• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.345-356
• /
• 1994

The Shirts Blouse was produced through the process of shirts Blouse pattern making by utilizing CAD System developed by PAD Sys-tem Techologies Co. Ltd that is suitable to educational use or industrial use. The purpose of this study was to provide the basic data for the development of efficient and various design patterns by applying this pro-cess to the actual business of apparel making. The results were as follows: 1. The applicable range of CAD system 1) The repeated work can be avoided by thansforming and developing the basic pattern stored and the storage and remodification were easy. 2) The deletion duplication movement and copy of all points and lines in the pattern can be made freely and measurement of all lengths and angles the attachment of two patterns were possible. 3) The grading Library of the basic pattern was applied as it was and the time was curtailed by adding only several grading points with the change of design. 2. The problem in the use of the CAD System 1) Through the input of basic pattern by the digitizer the minute size difference was generated as each point on the curve came to be designated. 3) In grading the line of neck girth there was inconveniences to go to the plan view in order find out deviation.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.151-167
• /
• 2019

Korea's current Land Category Classification System(LCCS) can not accurately register of complex and diverse Status of land use in Cadastral Record. Therefore, in order to draw implications for the improvement of LCCS in Korea, Shin SW and four others published a paper titled 'A Study on Land Category System of Domestic and Foreign Country' in 2013. This paper compared the 'land category', 'land use' and 'land cover' of six countries on the same line, and Some non-factual content was described. So, presented a new perspective on this. Looking forward, I hope that reasonable alternative will be presented based on the understanding of LCCS of Germany, Japan and Taiwan. In the future research project, to study the history of LCCS in Germany and Taiwan and suggest to refer to improvement of LCCS of Korea.

• Journal of the Korean Society for Library and Information Science
• /
• v.41 no.2
• /
• pp.31-54
• /
• 2007

The aim of this paper is to analyse correlation between the new library act and policy tasks of public libraries in Korea. In order to attain this objective, author set seven policy tasks, that is, amendment and complement of master plan for library development, unification of public library administrative system, institutionalization of local public library and information policy, job analysis and improvement of library personnel system, infrastructure expansion and revision of various legal standards, standardization of management evaluation and statistical system, and strong connection between public library and related cultural institutions. And author suggested the alternatives to drive and improve of these policy tasks.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_2
• /
• pp.631-642
• /
• 2012

This study aims to predict inundation and flood-stricken areas more accurately by simulating flood damage caused by reversible flow of rain water in the upper water system through precise 3D terrain model and backwater output. For the upstream of the South Han-River, precise 3D terrain model was established by using aerial LiDAR data and backwater by area was output by applying the storm events of 2002 including the history of flood damage. The 3D flood simulation was also performed by using GIS Tool and for occurrence of related rainfall events, inundation events of the upriver region of water system was analyzed. In addition, the results of flood simulation using backwater were verified by making the inundation damage map for the relevant area and comparing it with flood simulation's results. When comparing with the results of the flood simulation applying uniformly the gauging station's water surface elevation used for the existing flood simulation, it is found that the results of the flood simulation using backwater are close to the actual inundation damage status. Accordingly, the causes of flood occurred in downstream of water system and upstream that has different topographic characteristics could be investigated and applying the simulation with backwater is proved more proper in order to procure accuracy of the flood simulation for the upriver region.

• Journal of Radiation Protection and Research
• /
• v.12 no.1
• /
• pp.12-25
• /
• 1987

A basic multichannel analyser (MCA) system have been designed and constructed with the successive approximation type ADC (Analog to Digital Converter). Linear Gate, window, and palse stretcher consist of mainly linear and logic IC's, and are properly combined together to achieve short dead time and good linearity of the system. ADC 1211 (analysing time: $120{\mu}sec$) and S-RAM (static random acess memory) 6264 are used in ADC module. Two 6264 memories are connected in parallel in order to-provide enough counting capacity ($2^{16}-1$). Interfaced microcomputer Apple II controls this system and analizes the counted data. The system is tested by input pulses between 0V to 10V from oscillator.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.7
• /
• pp.606-613
• /
• 2002

In this paper we applied a transmit beamforming technique to the underwater acoustic communication system for high rate data transmission. A prototype transmit system was designed and implemented with the general purpose DSP processor and multiple digital-to-analog converters. The performances of the implemented system were evaluated by the experiment in water tank. In order to simplify the procedure the channel coding and equalizer were omitted. And the simplest OOK (On-Off Keying) technique in digital communication methods was applied. The experimental result shows that the transmission data rate is higher about 3 times in the case of 5 hydrophone transmitting may than 1 hydrophone transmitter at bit error rate 10/sup -2/. We verified that the maximum data rate was 400 bps for speech signal transmission in water tank.

• Journal of the Korea Society for Simulation
• /
• v.22 no.2
• /
• pp.33-40
• /
• 2013

This paper explores a border security system based on agent-based modeling and simulation (ABMS). The ABMS software platform, map aware non-uniform automata, is used to model various scenarios and evaluate the border security system given a set of infiltrators who have evolutionary behavior governed by genetic algorithm (GA). we formulated an optimization model and approximately solved it using a GA in order to capture near optimal behavior of an infiltrating force. The results presented give two significant insights for our border security system in that optimizing the infiltrator's behavior can make a significant difference and the quantitative results regarding the infiltrator's avoidance of each asset can be viewed as capturing their relative importance.

• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.171-178
• /
• 1998

The added viscoelastic dampers increase damping and stiffness of buildings and results in so called non-classical or non-proportional damping problem. In this system the eigenvectors of the undamped system may not diagonalize the damping matrix, and the system is generally analyzed by converting the equation of motion into a 2n first order state-space form. As this approach is complex and time-consuming compared to the classically damped problem, the system is often analyzed by neglecting the off-diagonal terms in the damping matrix. In this paper the theoretical background of the approximate approach is studied, and the vibration characteristics of a three-story shear building with a viscoelastic damper are investigated using the exact and approximate method. It is found that the approximate method may produce good result when the additional damping is small, but as the damping increases the error also increase.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.39-43
• /
• 2011

In this research, full-scale fire test was performed on a real house for the evaluation of the performance of waterworks direct-coupled sprinkler system. The fire was set to occur as spontaneous combustion as the cooking oil overheats. The size of house is $56m^2$ and it consists of a living room, a kitchen, and a room. In order to verify the performance of waterworks direct-coupled sprinkler system, it was installed in the kitchen. The result of the test showed that the fire started from the kitchen enlarged up to its ceiling but it was soon exhausted as the sprinkler started to work. The pressure of the waterworks was 0.28 MPa when the sprinkler operated, by which it verified that fire could go out even by waterworks pressure of the general residence.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.2
• /
• pp.223-229
• /
• 2008

In this paper. we propose the real-time vision system which judges drowsiness driving based on levels of drivers' fatigue. The proposed system is to prevent traffic accidents by warning the drowsiness and carelessness using face-image analysis and fuzzy logic algorithm. We find the face position and eye areas by using fuzzy skin filter and virtual face model in order to develop the real-time face detection algorithm, and we measure the eye blinking frequency and eye closure duration by using their informations. And then we propose the method for estimating the levels of drivel's fatigue based on measured data by using the fuzzy logic and for deciding whether drowsiness driving is or not. Finally, we show the effectiveness and feasibility of the proposed method through some experiments.