• Title/Summary/Keyword: 2 order system

Search Result 14,807, Processing Time 0.049 seconds

Repair policies of failure detection equipments and system availability

  • Na, Seongryong;Bang, Sung-Hwan
    • Communications for Statistical Applications and Methods
    • /
    • v.29 no.2
    • /
    • pp.151-160
    • /
    • 2022
  • The total system is composed of the main system (MS) and the failure detection equipment (FDE) which detects failures of MS. The analysis of system reliability is performed when the failure of FDE is possible. Several repair policies are considered to determine the order of repair of failed systems, which are sequential repair (SQ), priority repair (PR), independent repair (ID), and simultaneous repair (SM). The states of MS-FDE systems are represented by Markov models according to repair policies and the main purpose of this paper is to derive the system availabilities of the Markov models. Analytical solutions of the stationary equations are derived for the Markov models and the system availabilities are immediately determined using the stationary solutions. A simple illustrative example is discussed for the comparison of availability values of the repair policies considered in this paper.

Effect of Job Stress on Job Burnout of Nutrition Teachers and Dietitians in School Foodservice (학교급식 영양(교)사의 직무스트레스가 직무소진에 미치는 영향)

  • Choi, Eun-Young;Kim, Hyun-Ah
    • Korean journal of food and cookery science
    • /
    • v.28 no.2
    • /
    • pp.97-110
    • /
    • 2012
  • The purposes of this study were to examine the levels of job stress and job burnout perceived by nutrition teachers and dietitians in school foodservice in Gyeongsangnam province and to analyze job stress factors affecting job burnout. A total of 270 questionnaires were distributed from December 10 to 29, 2010 and 252 were returned (response rate : 93.3%). A total of 245 were used in the final analysis (usage rate : 90.7%), excluding seven improper questionnaires. The results of this study were as follows : 100% of the respondents were women, and their mean age was 38. 60% were nutrition teachers and 40% were dietitians. The level of job stress and job burnout of the respondents were 2.89 points (on a 5-point Likert scale) and 3.70 (on a 7-point Likert scale), respectively. In regard to job stress factors, job demand (3.97) recorded the highest scores, followed by organizational system (2.99), lack of reward (2.85), interpersonal conflict (2.69), job insecurity (2.63), organizational climate (2.63), and insufficient job control (2.45) in that order. Exhaustion burnout (4.60) recorded the highest points among job burnout factors, followed by cynicism (3.46), and professional efficacy (3.04) in that order. Job stress factors affecting job burnout were organizational system (p<.001), job insecurity (p<.001), lack of reward (p<.001), and organizational climate (p<.01). In conclusion, it is necessary to provide human resources management strategies to lower job demand and workload in order to reduce job stress and job burnout for dietitians and nutrition teachers in school foodservice.

The Effects of Socialization Patterns in Family on the Child's Moral Development and Moral Stage Delay (가정의 사회화유형이 아동의 도덕발달수준 및 단계지체에 미치는 영향)

  • 이령자
    • Journal of the Korean Home Economics Association
    • /
    • v.33 no.1
    • /
    • pp.99-110
    • /
    • 1995
  • The purpose of this study was to provide basic material of positive effects on moral development through educational intervention between parent and chile reciprocal. The major findings were as follows: (1)Child's moral development level was a significant difference according to the level of socialization patterns. (2) Predictability of subvariables of socialization patterns revealed an order of mode of social control, role system and communication system. (3) Therer was a significant difference between stage 2 and the other of stages in socialization patterns. (4) There was a significant difference between stage 2 and stage P in role system. (5) There was no difference between stage 2 and the other of stages in communication system, mode of social control, IQ, and S.E.S.

  • PDF

SELF-SIMILAR SOLUTIONS FOR THE 2-D BURGERS SYSTEM IN INFINITE SUBSONIC CHANNELS

  • Song, Kyung-Woo
    • Bulletin of the Korean Mathematical Society
    • /
    • v.47 no.1
    • /
    • pp.29-37
    • /
    • 2010
  • We establish the existence of weak solutions in an infinite subsonic channel in the self-similar plane to the two-dimensional Burgers system. We consider a boundary value problem in a fixed domain such that a part of the domain is degenerate, and the system becomes a second order elliptic equation in the channel. The problem is motivated by the study of the weak shock reflection problem and 2-D Riemann problems. The two-dimensional Burgers system is obtained through an asymptotic reduction of the 2-D full Euler equations to study weak shock reflection by a ramp.

Analytic study of a new conceptual propulsion device for ships

  • Muscia, Roberto;Sciuto, Giacomo
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • v.2 no.2
    • /
    • pp.75-86
    • /
    • 2010
  • In this work the possibility of obtaining a rectilinear motion of bodies partially or totally submerged without using propellers is evaluated. The system propulsion is based on a pair of counter rotating masses that generate the thrust. The fluid-body system has been schematized in order to carry out a very simple model. Using this model an evaluation of the body motion along a longitudinal direction was performed. The motion equations of the system were written and integrated. The external forces applied to the body depend on its velocity in relation to the water. These forces were obtained by fluid dynamic simulations. Regarding the mechanical configuration suggested, the results obtained show that a certain displacement of the body along a fixed direction is obtainable.

Noise Characteristics of 64-channel 2nd-order DROS Gradiometer System inside a Poorly Magnetically-shielded Room (저성능 자기차폐실에서 64채널 DROS 2차 미분계 시스템의 잡음 특성)

  • Kim, J.M.;Lee, Y.H.;Yu, K.K.;Kim, K.;Kwon, H.;Park, Y.K.;Sasada, Ichiro
    • Progress in Superconductivity
    • /
    • v.8 no.1
    • /
    • pp.33-39
    • /
    • 2006
  • We have developed a second-order double relaxation oscillation SQUID(DROS) gradiometer with a baseline of 35 mm, and constructed a poorly magnetically-shielded room(MSR) with an aluminum layer and permalloy layers for magnetocardiography(MCG). The 2nd-order DROS gradiometer has a noise level of 20 $fT/{\surd}Hz$ at 1 Hz and 8 $fT/{\surd}Hz$ at 200 Hz inside the heavily-shielded MSR with a shielding factor of $10^3$ at 1 Hz and $10^4-10^5$ at 100 Hz. The poorly-shielded MSR, built of a 12-mm-thick aluminum layer and 4-6 permalloy layers of 0.35 mm thickness, is 2.4mx2.4mx2.4m in size, and has a shielding factor of 40 at 1 Hz, $10^4$ at 100 Hz. Our 64-channel second-order gradiometer MCG system consists of 64 2nd-order DROS gradiometers, flux-locked loop electronics, and analog signal processors. With the 2nd-order DROS gradiometers and flux-locked loop electronics installed inside the poorly-shielded MSR, and with the analog signal processor installed outside it, the noise level was measured to be 20 $fT/{\surd}Hz$ at 1 Hz and 8 $fT/{\surd}Hz$ at 200 Hz on the average even though the MSR door is open. This result leads to a low noise level, low enough to obtain a human MCG at the same level as that measured in the heavily-shielded MSR. However, filters or active shielding is needed fur clear MCG when there is large low-frequency noise from heavy air conditioning or large ac power consumption near the poorly-shielded MSR.

  • PDF

A Performance Study of Embedded Multicore Processor Architectures (임베디드 멀티코어 프로세서의 성능 연구)

  • Lee, Jongbok
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.13 no.1
    • /
    • pp.163-169
    • /
    • 2013
  • Recently, the importance of embedded system is growing rapidly. In-order to satisfy the real-time constraints of the system, high performance embedded processor is required. Therefore, as in general purpose computer systems, embedded processor should be designed as multicore architecture as well. Using MiBench benchmarks as input, the trace-driven simulation has been performed and analyzed for the 2-core to 16-core embedded processor architectures with different types of cores from simple RISC to in-order and out-of-order superscalar processors, extensively. As a result, the achievable performance is as high as 23 times over the single core embedded RISC processor.

A Study on the Application of Total Pollution Load Management System for Water Quality Improvement in Agriculture Reservoir (농업용 호소의 수질개선을 위한 오염총량관리제의 적용에 관한 연구)

  • Oh, Dae-Min;Lee, Young-Shin
    • Journal of Environmental Health Sciences
    • /
    • v.35 no.5
    • /
    • pp.365-375
    • /
    • 2009
  • Agriculture reservoirs need a systematic approach that can control water purity and water improvement. The area under study, Bunam Lake exceeds the agricultural water standard level due to contamination from the upper stream. When the Taean Enterprise City was planned, the water quality improvement plan was applied to minimize the environmental change. However, in order to continuously maintain the water quality in the Bunam Lake, it was essential to apply the Total Pollution Load Management System (TPLMs). In order to achieve the targeted water quality in the Bunam Lake, standard flow rates and targeted water quality levels were applied to obtain the loading capacity which is as follows : BOD 1,891.2 kg/d, T-N 1,945.7 kg/d, T-P 131.7 kg/d. Also, the regional development load was calculated as, BOD 1,083.6 kg/d, T-N 942.2 kg/d, T-P 61.8 kg/d, which is required to be deceased :- by BOD 378.4 kg/d, T-N 198.9 kg/d, T-P 31.6 kg/d in order to safely achieve the targeted water quality in the Bunam Lake.

The Effect of Sampling Frequency and Pulse Bandwidth on Estimating Mean Frequencies in an Ultrasonic Doppler System using the Second-Order Sampling (2차 샘플링을 이용한 초음파 도플러 시스템에서 샘플링 주파수 펄스 대역폭이 평균 주파수 측정에 미치는 영향)

  • Ahn, Young-Bok;Park, Song-Bai
    • The Journal of the Acoustical Society of Korea
    • /
    • v.9 no.3
    • /
    • pp.48-55
    • /
    • 1990
  • We analyze the effect of second-order sampling on estimating the mean frequency of the Doppler signal. In order to reduce the sampling frequency of analogue-to-digital converter, it is possible to obtain the Doppler signal by sampling the radio frequency echo signal with the low frequence of $4f_0$/5 or $4f_0$/9 instead of $4f_0$, where $f_0$ is the center frequency of the transmitted signal. The computer simulation and experiments show that if the narrowband signal is transmitted as is usual in the Doppler system, the error of the mean frequency estimates due to the low sampling frequency is negligible.

  • PDF

Dynamic response of transmission line conductors under downburst and synoptic winds

  • Aboshosha, Haitham;El Damatty, Ashraf
    • Wind and Structures
    • /
    • v.21 no.2
    • /
    • pp.241-272
    • /
    • 2015
  • In the current study, dynamic and quasi-static analyses were performed to investigate the response of multiple-spanned and single-spanned transmission line conductors under both downburst and synoptic winds considering different wind velocities and different length spans. Two critical downburst configurations, recommended in the literature and expected to cause maximum conductor reactions, were considered in the analyses. The objective of the study was to assess the importance of including the dynamic effect when predicting the conductor's reactions on the towers. This was achieved by calculating the mean, the background and the resonant reaction components, and evaluating the contribution of the resonant component to the peak reaction. The results show that the maximum contribution of the resonant component is generally low (in the order of 6%) for the multiple-spanned system at different wind velocities for both downburst and synoptic winds. For the single-spanned system, the result show a relatively high maximum contribution (in the order of 16%) at low wind velocity and a low maximum contribution (in the order of 6%) at high wind velocity for both downburst and synoptic winds. Such contributions may justify the usage of the quasi-static approach for analyzing transmission line conductors subjected to the high wind velocities typically used for the line design.