• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.77-85
• /
• 2010

Recently, As increasing cleanroom size, Stocker system is trending the large size and long distance for LCD material transfer system In order to rise a rate of production, the manufacturer are on the decrease of total tact time with Stocker system And the manufacturer are requested to high speed of next generation Stocker system Also manufacturers for the high oil prices through energy-saving conservation to minimize plant operating costs are required. Therefore, this paper propose optimal design of high efficiency Contactless Power Supply(CPS) system about high speed and energy savings of next generation Stocker system This paper proposes CPS system is applied in the long distance and straight section with Stocker system for energy savings. The test results of input!output characteristic and efficiency of CPS system on operating pattern of Stocker system were analyzed, and proved the applicability on commercial use.

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.281-287
• /
• 1999

In order to take a good look at effectiveness of cooling of Fog system and Pad-Fan system, we chose 49 farm households which were installed evaporative cooling system and 2 farm households which were installed Pad-Fan system and Fog system for a test. We execute the test on 29 households out of 49.6 households, which were installed Pad-Fan system, were able to use; however, 6 household out of 9 which were installed Fog system couldn't use it. The main reason was the clogged on nozzle. The cooling efficiency on Pad-Fan system was 77.4%, but it was very poor on Fog system. Since there are many problems on Fog system, we need more research on size of fog, the location of nozzle, control of Fog systems.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.4
• /
• pp.370-376
• /
• 2005

For the purpose of investigating the effective removal of heating/cooling load from light-weighted building envelope, two air-conditioning systems, conventional parameter air-conditioning system and air-barrier system, are evaluated and compared by both experiment and simulation with six different cases during heating and cooling season. In addition, the characteristics of window-side building thermal load are assessed by varying supply air velocity in order to seek the optimal system operation condition. The results are as follows. 1) Air-barrier system is more effective to remove heating/cooling load at perimeter zone than conventional parameter air-conditioning system. Moreover, the better effectiveness appears during cooling season than during heating season. 2) The experiment during cooling season provides that indoor temperature of air-barrier system shows $1^{\circ}C$ less than that of the conventional system with similar outdoor air temperature profile, and indoor temperature distribution is more uniform throughout the experimented model space. It concludes that air-barrier system can achieve energy saving comparing to the conventional system. 3) The capturing efficiency of air-barrier system is 0.47 on heating season and 0.2 on cooling season with the same supply air volume. It results that the system performs effectively to remove building thermal load, moreover demonstrates high efficiency during cooling season. 4) The simulation results provide that capturing efficiency to evaluate the effective removal of building load from perimeter zone shows high value when supply air velocity is 1 m/s.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.2
• /
• pp.118-130
• /
• 2020

Modern weapon systems are composed of complex systems(System of Systems) and require a complex and advanced operational concept that performs missions through interoperability with various weapon systems. In order to derive the operational concept of the weapon system that the military wants to acquire (i.e., single mission, component operation, Joint and Alliance operations), it is necessary to identify the system related to the weapon system, environmental factors and restrictions of the weapon system to be developed. Through the derivation of the operational concept, the weapon system acquisition agency can reasonably and accurately extract various and complex requirements. In this paper, we propose a complementary method of using MND-AF to OCD and ORD required in weapon system acquisition process. MND-AF can increase the understanding and consensus of business stakeholders (users, acquirers, developers, etc.) by showing the results of weapon system analysis from various perspectives. We compare the items in the standard form of OCD and ORD with the MND-AF outputs.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.582-588
• /
• 2012

In this paper, a highly miniaturized and performed UWB bandpass filter has been newly designed and implemented by embedding all the passive elements into a multi-layered PCB substrate with high dielectric $SrTiO_3$ composite film for 3.1 - 4.75 GHz compact UWB system applications. The high dielectric composite film was utilized to increase the capacitance densities and quality factors of capacitors embedded into the PCB. In order to reduce the size of the filter and avoid parasitic EM coupling between the embedded filter circuit elements, it was designed by using a $3^{rd}$ order Chebyshev circuit topology and a capacitive coupled transformation technology. Independent transmission zeros were also applied for improving the attenuation of the filter at the desired stopbands. The measured insertion and return losses in the passband were better than 1.68 and 12 dB, with a minimum value of 0.78 dB. The transmission zeros of the measured response were occurred at 2.2 and 5.15 GHz resulting in excellent suppressions of 31 and 20 dB at WLAN bands of 2.4 and 5.15 GHz, respectively. The size of the fabricated bandpass filter was $2.9{\times}2.8{\times}0.55(H)mm^3$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3972-3985
• /
• 2016

Organizations have been implementing mobile applications that actually connect to their backend enterprise applications (e.g. ERP, SCM, etc.) in order to increase the enterprise mobility. However, most of the organizations are still struggling to fully satisfy their mobile application users with the enterprise mobility. Even though it has been regarded as the right direction that the traditional enterprise system should move on, the studies on the success model for mobile enterprise applications in user's acceptance perspective can hardly be found. Thus, this study focused not only to redefine the success of the mobile enterprise application in user's acceptance persepective, but also to find the impacts of the factors on user's usage behavior of the mobile enterprise applications. In order to achieve this, we adopted the Technology Acceptance Model 2 (TAM2) as a model to figure out the user's behavior on mobile applications. Among various mobile enterprise applications, this study chose mobile ERP since it is the most representing enterprise applications that many organizations have implemented in their backend. This study found that not all the constructs defined by Davis in TAM2 have a significant influence on user's behavior of the mobile-ERP applications. However, it is also found that most social influence processes of TAM2 influence user's perception of the degree of interaction by mobile-ERP applications.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.27-36
• /
• 2000

A higher order panel method based on B-spline representation for both the geometry and the velocity potential is developed for the solution of the flow around two-dimensional lifting bodies. Unlike Lee/Kerwin, who placed multiple control points on each panel and solved the overdetermined system of equation by the least square approach, the present method places only as many number of control points as required by the unknowns of the problem. Especially, a null pressure jump Kutta condition at the trailing edge is found to be effective in stabilizing the solution process and in predicting the correct solution. The new approach, is validated to be accurate through comparison with the analytic solution for a 2-D airfoil and to be less time-consuming due to fewer number of panels required than that used in Lee/Kerwin.

• Journal of Technologic Dentistry
• /
• v.41 no.4
• /
• pp.279-285
• /
• 2019

Purpose: The dental CAD / CAM system has been popular with the development of the digital dental industry. Zirconia is a typical material in dental CAD / CAM systems. Zirconia crowns are classified into single layer and double layer. This study is about the double layer crown of zirconia. The surface roughness, bond strength and fracture patterns of the zirconia surface were observed. Methods: Zirconia blocks were cut using a low speed cutter. Sintered to form a plate shape (6mm × 6mm × 3mm). The prepared specimens were surface treated in four ways. Surface roughness and bond strength were measured. And the fracture pattern was observed. Results: Result of surface treatment of zirconia. The surface roughness test results were as ET 2.87 ㎛, ST 2.67 ㎛, LT 2.44 ㎛, AT 2.41 ㎛, CN 2.08 ㎛ order. Bond Strength results were as LT 25.09 MPa, AT 23.27 MPa, ST 21.27 MPa, ET 21.09 MPa, CN 16.12 MPa order. Fracture patterns showed cohesive failure of 25-50% of the bond area. Conclusion: Surface roughness, bond strength and fracture pattern of the zirconia surface were observed. Etching the surface treatment of zirconia materials has been shown to affect the surface roughness. Zirconia special binder treatment has been shown to affect the bond strength improvement.

• Korean journal of food and cookery science
• /
• v.8 no.1
• /
• pp.31-41
• /
• 1992

This study has made use of the work sampling for work analysis and productivity of food service institutions centering on 3 general hospitals of 400∼600 beds and centralized service system in Seoul. The results were as flollows; 1. In the mean work percent of dietitians: The indirect work functions marked the highest, as it was 22.0% for the direct work functions, 57.4% for the indirect work functions and 20.6% for the delays. Among the indirect work functions, the decreasing order was original clerical (38.1%), instruction or teaching (8.5%), conference or interview (8.5%), and appraisal (2.3%). 2. In the mean work percent of clerical personnels: The direct work functions (67.2%) marked the highest. Among those, routine clerical was 64.3%, and receiving was 2.8%. 3. In the mean work percent of workers: The direct work functions (77.4%) marked the highest. Among those, the decreasing order was service (24.7%), cooking (22.5%), cleaning (18.2%), and transportation (10.3%). 4. Work percent per labor hour: Dietitians usually continued to work even during the lunch time. In case of clerical personnel working in turn, work percent was high even during the lunch time, however in the other case, it was very low. It was shown that the workers had lunch and break time after every their service. 5. The number of meals served per labor hour were 6.3 meals, and labor time spent per served meal 9.8 minutes.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.245-248
• /
• 2001

Nomura Kohsan Corp. is producing oxides, such as ZnMn$_2$O$_4$, ZnFe$_2$O$_4$, and ZnO, by burning the used dry manganese cells and by sorting out the remnant materials. It is possible to use the recycled materials of the spent dry batteries as the raw materials of deflection yoke cores. Making hish roasting temperature in the recycling system has an effect in reduction of the impurities. As a result, the loss of the cores using the recycled materials is lower. When using the recycled materials, it is required to add Mg (OH)$_2$. ZnO, and Fe$_2$O$_3$in order to rectify the composition of the MnMgZn ferrite for deflection yoke core applications. Furthermore, in order to disappear ZnMn$_2$O$_4$in the formation, it is necessary to control at higher calcining temperatures. The MnMgZn ferrite of using the recycled materials becomes Toss equivalent to the conventional material. TDK Corp. is manufacturing the deflection yoke cores from 1996 using the material recycled from the spent dry batteries.