /
• 2015

As order quantity is increased, the ordering cost per item will be cheaper due to saving of transportation and material handling costs. In this paper, two realistic assumptions such as quantity discount and budget limit are considered. Quantity discount means that all units in the order will be discounted according to the predetermined order levels. Budget limit represents that the costs for inventory investments are bounded. This paper develops a Lagrangian relaxation approach for a continuous review inventory model with a budget constraint and quantity discounts. Computational results indicate that the proposed approach provides a good solution. Sensitivity analysis is done to get some insights on budget limit and quantity discount. As budget limit or the amount of discount according to order quantity is increased, order quantity is increased, whereas reorder point is not always increased.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1831-1836
• /
• 2016

Phase noise spectrum distributions of signal generators for next-generation VSAT satellite system based on DVB-RCS2 were analyzed in this paper. The forward link of VSAT system utilizes the APSK higher-order modulation methods based on the DVB-S2 ACM, the modulation methods of the return link utilizes the higher-order PSK and QAM based on the DVB-RCS2. In digital satellite system using the higher-order modulation techniques, the phase noise have an effect on transmission performance, the transmission performance is dominantly degraded by the phase noise of signal generators in the transmission system. The phase noise spectrum distribution of signal generators are analyzed by considering the ACM conditions that adopts the modulation techniques and data rates due to satellite transmission environment. The proper phase noise spectrum distribution for next-generation VSAT system based on DVB-RCS2 are proposed from the analyzed phase noise spectrum characteristics.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.2
• /
• pp.97-102
• /
• 1993

Hospital pharmacy services are divided into dispensing affairs for inpatients and outpatients, pharmaceutical service, stock control, intravenous admixture service, drug information service, pharmacokinetic consultation service, education and research work, etc. But among those affairs, dispensing affair for outpatient is perceived as the most important work in Korea, because it is linked directly with hospital service for patients. Therefore, total computer system for dispensing area was adopted from opening point of hospital in 1989 in Asan Medical Center. Utilization of computer system for outpatient dispensing area is as follows; 1) Order communication system of prescription by Total Hospital Information System, 2) Automatic print-out system of direction for use by sticker connected with on-line net work, 3) Use of automatic tablet counting and packaging machines connected with on-line net work. Those computer system resulted in curtailment of pharmacy manpower and shortening of waiting-time for outpatient.

• Journal of Mechanical Science and Technology
• /
• v.19 no.2
• /
• pp.618-624
• /
• 2005

We present a new state-space approach to construct a dynamic output feedback controller which stabilizes a class of linear time invariant systems. All the states of the given system are not measurable and only the output is used to design the stabilizing control law. In the design scheme, however, we first assume that the given system can be stabilized by a feedback law composed of the output and its derivatives of a certain order. Beginning with this assumption, we systematically construct a dynamic system which removes the need of the derivatives. The main advantage of the proposed controller is regarding the controller order, which may be smaller than that of conventional output feedback controller. Using a simple numerical example, it is shown that the order of the proposed controller is indeed smaller than that of reduced-order observer based output feedback controller.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.2
• /
• pp.122-128
• /
• 2021

Despite various economic crises, the domestic parcel delivery market handled 3.37 billion parcels in 2020 while maintaining annual growth due to the activation of e-commerce. In particular, in the case of the metropolitan area, which accounts for about 70% of the nation's parcel throughput, the increase in parcel delivery volume is directly related to the increase in freight vehicles in central area of Seoul,. And it leads to an increase of unnecessary social and environmental costs such as traffic congestion, road damage, and environmental pollution in the city. Therefore, in this paper we proposed the underground urban logistics system utilizing the existing urban rail infrastructure, and establish a conceptual design by operational scenario. In order to establish conceptual design of underground urban logistics system, we use order picking system process, which is use in warehouse, produce result combined ISO/IEC 26702. The results of this study can be usefully used before the underground urban logistics system is introduced.

• Journal of the Korean Mathematical Society
• /
• v.55 no.2
• /
• pp.471-506
• /
• 2018

In this article, some projection methods (or fractional-step methods) are proposed and analyzed for the micropolar Navier-Stokes equations (MNSE). These methods allow us to decouple the MNSE system into two sub-problems at each timestep, one is the linear and angular velocities system, the other is the pressure system. Both first-order and second-order projection methods are considered. For the classical first-order projection scheme, the stability and error estimates for the linear and angular velocities and the pressure are established rigorously. In addition, a modified first-order projection scheme which leads to some improved error estimates is also proposed and analyzed. We also present the second-order projection method which is unconditionally stable. Ample numerical experiments are performed to confirm the theoretical predictions and demonstrate the efficiency of the methods.

• Korean Journal of Remote Sensing
• /
• v.3 no.2
• /
• pp.103-113
• /
• 1987

The two key elements of the Geographic Information System(GIS) are (1) Data base management of land resources information as computer files, and (2) Software ability to analyze and map this information. More geometrically corrected SPOT derived land cover information and digital topographic infornation from digitial elevation model (DEM) were integrated as input data of GIS in order to create landscape modelling. The ultimate goal of this GIS is to establish the use of physiographic data as an intergral part of the comprehensive planning process in order to avoid significant environmental and economic problems.

• Journal of Digital Convergence
• /
• v.5 no.2
• /
• pp.99-108
• /
• 2007

As the transaction using mail order sales mediating sites such as Auction rapidly increase, consumer damages are also increasing. Therefore, in this study, the methods to remedy consumer damages occurring from transactions through mail order sales mediating sites such as the Payment Deposit System, the systems to resolve disputes without any litigation and the systems in relation to the Consumer Basic Act have been examined and measures to improve the systems have been groped. For the transactions using mail order sales intermediating sites, it is necessary to impose more responsibility on mail order sales mediators although the responsibility may not be required to be at the level of mail order sellers such as internet shopping malls. Therefore, institutional supports are necessary to effectively protect consumers in the transactions using mail order sales mediating sites and to induce damaged consumers to actively file claims for compensations. In relation to this, the Collective Dispute Mediation System and the Consumer Group Litigation System under the Consumer Basic Act may become good examples. The consumers who have been subject to the same or similar damages in the transactions using mail order sales mediating sites should also be allowed to participate in the Collective Dispute Mediation under the Consumer Basic Act or actively utilize the Consumer Group Litigation System. Also, it is desirable to reflect these systems on 'the Act on Consumer Protection in E-Commerce etc' so that these systems can also be directly applied to the transactions using mail order sales mediating sites.

• Progress in Superconductivity
• /
• v.8 no.2
• /
• pp.152-157
• /
• 2007

Uniaxial square Helmholtz coils for testing SQUID sensors were designed and their field distributions were calculated. Optimum parameters for maximizing the uniform region in the Helmholtz mode were obtained for different uniformity tolerances. The coil system consists of 2 pairs of identical square loops, a Helmholtz pair for generating uniform fields and the other for the 2nd-order gradient fields in combination with the Helmholtz pair. Full expressions of the axial component of the field were calculated by using Biot-Savart's law. To understand the behavior of the field near the coil center, analytical expressions were obtained up to the 4th-order in the midplane and along the coil axis. The Helmholtz condition for generating uniform fields was calculated to be $d/{\alpha}=0.544505643$, where 2d is the inter-coil distance and $2{\alpha}$ is the side length of the coil square. Maximized uniform range can be obtained for a given nonuniformity tolerance by choosing $d/{\alpha}$ slightly lower than the Helmholtz condition. The pure second-order gradient field can be generated by subtracting the Helmholtz field from the field of the 2nd pair with equal magnitudes of the center fields of the two pairs. The coil system is useful for testing balance and sensitivity of SQUID gradiometers.