• Investigative Magnetic Resonance Imaging
• /
• v.18 no.3
• /
• pp.244-252
• /
• 2014

Purpose : We proposed a multi-physiological signals based real-time intelligent triggering system(MITS) for Cardiac MRI. Induced noise of the system was analyzed. Materials and Methods: MITS makes cardiac MR imaging sequence synchronize to the cardiac motion using ECG, respiratory signal and second order derivative of $SPO_2$signal. Abnormal peaks due to arrhythmia or subject's motion are rejected using the average R-R intervals and R-peak values. Induced eddy currents by gradients switching in cardiac MR imaging are analyzed. The induced eddy currents were removed by hardware and software filters. Results: Cardiac MR images that synchronized to the cardiac and respiratory motion are acquired using MITS successfully without artifacts caused by induced eddy currents of gradient switching or subject's motion or arrhythmia. We showed that the second order derivative of the $SPO_2$ signal can be used as a complement to the ECG signals. Conclusion: The proposed system performs cardiac and respiratory gating with multi-physiological signals in real time. During the cardiac gating, induced noise caused by eddy currents is removed. False triggers due to subject's motion or arrhythmia are rejected. The cardiac MR imaging with free breathing is obtained using MITS.

• Progress in Medical Physics
• /
• v.23 no.3
• /
• pp.162-168
• /
• 2012

In proton therapy, in vivo dose verification is one of the most important parts to fully utilize characteristics of proton dose distribution concentrating high dose with steep gradient and guarantee the patient safety. Currently, in order to image the proton dose distribution, a prompt gamma distribution detection system, which consists of an array of multiple CsI(Tl) scintillation detectors in the vertical direction, a collimator, and a multi-channel DAQ system is under development. In the present study, the optimal design of prompt gamma distribution detection system was studied by Monte Carlo simulations using the MCNPX code. For effective measurement of high-energy prompt gammas with enough imaging resolution, the dimensions of the CsI(Tl) scintillator was determined to be $6{\times}6{\times}50mm^3$. In order to maximize the detection efficiency for prompt gammas while minimizing the contribution of background gammas generated by neutron captures, the hole size and the length of the collimator were optimized as $6{\times}6mm^2$ and 150 mm, respectively. Finally, the performance of the detection system optimized in the present study was predicted by Monte Carlo simulations for a 150 MeV proton beam. Our result shows that the detection system in the optimal dimensions can effectively measure the 2D prompt gamma distribution and determine the beam range within 1 mm errors for 150 MeV proton beam.

• Fire Science and Engineering
• /
• v.16 no.1
• /
• pp.66-76
• /
• 2002

This paper includes new nozzle design, basic design factors of water mist system that minimize a thermal damage of cable causing business interruption and applying underground utility tunnel. A underground concrete structure (2.5 m(H)$\times$2.5 m(W)$\times$25 m(D)) is constructed in order to test a nozzle performance. Under the designing fire scenario, critical thermal damage of cable sheath ($400^{\circ}c$) reached within a 2 minutes with unsuppressed fire, but type 1 nozzle (SMD 470 $\mu{m}$) and type 2 nozzle (SMD 650 $\mu{m}$) control cable temperature below $400^{\circ}c$. A system performance and fundamental design factors; K factor, flow rate, spray angle, size distribution, nozzle pressure, spray density are analyzed and proposed for system optimization.

• Journal of the Korean Society of Systems Engineering
• /
• v.4 no.2
• /
• pp.1-13
• /
• 2008

The development of hull curved plate forming automation system in ship production field begins from the need of stakeholders such as enterprise organization, who need the reduction of cost and time and improvement of productivity, and end users who work for this production process. Even though hull curved plate forming automation system has small scale, it is reasonable to consider the system as an interdisciplinary system, because the system includes all of hardware, software, human and information and has a specified objective to be performed. In this paper, introduction of 4 leading Model-Based Systems Engineering (MBSE)methodologies is described and SysML(Systems Modeling Language), which is designed to analyze, specify, design, and verify complex systems, is introduced in order to support those methodologies. Especially, SysML is applied to system modeling of hull curved plate forming automation system and focused on. The structure diagrams and behavior diagrams based on operational context of the automation system are used to make system architecture. The performed application of SysML to the hull curved plate forming automation system shows an example of applying SysML to the development of other autonomous systems in ship production domain.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.937-946
• /
• 2021

The floating crane is used to lift the heavyweight on the ocean. The floating crane has a winch system for lifting the heavyweight and the system is controlled by the winch control system. The heavyweight is lifted safely by control of the winch control system. Before the make the control system and controller, there are many restricted conditions to test and validate at design and development steps. In order to solve the problems, commonly use the HILS (Hardware-In-the-Loop-Simulation). HILS is the method of test and validation for the hardware control system. It can be composed of the control system in hardware with surrounding environments which is a virtual model. In this study, we developed the winch system model for HILS of the 150t winch control system in a floating crane. Through this simulation and winch model, it can be applied to HILS for the winch control system.

• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.111-120
• /
• 1985

The oxidation reaction of CO on the catalysts 4 mol%, 8 mol%, and 12 mol% Cd-doped ${\alpha}-Fe_2O_3$ is individually investigated. Regardless of Cd doping level, over-all reaction order for the oxidation of CO is 1.5; the first order with respect to CO and the one-half order with respect to $O_2$. Over the temperature range of 350∼$460^{\circ}C$, the activation energy for CO oxidation is 10.10∼11.30Kcal/mol. From the agreement between the kinetic data and conductivity measurements, the reaction mechanism is suggested. Especially from the effect of Cd doping, the fact that catalytic activity of ${\alpha}-Fe_2O_3$ is due to the excitation of electrons which are traped on oxygen vacancy is found, and the adsorption sites for reactant molecules are found.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.159-166
• /
• 1999

In this paper, we examined noise figure and the 3rd order intercept point in sensitivity single tone desensitization, and response attenuation by intermodulation spurious of receiver and also analyzed them through simulation based on J-STD-0.18, which is the minimum specification of PCS mobile station. The result of simulation was as follows ; In sensitivity specification, the total noise figure was 5.99dB and the 3rd order intercept point was -33.979dB. Ins ingle tone desensitization and intermodulation spurious response attenuation specification, the total noise figure was 6.375dB and the 3rd order intercept point was -26.99dBm. When there is an interference tone, the nosie figure and the 3rd order intercept point have been increasedly 0.367dB respectively, compared wit that of no interference tone. Because the amount of increase in the 3rd order intercept point was highly raised more than that of noise figure, mixer, closely related to interference tone should be specified in high 3rd order intercept point. At a frequency spacing of 1.25MHz and 2.05MHz from center frequency in IF SAW filter, attenuation should be more than 45dB.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.3 s.43
• /
• pp.33-42
• /
• 2005

Frequency domain Volterra model is applied to nonlinear parameter identification procedure for dynamic systems modeled by nonlinear function. The frequency domain Volterra kernels, which correspond io linear, quadratic, and cubic transfer functions in lime domain, are incorporated in nonlinear parametric identification procedure. The nonlinear transfer functions, which can be derived from the Volterra series representation of the nonlinear differential equation of the system by Schetzen's method(1980), are directly used for modeling input output relation. The error is defined by the difference between the observed output and the estimated output which is calculated by substituting the observed input to nonlinear frequency domain model. The system parameters are searched by minimizing the error. Volterra model guarantees enough accuracy and convergence and the estimated coefficients have a good agreement with their actual values not only in the linear frequency region but also in the legion where the $2^{nd}\;or\;3^{rd}$ order nonlinearity is dominant.

• Journal of Hydrogen and New Energy
• /
• v.15 no.1
• /
• pp.23-31
• /
• 2004

For the fabrication of high efficient bifunctional electrocatalyst of oxygen electrode for PEM URFC (Polymer Electrolyte Membrane Unitized Regenerative Fuel Cell), which is a promising energy storage and conversion system using hydrogen as the energy medium, several bifunctional electrocatalysts were prepared and tested in a single cell URFC system. The catalysts for oxygen electrode revealed fuel cell performance in the order of Pt black > PtIr > PtRuOx > PtRu ~ PtRuIr > PtIrOx, whereas water electrolysis performance in the order of PtIr ~ PtIrOx > PtRu > PtRuIr > PtRuOx ~ Pt black. Considering both reaction modes PtIr was the most effective elctrocatalyst for oxygen electrode of present PEM URFC system. In addition, the water electrolysis performance was significantly improved when Ir or IrOx was added to Pt black just 1 wt.% without the decrease of fuel cell performance. Based on the catalyst screening and the optimization of catalyst composition and loading, the optimum catalyst electrodes for PEM URFC were $1.0mg/cm^2$ of Pt black as hydrogen electrode and $2.0mg/cm^2$ of PtIr (99:1) as oxygen electrode.

• Journal of Agricultural Extension & Community Development
• /
• v.8 no.1
• /
• pp.133-142
• /
• 2001

The objectives of this study were 1) to review the current status of cooperative extension services in Japan, and 2) to draw implications for improving Korean agricultural extension system. Faced with various problems since its localization of extension services in 1997, Korean agricultural extension needs to be improved and strengthened in order to continually achieve the national goals of food production, balanced national development and preservation of environment, at the same time to meet increasing needs of farmers. The results of the study revealed the major characteristics of agricultural extension services in Japan as follows; 1) Each agricultural extension centers were administratively and technically coordinated by the prefectural (provincial) government, 2) There were 11 public corporations with agricultural extension functions under the MAFF(Ministry of Agricultural Forestry and Fisheries) financed by government subsidies 3) Agricultural experiment stations at provincial level were responsible for developing agricultural innovations for farmers' adoption, 4) The functions and operation of the agricultural extension centers were independent from the local agricultural administration. Some of the implications drawn from the study were as follows; 1) In order to accomplish major objectives of agricultural extension services in Korea legal status of agricultural extension centers should be changed from city/county to provincial government, 2) It would be desirable to establish public corporations concerned with agricultural extension under the Rural Development Administration, 3) Provincial Rural Development Administration should be reinforced in terms of applied farming research and diffusion of new technology, 4) Agricultural extension centers should be independent from administrative function and be separated from administration at the city/county level.