• ETRI Journal
• /
• v.7 no.2
• /
• pp.34-39
• /
• 1985

The operating support systems such as CSMS, TLMOS, and SLMOS may be related each other. At the present time, UNIX system is most popular operating system. TLMOS and SLMOS have been developed under the UNIX environment and using C language. On the other hand CSMS was built on HP RTE O. S. using Pascal. When we constuct the operation and maintenance organization by networking several operations support system, the interface of intersystem must be simple and the integrity of whole system must be kept. It is somewhat valuable to investigate transfering CSMS from RTE O. S. to UNIX in order to integrate operations and maintenance systems. Here, we give a basic material about porting CSMS in UNIX.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10A
• /
• pp.1764-1771
• /
• 2001

It has developed a PCM signal acquisition(PCMA) system which can analyze status of signals in order to establish rapid diagnosing in TDX-families signaling service equipment. We develop the quick Fourier transform(QFT) for length 2$\^$M/ data to analyze the power spectral of the PCMA system. This algorithm can reduces the number of floating-point operations necessary to compute the DFT by a factor of two or four over direct methods or Goertzels method for prime lengths. In the experimental results, the system classifies the type of signals and finally discriminates the digit.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.2
• /
• pp.51-63
• /
• 2001

Korea gas industrial because of received LNG in 1987 was converted by the Gas Safety Management System in relation to city gas, LPG and LNG. Gas accident were caused by treatment problem on the supplier and user, on technical and use management mater, on facilities and goods, and included problem with gas safety connection system. This study is present standard application plan of each department to use planning gas technical standard and gas utilization standard of introduction model than statute for change of self-regulation management system and complicated regulation of examination center and order.

• Korean System Dynamics Review
• /
• v.6 no.2
• /
• pp.95-116
• /
• 2005

The purpose of this study is to analyze the structure of renewable energy market in order to deploy more renewable energy in Korea on the basis of information asymmetry between suppliers and demanders. To attain this purpose we develop the model to analyze and simulate the renewable market using system dynamics. This model is developed not to forecast the accurate size of market but to learn more structure of market using our limited data, mental model and knowledge of market.

• IE interfaces
• /
• v.1 no.2
• /
• pp.25-34
• /
• 1988

Simulation is known to be a valuable tool for design and operation of Flexible Manufacturing Systems(FMSs) under study. However, in order for simulation to be useful, lots of knowledges about the behavior of system to be designed, statistics for output analysis, modeling techniques and a specific simulation language are required by the simulationist. In this paper a way to build simulation support system for nonexperts at simulation will be described and a simulation support system for FMS design and operation developed by the authors will be demonstrated.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.2
• /
• pp.33-42
• /
• 2018

The Patient Safety Act was enacted on July 26, 2016. Patient safety law is a method to prevent harm by collecting and accumulating various errors through the reporting system. Therefore, in order for this law to be successfully implemented, it is necessary to vitalize 'the autonomous reporting and reporting learning system of patient safety accidents'. And In order for this system to be activated, a large amount of reporting data accumulation is a prerequisite. Nevertheless, there were only two reports in about 17 months. In this paper, I will criticize the validity of the current autonomous reporting system and the two proposed amendments, I would like to propose the introduction of a partial obligation reporting system.

• Management Science and Financial Engineering
• /
• v.4 no.2
• /
• pp.15-42
• /
• 1998

A joint problem of order delivery, setup reduction, and cost-sharing in a two-echelon inventory system in which a vendor supplies multiple products to a group of buyers is studied here. The basic premise is that buyers have independently implemented setup reduction programs to acquire benefits from small order sizes. Doing so, however, causes the buyers' individually optimal order cycles to be differ from that of the vendor. In conjunction with this, two models are considered. In the first model, a multi-buyers single product situation is considered in which the vendor implements a joint supply cycle policy. However, buyers, as the dominant party, insist after implementing the individually optimal setup reduction that the vendor accept their individually optimal order schedules. In the second model. a multi-products, single buyer situation is considered in which the buyer implements a joint order policy. Here, the vendor, as the dominant party, refuses to cooperate fully with the buyer's individually reduced joint order schedule, and designs his own individually optimal setup reduction mix for each product under a given budget constraint. This led to a study of an integrated Setup Reduction/Break-even Pricing Policy for each situation to eliminate mismatches in individually optimal cycle times.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.1
• /
• pp.35-44
• /
• 1996

A design method for a teleoperator robot system is presented in this paper. The control system consists of two phases; approach phase and contact one. The end-effector position of the estimated slave robot and the contact force between the end-effector and wall are displayed on the monitors at control site, using which the operator controls the teleoperator system. The approach phase controller is designed using Smith's principle and the contact one designed based upon the structured singular value ${\mu}$ in order to increase the robustness of the system. The uncertainatices such as communication time delay and the variations of system parameters are considered as a muliplicative pertubation. Computer simulations are conducted in order to evaluate the performance of the proposed design method. It is found that desirable control performance, especially in the contact phase, is obtained if the control mode is switched into contact phase when the estimated position of the slave robot end-effector is in front of the wall.

• The Journal of Engineering Research
• /
• v.8 no.1
• /
• pp.13-22
• /
• 2006

The purpose of this study is to find out how we can improve the Registered Cultural Properties System in order to preserve and utilize of modern buildings which have been damaged and destroyed. The main object of the Registered Cultural Properties System is to build the cultural properties preservation system. But nowadays, it is very difficult to preserve modern buildings in city areas because of the desire of development for the site. So we need to approach economically in order to compensate for Registered Cultural Properties System. In this study, I suggested 4 type of system to preserve modern buildings by economical and lawful approach.

• Journal of computational fluids engineering
• /
• v.10 no.2
• /
• pp.48-53
• /
• 2005

This work discusses the numerical analysis, the design and experimental test of the SMA actuator along with its capabilities and limitations. Convective heating and cooling using water actuate the SMA(Shape memory alloy) element of the actuator. The fuel such as propane, having a high energy density, is used as the energy source for the SMA actuator in order to increase power and energy density of the system, and thus in order to obviate the need for electrical power supplies such as batteries. The system is composed of a pump, valves, bellows, a heater(burner), control unit and a displacement amplification device. The experimental test of the SMA actuator system results in 150 MPa stress(force : 1560 N) with $3\%$ strain and 0.5 Hz. actuation frequency. The actuation frequency is compared with the prediction obtained from numerical analysis. For the designed SMA actuator system, the results of numerical analysis were utilized in determining design parameters and operating conditions.