• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.2
• /
• pp.45-52
• /
• 2011

This study is to develop a Priority Decision System for Redevelopment (PDSR) which is able to decide the priority for redevelopment of agricultural reservoirs. The major scopes of this research are to make the related GIS data like hydrologic unit map and other thematic maps to determine the suggested priority index (PI), and to develop the PDSR handling the GIS data and calculating weighing factors for the PI. In order to make the weighing factor decision module, the AHP technique was adopted. The result of the weighing factor calculation was showed PC (Possibility Criteria) and RC (Restriction Criteria) were 76% and 24% respectively. Which means that most of the specialist selected PC category prior to RC because of whom to mostly of major technique. So, in order to make more objective result, the selection of specialists is important like environmental activists or local residents and so on. The product from this research can provide more scientific support to decide the priority decision.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.310-315
• /
• 2008

Authors design a rotary-type small-scaled linear induction motor(LIM) and a performance test machine before manufacturing a real-scaled LIM for a railway transit. The designed LIM is a single-sided, short primary type and its primary has 4 poles. The rated power is 10(kW). In order to analyze characteristics of the LIM, authors use a mixed 2D-3D FEM analysis. 3-D FEM analysis is used for calculating a distribution of eddy-current on the semi-caped AL-sheet of the secondary reaction. Authors calculate a correction factor of conductivity and an equivalent conductivity on the secondary AL-sheet using a normalized eddy-current. The equivalent conductivity which is calculated in this way includes a transverse edge-effect of the LIM. Authors apply the equivalent conductivity on the secondary AL-sheet of 2D-FEM model and get performance characteristics of the LIM. Basic characteristics such as thrust and normal force, input current, efficiency and power factor of the LIM have been analyzed with the variation of frequency and speed. In order to apply an air-gap control system, the variation of the basic characteristics have been analyzed with the air-gap length variation of the LIM. Finally, authors introduce an operation mode using the air-gap control system and conduct a research on feasibility of the system.

• Journal of the Health Care and Life Science
• /
• v.8 no.2
• /
• pp.143-154
• /
• 2020

The aim of this study was to identify the performance and requirements of the visiting nursing care using Omaha system in public health center. The highest performance were 'personal hygiene', 'pain', 'medication regimen', 'nutrition', 'physical activity', 'sanitation', 'sleep and rest patterns', 'oral hygiene', 'mental health' in order. The lowest performance were 'sexuality', 'postpartum', 'income', 'family planning', 'pregnancy', 'spirituality', 'abuse', 'reproductive function', 'neglect' in order. Problems such as 'postpartum', 'pregnancy' and 'family planning' need to strengthen the role of visiting nurses according to the region. this result will be the basis for visitung nursing care.

• Wind and Structures
• /
• v.38 no.5
• /
• pp.381-398
• /
• 2024

This study presents a mode analysis of 3D turbulent velocity data around a square-section building model to identify the dynamic system for Kármán-type vortex shedding. Proper orthogonal decomposition (POD) was first performed to extract the significant 3D modes. Magnitude-squared coherence was then applied to detect the phase consistency between the modes, which were roughly divided into three groups. Group 1 (modes 1-4) depicted the main vortex shedding on the wake of the building, with mode 2 being controlled by the inflow fluctuation. Group 2 exhibited complex wake vortexes and single-sided vortex phenomena, while Group 3 exhibited more complicated phenomena, including flow separation. Subsequently, a third-order polynomial regression model was used to fit the dynamics system of modes 1, 3, and 4, which revealed average trend of the state trajectory. The two limit cycles of the regression model depicted the two rotation directions of Kármán-type vortex. Furthermore, two characteristic periods were identified from the trajectory generated by the regression model, which indicates fast and slow motions of the wake vortex. This study provides valuable insights into 3D mode morphology and dynamics of Kármán-type vortex shedding that helps to improve design and efficiency of structures in turbulent flow.

• Journal of the Korean Home Economics Association
• /
• v.40 no.2
• /
• pp.143-159
• /
• 2002

Consumer Education Policy for -Focusing on developing Social support System- The purpose of this research is to understand the change of future consuming environment and the characteristics of future potential consumer: the net generations. With those research results, we deduced our goal, content and method of consumer education for these net generations. Finally, I suggested a scheme of the social construction by demand of our future society. Literature review and depth interview are used for this research. The main factors of the change of our future consuming environment are Digitalization, globalization, improvement of consumer sovereignty, Sustainable consumption culture, the increasing pursuit of safe life. It is necessary to educate our future consumer, net generations, the information searching skills in order to be able to obtain right information. We also need to educate them how to practice the safe life and Sustainable consumption and how to get consumers sovereignty. The method of the education requires interchangeable communication. We need social networking system for the support of consumer education, in order to build this social system. We need an administrative support from the government and financial support from corporations. We have suggested that it is very desirable to share all the information developed among Academic field, Consumer related organizations and schools by this network be build.

• Korean System Dynamics Review
• /
• v.4 no.2
• /
• pp.95-130
• /
• 2003

The purpose of this study is to find what causes make public projects hold off, going beyond the planned deadline and budget. Using System Dynamics(SD) and their derivative Urban Dynamics(UD) models, it intends to analyze major feedback loops based on VENSIM and to simulate them with STELLA software, all of which are interrelated with various causes of project delay. To prevent or ameliorate project delay, first of all it advises to focus on endogenous delaying factors not exogenous ones. These factors either reinforce or balance certain loops in complex causal structure, In the case example on the Cremation Building Project in Cheongju, Residents’ participation demand make negotiation put off and delayed negotiation reinforces administrative-expediency planning in order to observe a time limit, on the other hand, once building consensus, it increase both the level of planning performance and public trust. In the meantime, the real planning process used to neglect residents opinions and manage public grievance only through compensation, he a result of simulation, visible fruit of negotiation in the initial phase seems to be not satisfactory owing to funds and time consumed, but after reaching an mutual agreement among stakeholders, planning performance is effective and strategic than administrative-expediency planning viewed in both financial and time angle. It proposes to devise specific tools schematizing project implementation. In order to upgrade the quality of project management, it recommends for planners to adopt key concepts based on SD/UD diagrams and causal loops, which would contribute to enriching Planning abbots.

• Journal of Environmental Impact Assessment
• /
• v.13 no.2
• /
• pp.41-55
• /
• 2004

The purpose of this study is to consider for the introduction of the school eco-audit system as an educational method for sustainable development. First of all, the concept and objective of the education for sustainable development(ESD) are reviewed in order to advance a theory on school eco-audit system. ESD which under the premise of global inter and intra generation justice, resolves to address a mixture of ecological, economical and social aspects, as well as safeguarding limited resources and protecting the environment from pollution and energy. In order to effectively structure uncoordinated environmental activities carried out by schools, the introduction of school eco-audit system in Korea is suggested, which as the model for long-term development, has since been integrated into the school's programme. Activities related to waste, heating, electricity and water are run by a 'Management Team'. By combining all 3 fields of action - i.e. establishing basic organizational conditions, education, and individual ecological measures - the eco-audit proves to be the key to success. In particular, administration agency and method, institutional improvement are presented.

• KIEAE Journal
• /
• v.16 no.6
• /
• pp.29-38
• /
• 2016

Purpose: This study is conducted to contribute to the improvement of Green Standard for Energy and Environmental Design(G-SEED) from the existing energy physical efficiency-centric system to the well-being-centric green building certification system. Method: In order to modify existing G-SEED Certification, three phases of research have been conducted; 1) identification of needs of well-being-centric environment-friendly construction certification system, 2) comparison of domestic certification system with WELL Building standard(WELL) which focuses on human health and promotion of wellness and 3) AHP analysis to sort out the supplement items from WELL. Result: We proposed four alternatives which should be preferentially introduced to the existing domestic certification system; addition of independent 'well-being' section(field) in G-SEED, insertion of 'well-being' indicators in each relevant section of G-SEED, addition of 'well-being' indicators in 'Innovative Design(ID)' of G-SEED and independent score systems for 25 items in a high priority.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.10
• /
• pp.467-474
• /
• 2005

This paper presents a systematic method to compute a reliability measure for a short term electrical load forecasting system using neuro-fuzzy models. It has been realized that the reliability computation is essential for a load forecasting system to be applied practically. The proposed method employs a local reliability measure in order to exploit the local representation characteristic of the neuro-fuzzy models. It, hence, estimates the reliability of each fuzzy rule learned. The design procedure of the proposed short term load forecasting system is as follows: (1) construct initial structures of neuro-fuzzy models, (2) store them in the initial structure bank, (3) train the neuro-fuzzy model using an appropriate initial structure, and (4) compute load prediction and its reliability. In order to demonstrate the viability of the proposed method, we develop an one hour ahead load forecasting system by using the real load data collected during 1996 and 1997 at KEPCO. Simulation results suggest that the proposed scheme extends the applicability of the load forecasting system with the reliably computed reliability measure.

• KIEE International Transactions on Power Engineering
• /
• v.2A no.3
• /
• pp.121-128
• /
• 2002

This study proposes a new method for transmission system expansion planning using fuzzy integer programming. It presents stepwise cost characteristics analysis which is a practical condition of an actual system. A branch and bound method which includes the network flow method and the maximum flow - minimum cut set theorem has been used in order to carry out the stepwise cost characteristics analysis. Uncertainties of the permissibility of the construction cost and the lenient reserve rate and load forecasting of expansion planning have been included and also processed using the fuzzy set theory in this study. In order to carry out the latter analysis, the solving procedure is illustrated in detail by the branch and bound method which includes the network flow method and maximum flow-minimum cut set theorem. Finally, case studies on the 21- bus test system show that the algorithm proposed is efficiently applicable to the practical expansion planning of transmission systems in the future.