• Management & Information Systems Review
• /
• v.19
• /
• pp.199-221
• /
• 2006

The purpose of this study is to expand businesses' adoption of the Enterprise Resource Planning System (E.R.P.S.). In order to accomplish the objective, the following conditions need to be fulfilled. 1) Clearness of the goal and expected effect of E.R.P.S. adoption 2) Definiteness of the extent of E.R.P.S. construction 3) The management's will to E.R.P.S. adoption If the E.R.P.S is adopted, the following effects are expected. 1) Speedy quality decision-making is possible. 2) Time taken from the order of the product to its release can be curtailed (from 40days to 10days). 3) Time taken for the development of the product can be shortened (from 24 months to 10 months). 4) Cost reduction is possible by using necessary information in real time.

• Journal of Power Electronics
• /
• v.10 no.2
• /
• pp.176-180
• /
• 2010

This paper deals with a control method to reduce the torque ripple of a permanent magnet synchronous motor (PMSM) for electric power steering (EPS) systems. Such an application requires a very low torque ripple in order to maintain a good steering feel. However, because of spatial limitations, it cannot help having a partial saturation in the iron core of the PMSM for an EPS system, and this saturation results in a significant torque ripple. Thus, this paper analyzes the torque ripple caused by the magnetic saturation of a PMSM and proposes a method with respect to inductance measurement to verify the partial saturation. In addition, it is shown that a compensation current is needed in order to minimize the torque ripple when a PMSM is driven in the high torque region. The estimation process of the current and the torque ripple decreased by the current are presented and verified with test results.

• IE interfaces
• /
• v.6 no.2
• /
• pp.53-65
• /
• 1993

This paper deals with the development of a software module for production planning and scheduling activities of an existing Flexible Machining and Assembly System (FMAS). The Production Planning Module uses the hierarchical and sequential scheme based on "divide and conquer" philosophy. In this module, routes are determined based on the production order, orders are screened, tools are allocated, and order adjustments are executed according to the allocated tools. The Scheduling Module allocates the resources, determines the task priority and the start and completion times of tasks. Re-scheduling can be done to handle unforeseen situations such as lumpy demands and machine breakdowns. Since all modules are integrated with a central database and they interface independently, it is easy to append new modules or update the existing modules. The result of this study is used for operating the real FMAS consisting of a machining cell with 2 domestic NC machines and a part feeding robot, an assembly cell with a conveyor and 3 robots, an inspection cell, an AGV, an AS/RS, and a central control computer.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.2
• /
• pp.62-66
• /
• 2015

Induction generator is easy to durability and maintenance than the synchronous generator. So, recently Induction generator has been widely applied to small-scale hydroelectric power plant. When the rotor is operating faster than synchronous speed, induction machine can generate electric power. Induction generator has a large inrush currents, such as the starting current of the induction motor. Induction motor has been designed a variety of rotor shape in order to reduce starting current. Since the occurrence of high inrush current cause a voltage drop to the system, it will need to reduce possible. Because the starting current of the squirrel-cage induction motor varies in accordance with the rotor shape, it is necessary to analyze the magnitude of inrush current in order to apply to the generator. In this study, we analyzed the inrush current and the voltage drop caused in accordance with the rotor shape of 1500kw induction generator.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.2
• /
• pp.161-167
• /
• 2005

The improvements of the propulsive engine efficiencies could reduce the fuel consumption. Therefore. for a marine main diesel engine the substantial increase of stroke bore ratio. so that the engine speed can be significantly reduced in order to increase the Propulsive efficiency. As a typical example. a Sulzer RTA 60C engine has acylinder diameter of 600 mm and each cylinder is capable of delivering 2.369 kW in the speed range 91-114 rpm. In order to Provide basic data for thermal system of marine engine. this work performs an experimental study of heat transfer in a square channel with one rib-roughened wall under sin91e mode of reciprocating oscillation. A selection of heat transfer measurements illustrates the manner by which the reciprocating channel with two opposite heating walls has the higher heat transfer Performance than with four heating wall.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.301-306
• /
• 2000

Small passenger and car carrier ships are mainly used as a connection way between land and small islands. And these ships should be designed to enlarge the capacity of passenger and car loading within limited space and draft. So the resonances of various vibrations exist in normal operation range of engine and propulsion shafting. In this paper, hull's superstructure vibration which was especially induced by the 1st order excitation of whirling vibration on the 2-engines and 2-propulsion shafting systems is introduced. Also these are verified via the theoretical analysis using transfer matrix method and FEA software ANSYS and its vibration measurement.

• Advances in nano research
• /
• v.16 no.2
• /
• pp.141-154
• /
• 2024

This study aims to develop explicit models to investigate thermo-mechanical interactions in moving nanobeams. These models aim to capture the small-scale effects that arise in continuous mechanical systems. Assumptions are made based on the Euler-Bernoulli beam concept and the fractional Zener beam-matter model. The viscoelastic material law can be formulated using the fractional Caputo derivative. The non-local Eringen model and the two-phase delayed heat transfer theory are also taken into account. By comparing the numerical results to those obtained using conventional heat transfer models, it becomes evident that non-localization, fractional derivatives and dual-phase delays influence the magnitude of thermally induced physical fields. The results validate the significant role of the damping coefficient in the system's stability, which is further dependent on the values of relaxation stiffness and fractional order.

• The Journal of Society for e-Business Studies
• /
• v.14 no.2
• /
• pp.117-130
• /
• 2009

Lots of applications that represent and utilize geographic information on the Web have emerged on the Web. In addition, personal electronic devices equipped with GPS function, which can record personal location information in real time, are being increasingly adopted by people. Such geographic information enables Internet business companies to provide users more useful services based on the location information. Most successful Internet business companies have adopted and utilized Web 2.0 technologies, which promote users' participation and emphasize openness and information sharing. Especially, using open APIs (Application Programming Interfaces) can reduce the costs of a program development. In this study, we design and develop a banner advertisement system based on geographic information using open APIs. We propose a business model using the advertisement system, and a prototype system has been illustrated in order to explain the proposed business model. Finally, we summarize the benefits of our system by describing factors generating values of the proposed business model. Hopefully, main ideas proposed in this paper can be applied to real industry sectors that use geographic information widely such as travel, real estate and so on.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.627-640
• /
• 2010

In a web 2.0 environment, as a wide range of web services are being utilized, it requires quick and convenient way to develop web applications. For this purpose, the framework has been recently introduced and has been applied to web applications. However, software quality application model has not been presented for the web application using framework. In this paper, we develop web application, online library system using a number of frameworks. The system allows users to freely share book information. In order to evaluate the system, we present new software quality evaluation model for web applications using framework. The five quality attributes, functionality, usability, efficiency, maintainability, stability are defined based on the international standard for software quality evaluation, ISO/IEC 9126-2. We also propose the evaluation metrics for the web application using framework and perform quantitative evalzuation for the online library system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.2
• /
• pp.83-90
• /
• 2012

In this paper, an intelligent visual surveillance system based on a NIOS II embedded platform is implemented. By this time, embedded based visual surveillance systems were restricted for a special purpose because of high dependence upon hardware. In order to improve the restriction, we implement a flexible embedded platform, which is available for various purpose of applications. For high speed processing of software based programming, we improved performance of the system which is integrated the SOPC type of NIOS II embedded processor and image processing algorithms by using software programming and C2H(The Altera NIOS II C-To-Hardware(C2H) Acceleration Compiler) compiler in the core of the hardware platform. Then, we constructed a server system which globally manage some devices by the NIOS II embedded processor platform, and included the control function on networks to increase efficiency for user. We tested and evaluated our system at the designated region for visual surveillance.