• Journal of Power System Engineering
• /
• v.2 no.1
• /
• pp.25-30
• /
• 1998

In order to investigate the droplet size distribution and Sauter Mean Diameter in a ultra high pressure diesel spray, fuel was injected with ultra high pressure into the environments of high pressure and room temperature by an Electronic Hydraulic Fuel Injection System. Droplet size was measured with the immersion liquid sampling technique. The immersion liquid was used a mixture of water-methycellulose solution and ethanol. The Sauter Mean Diameter decreased with increasing injection pressure, with a decrease environmental pressure (back pressure) and nozzle diameter. Increasing the injection pressure makes the fuel density distribution of the spray more homogeneous. An empirical correlation was developed among injection pressure, air density, nozzle diameter and the Sauter Mean Diameter of spray droplets.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.2
• /
• pp.133-139
• /
• 2001

The nonlinear response statistics of an spring-pendulum system with internal resonance under narrow band random excitation is investigated analytically- The center frequency of the filtered excitation is selected to be close to natural frequency of directly excited spring mode. The Fokker-Planck equations is used to generate a general first-order differential equation in the dynamic moment of response coordinates. By means of the Gaussian closure method the dynamic moment equations for the random responses of the system are reduced to a system of autonomous ordinary differential equations. The nonlinear phenomena, such as jump and multiple solutions, under narrow band random excitation were found by Gaussian closure method.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.10 no.1
• /
• pp.137-151
• /
• 2008

This research was conducted to suggest a policy plan for intensive major course in recurrent education system of KNAC. A survey was answered by students, graduates, field professors and (full-time) professors. The results are summarized as follows; 1. In the item of educational operation system, there were some differences in preference among 4 examinee groups. Students preferred 'semester system', graduates and field professors did 'once per week system', and professors 'cyber+centralized training system'. 2. As entering time, students and graduates preferred 'immediately after graduation'. However, field and full-time professors preferred '1 to 3 years after graduation' that became reality. 3. As board and lodging, all examinee groups wanted 'dormitory in college'. Students and graduates were open to pay educational expenses as a level of national colleges. 4. As a curriculum, the most preferred subject by all groups was 'major field technique', which was followed by 'marketing/sale' and 'farm management' in the order of preference.

• Journal of Biosystems Engineering
• /
• v.26 no.3
• /
• pp.271-278
• /
• 2001

Many workers in the garlic peeling factory are separating the sound peeled garlics from the unpeeled and defective ones in a manual way. In order to reduce the seasonal labor requirement and operating cost, the mechanized garlic sorting system such as the vision-based garlic sorter should be developed. This study was conducted as one of basic studies on developing quality evaluation technique for peeled garlics, especially to developed the system for acquiring the whole surface images of garlics with a CCD camera. The following results were obtained from this study. 1. The belt-type garlic rotation system was devised to apply for the vision-based garlic sorter and was tested to decide the criteria of design and optimum conveying speed. 2. To evaluate the performance of the developed garlic rotation system, feeding rate and rotating rate were measured under the conditions of four experimental factors such as the inclined angle of rotating belt, the inclined angle of feeding belt, the height of plate arrays on feeding belt and the conveying speed of belts. And the capacity of the system according to mixture ratios of peeled garlics and unpeeled garlics was analyzed as a feasibility test. 3. For the inclined angle of rotating belt 20°and height of plate array on feeding belt 22㎜, the maximum rotating rate for garlic samples including unpeeled ones was 81.1% at the conveying speed of 4.2 garlic/sec. And under these condition, the maximum feeding rate was 85% at the inclined angle of feeding belt 6.5°. 4. The capacity of the developed garlic rotation system was almost constant regardless of mixture ratio of peeled garlics and unpeeled garlics and its range was 2.95∼3.92 garlic/sec. At the conveying speed of 4.2 garlic/sec, the capacity of the garlic rotation system was calculated ad 58∼64 kg/hr. 5. To improve performance of the garlic rotation system, it is recommended to develop a device to slide garlics into feeding belt.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.7-7
• /
• 2000

A high $T_c$ SQUID system is developed for the application to biological immunoassay. In this application, magnetic nanoparticles are used as magnetic markers to perform immunoassay, i.e., to detect binding reaction between an antigen and its antibody. The antibody is labeled with ${\gamma}-Fe_2O_3\;(or\;Fe_3O_4)$ nanoparticles, and the binding reaction can be magnetically detected by measuring the magnetic field from the nanoparticles. Design and set up of the system is described. The system consists of (1) SQUID magnetometer or gradiometer made of 30-deg. bicrystal junctions, (2) field and compensation coils to apply the magnetic field of about 1 mT, (3) special Dewar to realize a 2 mm-distance between the SQUID and the sample, (4) two layers of cylindrical shielding to reduce the extemal magnetic noise to about 1/100, and (5) an electric slider to move the sample with a speed of 10 mm/sec. The sensitivity of the system is studied in terms of detectable magnetic flux. For the measurement bandwidth from 0.2 Hz to 10 Hz, minimum-detectable amplitude of the magnetic flux is $0.8\;m\;{\Phi}_o$ and $0.25\;m{\Phi}_o$ for the magnetometer and the gradiometer, respectively, when the magnetic field of 1 mT is applied. The difference between them is due to the residual environmental noise, and the applied magnetic field does not increase the system noise. The corresponding weight of the magnetic markers is 1 ng and 310 pg, respectively. An experiment is also conducted to measure antigen-antibody reaction with the present system. It is shown that the sensitivity of the present system is 10 times better than that of the conventional method using an optical marker. A one order of magnitude improvement of sensitivity will be realized by the sophistication of the present system.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.2
• /
• pp.389-396
• /
• 2012

Objective: The aim of this study is to design an auto showering system regarding bed type for old people or bedridden patients. Background: The rapid growth concerning the aging population leads to an increase in elderly bedridden patients living in senior care centers and hospitals where care givers have difficulty bathing older people with limited mobility. Method: In this study, a showering equipment for experiment was based on anthropometric and researching existing products. The nozzle position was optimized by showering tests and simulations using showering equipment. Results: The problems regarding the existing products were analyzed and the nozzle position was optimized through showering tests. The number, position, and spraying angle of the nozzle were optimized through showering simulations. The automatic showering system concerning bed type was designed by considering their results. Conclusion: When designing an automatic showering system, the most important design element involves determining the position of nozzle and angle of water injection and the number of nozzles. The system was developed by applying the results through user centered-research. Application: The user centered-research for developing products was applied directly in order to develop automatic baths, showering products etc. Furthermore, it was also available to be applied towards senior friendly products.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.2
• /
• pp.57-65
• /
• 2019

The weapon system applies the rule that the system engineering procedure must be applied at the acquisition stage. Naval ships, which are one of the important naval weapon systems, take a long period of time to acquire, and the leadership must be commissioned. Therefore, in order to acquire a naval ship, high risk management is necessary, and it is necessary to promote business success through effective application of system engineering which is a scientific management method. However, in the case of naval ships, there are no specific procedures and methods for applying the system engineering. Therefore, research on application method of system engineering which can be easily used by person in charge is necessary. This should have a simple approach to ensure effective business performance by systematically refining and simplifying existing works. QFD (Quality Function Deployment) is a way to improve product satisfaction, impress customers, reduce defective products, reduce design errors, and reduce costs. This systematically develops these mutual relationships by converting the needs of customers into quality characteristics of products and defining them as the design quality of products considering the functions, quality, and process elements of parts. The purpose of this research is to present concrete methodology at the practical level using QFD in a way to ensure traceability of requirements which is an important element of system engineering.

• Korean Medical Education Review
• /
• v.19 no.2
• /
• pp.63-69
• /
• 2017

Resident training programs in South Korea lag far behind that of advanced countries. Given the problems the current system in South Korea has, it is time to consider a new resident training system, resident training for general competencies. Training for the general competencies was practiced in medical fields in advanced countries such as the USA, Canada, and the UK as early as 20 years ago. This system has rendered itself a key component of resident training. Although a few theoretical procedures on general competencies have been practiced in South Korea, the awareness of this concept is still very weak, and the application of the theory to actual training is a long way off from becoming effective. It is urgent for South Korea to adopt competency- and outcome-based training for general competencies. To this end, the knowledge of the concept of this type of training should be improved. Also, the system should be carefully designed to cover a doctor's whole career, and be applied immediately. The competency- and outcome-based training for general competencies is a system that assures high level qualifications. It reflects the needs of our society under the recognition that a professional organization should be committed and accountable in order to respond to social demands. As the benefits of the new training system reach the public and medical care consumers, training-related expenses should be borne by social costs.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.4
• /
• pp.415-424
• /
• 2004

Cooling the electronic equipment is one of the major focal points of the design process and the key to successful product launch. The two-phase loop thermosyphone which is a good candidate among many available options was investigated fur cooling of the high power amplifiers. The system is composed of evaporator which contains 6 parallel cold plates, fan cooled condenser, gas-liquid separator, and interconnecting tubes. Experiments were performed for several refrigerant charging values, hs and as a experiment result, the optimum charging value fur this system was proposed. In order to optimize the system design, the operating cycle pressure and inlet/outlet temperatures of evaporator and condenser are measured and analyzed. The effect of the three parameters such as flow rate and temperature of condenser cooling air, and thermal load on the evaporator are investigated. The lower the operating pressure and the cycle temperatures are also better to prevent the leakage of the system. The system invesigated in this paper can be directly used for cooling of a real unmanned wireless communication station.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.455-468
• /
• 2014

This paper presents seamless hand off implementation suggesting algorithm and Measuring /testing at the tunnel environment in order to derive the ideal value of wireless data transmission in RF-CBTC train control system modeled by Shinbundang Operation System. In addition, it proposes the ideal value(-57dB) for reducing the re-transmission or frequency interference rate and demonstrates frequency optimization which enables highly reliable data communication in Train control system using wireless communications. Based on these result, Shinbundang phase 2 plan to apply to this system.