• Journal of Korea Port Economic Association
• /
• v.28 no.1
• /
• pp.25-52
• /
• 2012

In order to solve the current problems and inefficiencies within the Port Authorities(PA) in Korea, this study introduces the concept of the integration of PA and analyses the intention of integration. This study is based on analysing the surveys participated by the members of PA. The surveys consist of six main factors which could influence the intention of integration of PA; contribution, autonomy, strategic factor, financial factor, marketing factor and environmental factor. The two main implications from this study can be categorised as follows. First, this study identifies the structural problems such as regional self-centredness of PA, obscurity of organisations' roles and their rights, limitations on diversification of business and restrictions within PA. Second, this study extensively discusses the option of improving the inefficiency whilst maintaining the current system or to switch to the integration of PA. In addition, it has been found that individual PA recognise the little need for integration. Since the results show that the strategic, financial, marketing and environmental factors would cause both significant and little significant impacts, it would be too haste to decide on a conclusion. However, it is possible to say that the rapid integration of PA can neither improve the efficiency nor improve the characteristics of each region. Therefore, the significance of integration of PA must be further discussed from many different perspectives. The results of this research will serve as a basic literature for further studies on the integration of PA in Korea. Moreover, the problems that have been identified and analysed in this study will contribute to establishing the strategy for further development of PA in Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.3
• /
• pp.207-212
• /
• 2007

This paper aims to measure and evaluate the technical efficiency with two inputs and four outputs with the use of fuzzy DEA in Korean RCC/RSC. Especially, this paper included not only the marine accident data which occurred for the analysis in particular but also the possibility data of a potential marine accident by an Environmental Stress value and analyzed the technical efficiency. And in this paper, asymmetrical triangular fuzzy number is presented about inputs/ outputs data and a procedure is suggested for it's solution. The basic idea is to transform the fuzzy CCR model into a crisp linear programming problem by applying an alternative ${\alpha}$-cut approach. Also this paper propose a ranking method for fuzzy RCC/RSC using presented fuzzy DEA approach. The result, when ${\alpha}$-cut is 0.5, efficiency priority is found in the order of YS, BS, MP, TY, JJ, PH, US, IC, SC, DH, GS, TA, WD RCC/RSC. Finally, Inefficiency TA, WD RCC/RSC have to benchmarking with reference sets.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.2
• /
• pp.201-207
• /
• 2010

Recently, about 600 cases of marine accidents occur annually in Korea. According to many studies and analyses on occurrence of marine accidents, 70~80% of marine accidents were caused by human factors. Among the human factors, navigation officers' fatigue is very important factor. Although navigation officers' fatigue serves as an important role in marine accidents, there is no method to exactly examine the degree of officers' fatigue. Accordingly, this study analyzed human factors according to types of marine accidents and extracted important five factors affecting navigation officers' fatigue through the questionnaire survey by means of literatures and 5-point scale. In addition, evaluation factors of marine accident risks caused by fatigue factors were divided and structured by using ISM. Lastly, it found out the importance of each fatigue factor drawn by AHP and decided marine accidents that were most highly caused by navigation officers' fatigue in order. At the result, weights were high as sleep time 0.385, stress 0.302, health condition 0.139, rest time 0.099, alcohol and drug 0.074 in fatigue factors, and death and injury 0.328, collision 0.308, grounding 0.195, sinking 0.094, fire accident 0.075 in evaluation factors of marine accident risks. Therefore, the control plan to lower marine accident risks should be prepared on the basis of high weight factors.

• Nuclear Engineering and Technology
• /
• v.45 no.5
• /
• pp.605-612
• /
• 2013

Removal of decay heat from an operating reactor during a prolonged station blackout condition is a big concern for reactor designers, especially after the recent Fukushima accident. In the case of a prolonged station blackout condition, heat removal is possible only by passive means since no pumps or active systems are available. Keeping this in mind, the AHWR has been designed with many passive safety features. One of them is a passive means of removing decay heat with the help of Isolation Condensers (ICs) which are submerged in a big water pool called the Gravity Driven Water Pool (GDWP). The ICs have many tubes in which the steam, generated by the reactor core due to the decay heat, flows and condenses by rejecting the heat into the water pool. After condensation, the condensate falls back into the steam drum of the reactor. The GDWP tank holds a large amount of water, about 8000 $m^3$, which is located at a higher elevation than the steam drum of the reactor in order to promote natural circulation. Due to the recent Fukushima type accidents, it has been a concern to understand and evaluate the capability of the ICs to remove decay heat for a prolonged period without escalating fuel sheath temperature. In view of this, an analysis has been performed for decay heat removal characteristics over several days of an AHWR by ICs. The computer code RELAP5/MOD3.2 was used for this purpose. Results indicate that the ICs can remove the decay heat for more than 10 days without causing any bulk boiling in the GDWP. After that, decay heat can be removed for more than 40 days by boiling off the pool inventory. The pressure inside the containment does not exceed the design pressure even after 10 days by condensation of steam generated from the GDWP on the walls of containment and on the Passive Containment Cooling System (PCCS) tubes. If venting is carried out after this period, the decay heat can be removed for more than 50 days without exceeding the design limits.

• Journal of the East Asian Society of Dietary Life
• /
• v.12 no.1
• /
• pp.38-46
• /
• 2002

This study was carried out in order to investigate dextran formation and internal structure during fermentation of the oligosaccharide Jeung-Pyun. The dextran and sugar reducing contents of Jeung-Pyun batter and the specific volume and the internal structure of Jeung-Pyun were analyzed as a function of fermentation time. The specific volume of Jeung-Pyun peaked at the 7th hour of fermentation. The dextran content of Jeung-Pyun batters peaked at the 7~13th hour of fermentation, and Fructooligosaccharide Jeung-Pyun had the least peak value. Reducing sugar content of Jeung-Pyun batters slowly decreased as fermentation progressed. From the air pore size and distribution of Jeung-Pyun observed by SEM, the sucrose Jeung-Pyun fermented for 3~7 hours and oligosaccharide one fermented for 7 hours were judged as the best. It was concluded that dextran may be formed by fermentation of oligosaccharides as well as sucrose and dextran has a significant role on the volume expansion of Jeung-Pyun.

• Membrane Journal
• /
• v.12 no.2
• /
• pp.97-106
• /
• 2002

Small angle light scattering (SALS) and field emission scanning electron microscope (FE-SEM) have been used to investigate the light scattering patterns with time evolved during water vapor quenching (relative humidity of 53 (${\pm}3)%$ at $26^{\circ}C$ of polysulfone (PSf)/NMP/Alcohol and chlorinated poly(vinyl chloride) (CPVC)/THF/Alcohol, respective1y. Time dependence of the position of the light scattering maximum was observed at PSf dope solutions, confirming spinodal decomposition (SD), while CPVC dope solutions showed a decreased scattered light intensity with an increased q-value, indicating nucleation & growth (NG). For the each system, domain growth rate in the intermediate and late stage of phase separation decreased with increasing the number of carbon of alcohol used as additive (non-solvent). Also, in the early stage for SD, the scattering intensity with time was in accordance with Cahn's linear theory of spinodal decomposition, regardless of types of non-solvent additive. Also, the size scales obtained by SALS were mutually compared to domain sizes gained by FE-SEM measurement. These observations of scattering pattern were much clearly observed for the 20PSf/70NMP/10n-butanol (w/w%) and agreed with the theoretical predictions for scattering patterns of each stage like the early, the intermediate, and the late stage of SD type phase separation. As the scattering maximum was observed at the larger angles (larger q) in the order of n-butanol > n-propanol > methanol > no alcohol, the pore size of final morphology decreased.

• Korean Journal of Plant Resources
• /
• v.19 no.5
• /
• pp.634-639
• /
• 2006

In order to develop a disease-resistant root stock for the growth of watermelon, an efficient regeneration system of the gourd(Lagenaria leucantha Duch.) inbred line GO701-2 via organogenesis was established in this experiment. Using proximal parts of cotyledon explant excised from germinated seedling in vitro, maximum adventitious shoot formation (39%) was achieved on MS medium where cytokinin (BA) and auxin (IAA) were added at a concentration of 3mg/L and 0.1mg/L, respectively. Roots of the elongated shoots were successfully formed on MS medium without adding any plant growth regulators. The cucumber CsGolS1 gene known as a resistance gene against biotic and abiotic stresses, was constructed into the binary vector pBI121 under the control of CaMV 35S promoter. When the gene was introduced into the genome of gourd by Agrobacterium-mediated transformation, putative transgenic plants were obtained with the transformation efficiency of approximately 20 percent.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.168-177
• /
• 2011

The combustion test for real box of AC outdoor unit has been performed in this study in order to estimate the fire hazard in multi-system type of AC outdoor unit which is currently used for commercial use. The result showed that in test, there was explosion inside of AC outdoor unit, and flame erupted and fire spread through upper side grill. And then this fire burnt the combustibles such as wires, electronic control board, heat exchange copper plate and plastics etc inside the unit, refrigerant gas pipe was burst due to fire, and accelerated the explosion and flame eruption to outside while the refrigerant was erupting. It is found in this test that the maximum heat release rate of AC outdoor unit is 5,830 kW, the maximum internal temperature measured with infrared camera and thermocouple is $1,201^{\circ}C$, maximum ambient temperature is $881^{\circ}C$, and flame rose higher than about 5 m. It is concluded that the fire in AC outdoor unit cause fire to combustibles around the unit, and may give big damage by generating the secondary fire. It is expected that the result obtained from the test on the real object may be applied to fire realization of AC outdoor unit and estimation of fire spreading to the combustibles around in the future computer simulation.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.155-165
• /
• 2012

In any military services, young leaders are superiors to another and the leaders must be equipped with not only command and control(C2) and management capabilities but with a skill set that addresses their service members' problems and hardships throughout a counseling approach. These young leaders other than regular professional counselors are wearing dual hats as a commander and a counselor to address their service member's issues. There are couple of hours to give a lecture about counseling during the basic training course, however, we noticed that there are some limitations to cover up the uniqueness of counseling during the course, since we cannot rule out the unique vertical situation within military system that runs by its hierarchy. Therefore, we developed education program in order to enhance commander's counseling skills, refined the program with thorough review and commentary by professions and military commanders, and provided 10 events of program to the young leaders. As a result, the leaders scored high on self-effectiveness, communication skills, and counseling development-level. If we adjust minor changes to the program, it will be the outstanding program to improve young leaders' counseling capability.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1998.10a
• /
• pp.83-92
• /
• 1998

오존 경보제와 예보제의 실시가 오존 오염에 관한 일반인의 관심을 증폭시키는 중요한 계기가 되었음에도 우리 연구계와 정책 당국의 대응은 이에 훨씬 못미치고 있다. 1990년 이래 학회지 관련 논문 편수는 연간 1∼3편에 그치고 있고, 다른 이차오염 현상과 달리 정책 당국은 여전히 지원을 고려하지 않고 있다. 오존 연구가 뿌리를 내리지 못한 가운데 강행된 경보제와 예보제의 와중에 책임을 떠맡은 지방자치단체는 조급하게 노련한 예보 모델을 찾고 있고 충분한 검토도 없이 외국의 사례에서 대책을 구하고 있다. 논란이 되고 있는 오존 예보의 부정확성은 모델 선택의 문제가 아니라 모델 이용이 잘못된 때문이다. 현재 오존 대책의 일환으로 검토되고 있는 차량 부제 실시와 같은 단기 대책은 역효과를 낼 수 있다는 연구결과도 있다. 선진국의 오존 연구는 도시 규모에서 지역 규모로 확대되고 있고, 구츰 등 액상반응의 효과 규명과 1 kin 이하 미세 변화 모델링이 시도되고 있고, 지구 단위 대류권 실험의 일환으로 태평양 상공의 오존과 오존 전구물질의 대기화학이 조사되고 있다. 우리는 우선 우리의 오존 문제를 정확히 이해하도록 노력하여야 한다 합리적 계획 아래 체계적으로 접근하여 갈 때 당장은 아니지만 우리의 오존에 대한 이해가 깊어갈수록 예보의 정확성은 향상될 수 있다. 많은 비용과 노력이 필요한 오존 대책의 시행은 충분히 신중하여야 한다. 서울과 같은 대도시라면 적합한 수치모델을 구비하여 효과를 점검할 수 있어야 한다. 일부에서는 예보의 정확성을 높일 수 있는 방안의 하나로 수치모델 이용을 거론하고 있으나 수치모델은 매일의 예보와 같이 일상적 목적을 위하여 사용될 수 있는 모델이 아니며, 현재와 같이 기초가 갖추어져 있지 않은 상황에서는 더욱 그러하다. 정상적 모델 이용이 가능할 수 있도록 배출원 자료 체계를 갖추어야 하고, 서을 등 특징적 지역에 대하여서는 집중적 현장 조사를 실시하여야 한다.3)와 NAS(National Academy of Sciences, 1983), 미국에서 발행되는 정부 지침서 (Federal Register)에 고시된 내용 등을 토대로 하였다. 연구는 당면현실로 다가온 정보화 및 세계화의 기업환경에서 예견되는 몰입(committment)의 약화에 대한 치유방안으로서, 정보화된 경영모의게임의 기업 교육훈련 시스템(Business Training System)으로의 발전 가능성을 제시한다 하겠다.암시하며, 따라서 우리 교육문화에 맞는 재택수업 형태의 개발이 시급함을 제시한다고 하겠다.column density of HCaN is (1-3):n1014cm-2. Column density at distant position from MD5 is larger than that in the (:entral region. We have deduced that this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$과 $\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로 더욱이 공간