• Journal of Korean Society of Forest Science
• /
• v.106 no.2
• /
• pp.267-273
• /
• 2017

This study was conducted to construct a empirical yield table for Pinus densiflora in real forest. Since existing normal yield tables have been derived by studying and analyzing communities in ideal environment for tree growth, those tables provide more over-estimated values than ones from real forest. Because of this, there are some difficulties to apply the tables to empirical forest except for normal forest. In this study, therefore, we estimated stand growth for real forest on P. densiflora as the representative species of conifers. We used 1,957 sample plot data of P. densiflora in central Korea from National Forest Inventory (NFI) system, and analyzed through estimation, recovery and prediction in order by using Weibull function as a diameter distribution model. Weilbull and Schumacher models were applied for estimating mean DBH and mean basel area and it was found that the site index for P. densiflora in central Korea ranges from 8 to 14 at reference age 30. According to site 12 in the stand yield table, the Mean Annual Increment (MAI) of P. densiflora was $4.42m^3/ha$ at 30 years of age. Compared to existing volume table constructed before, it is showed that MAI of this study were lower. According to the paired t-test that is conducted with the gap of volume values between normal forest and real forest by site index and age, the P-value was less than 0.001 which is recognized to have a statistically significant difference. Based on the results in this study, it is considered to be helpful for practical management and management policy on P. densiflora in central Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.875-888
• /
• 2013

The researches have recently progressed toward the use of the superelastic shape memory alloys (SMAs) to develop new smart control systems that reduce permanent deformation occurring due to severe earthquake events and that automatically recover original configuration. The superelastic SMA materials are unique metallic alloys that can return to undeformed shape without additional heat treatments only after the removal of applied loads. Once the superelastic SMA materials are thus installed at the place where large deformations are likely to intensively occur, the structural system can make the best use of recentering capabilities. Therefore, this study is intended to propose new buckling-restrained braced frames (BRBFs) with superelastic SMA bracing systems. In order to verify the performance of such bracing systems, 6-story braced frame buildings were designed in accordance with the current design specifications and then nonlinear dynamic analyses were performed at 2D frame model by using seismic hazard ground motions. Based on the analysis results, BRBFs with innovative SMA bracing systems are compared to those with conventional steel bracing systems in terms of peak and residual inter-story drifts. Finally, the analysis results show that new SMA bracing systems are very effective to reduce the residual inter-story drifts.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.71-83
• /
• 2013

Recently frequencies and scales in natural disasters have been significantly increased and enlarged and that leads to increase interests on preventing disasters. As natural disasters occur, it is difficult to fulfill the scale of natural disasters using ordinary stocks in a local government. Thus, it is necessary to establish a system that commonly uses protection resources according to regional characteristics in order to rapidly implement labor mobilization and equipment distribution based on the damage of natural disasters. In this study, regional characteristics in Korea provinces are analyzed and 'a way of composing a local government consortium for common disaster responses' is proposed. First, a disaster map that represents the amount of damage for each local government published in the disaster yearbook from 2002 to 2011 is produced using GIS. Then, the whole land is divided into five different sections according to administrative regions and that are divided into 12 clusters again based on the geographical and humanistic characteristics and the analysis of the scale of damage in typhoons and heavy rainfalls. Finally, disaster protection base stations for each region are selected. The data of analyzing disaster damages may be used as a reference material for establishing disaster prevention plans.

• Korean Journal of Cognitive Science
• /
• v.7 no.1
• /
• pp.57-74
• /
• 1996

This paper presents a comparison of recognition performance of the features used inthe recent handwritten korean character recognition.This research aims at providing the basis for feature selecion in order to improve not only the recognition rate but also the efficiency of recognition system.For the comparison of feature performace,we analyzed the characteristics of theose features and then,classified them into three rypes:global feature(image transformation)type,statistical feature type,and local/ topological feature type.For each type,we selected four or five features which seem more suitable to represent the characteristics of korean alphabet,and performed recongition experiments for the first consonant,horizontal vowel,and vertical vowel of a korean character, respectively.The classifier used in our experiments is a multi-layered perceptron with one hidden layer which is trained with backpropagation algorithm.The training and test data in the experiment are taken from 30sets of PE92. Experimental results show that 1)local/topological features outperform the other two type features in terms of recognition rates 2)mesh and projection features in statical feature type,walsh and DCT features in global feature type,and gradient and concavity features in local/topological feature type outperform the others in each type, respectively.

• Journal of Oral Medicine and Pain
• /
• v.32 no.4
• /
• pp.383-396
• /
• 2007

The aim of this study was to measure the suprathreshold taste intensity for NaCl, sucrose, citric acid, and quinine HCl in elderly Korean women using a whole-mouth, sip-and-spit procedure, employing the method of magnitude matching. The results were analysed in terms of aging, menopause, and salivary flow rate. 31 elderly women (mean age; $50.8{\pm}5.1$ years) and 30 young women (mean age; $25.1{\pm}1.71$ years) were included for the study. Subjects were instructed to give nonmodulus magnitude estimates to the intensities of five concentrations each of sucrose, NaCl, citric acid, and quinine HCl; distilled water; 6 loudness level of a 1,000-Hz tone, using the same 9-point intensity scale. Each of the 21 taste stimuli and 6 auditory stimuli are presented in random order twice. The auditory function is used to assess the absolute intensity function of the subject's taste system. The results were as follows; 1. Comparing to young women, elderly women showed decreased taste intensities for lower concentration solutions of NaCl and sucrose. However, other solutions didn't show any difference in taste intensities between young and elderly women. 2. There were not significant difference in perceived taste intensities for NaCl, sucrose, citric acid, and quinine HCl between menopause and pre-menopause women in elderly women group. 3. There were not significant difference in perceived taste intensities for NaCl, sucrose, and quinine HCl between low salivation women and high salivation women in elderly women group. 4. The low salivation women in elderly group showed higher taste intensity for low concentration citric acid than high salivation women.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.6
• /
• pp.453-457
• /
• 2016

In various industrial plants such as power generation plants, petrochemical plants, and unit factories, there is an increasing demand for a system that generates hot water using waste or surplus steam. Compact steam unit (CSU), which produces hot water by using steam, is a good solution considering energy reuse. In this study, as a basic study to develop a high-pressure CSU, heat transfer characteristics of a hybrid heat exchanger were investigated through experiments, in order to use the hybrid heat exchanger instead of a conventional plate heat exchanger as the core component of CSU. The experimental results are the followings. Heat balance between the hot side and cold side was satisfied within ${\pm}5%$. Overall heat transfer coefficient increased linearly as the Reynolds number increased and exceeded $5,524W/m^2K$ when the flow velocity was above 0.5 m/s. In addition, pressure drop also increased as the Reynolds number increased, and pressure drop per unit length was below 50 kPa/m.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.79-90
• /
• 2017

Urban environment represent one of the most dynamic regions on earth. As in other countries, forests, green areas, agricultural lands are rapidly changing into residential or industrial areas in South Korea. Monitoring such rapid changes in land use requires rapid data acquisition, and satellite imagery can be an effective method to this demand. In general, SAR(Synthetic Aperture Radar) satellites acquire images with an active system, so the brightness of the image is determined by the surface roughness. Therefore, the water areas appears dark due to low reflection intensity, In the residential area where the artificial structures are distributed, the brightness value is higher than other areas due to the strong reflection intensity. If we use these characteristics of SAR images, settlement areas can be extracted efficiently. In this study, extraction of settlement areas was performed using TerraSAR-X of German high-resolution X-band SAR satellite and KOMPSAT-5 of South Korea, and object-oriented image classification method using the image segmentation technique is applied for extraction. In addition, to improve the accuracy of image segmentation, the speckle divergence was first calculated to adjust the reflection intensity of settlement areas. In order to evaluate the accuracy of the two satellite images, settlement areas are classified by applying a pixel-based K-means image classification method. As a result, in the case of TerraSAR-X, the accuracy of the object-oriented image classification technique was 88.5%, that of the pixel-based image classification was 75.9%, and that of KOMPSAT-5 was 87.3% and 74.4%, respectively.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.130-138
• /
• 2020

As of 2017, the sewerage penetration rate of Seoul and metropolitan cities is more than 90%, and the number of domestic sewage treatment plants increased by 25% from 3,064 in 2010 to 4,072 in 2017. Among them, sewage treatment plant operated by SBR system is 585, which is 17% higher than 2010. In order to improve the water quality of the water source and improve the operation of the small sewage facilities, the improvement of the process was studied by applying the modelling to 49 facilities of the sewage treatment plant in Andong Imha dam area with more than 500㎥/day 3 places and 46 places less than 500㎥/day. As an improvement plan for modelling, candidate data were derived by reviewing operation data for 5 years. 49 facilities are operated by 12 types of operating processes. Among them, 1 place mort than 500㎥/day with SBR method and 9 facilities with less than 500㎥/day were selected by dividing 46 sites into 3 types. As a result of applying modelling to more than 500㎥/day, it was possible to improve the quality of discharged water through SRT control and it was found that applying model to sites of small scale treatment plants can improve the removal efficiency of TP by up to 14.4%. As a result, the data of this study could be used to improve and improve the operation of sewage treatment plants and RCSTP(Rural Community Sewage Tratment Plant).

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.260-269
• /
• 2002

The fire resistance of particulate polypropylene composite systems were investigated by using various reinforced particles such as zeolite, talc, $CaCO_3$ particles. In this study, The effect of particle size on the thermal properties of composite and the effect of reinforced particles on the fire resistance were studied. The inorganic reinforced particles used in this study were recycled zeolite(average particle diameter=85.34 $mu extrm{m}$), $CaCO_3$ (33.93 $mu extrm{m}$), and talc (18.51 $mu extrm{m}$). The fire resistance of composite systems was thoroughly examined by measuring limited oxygen index (LOI, ASTM D2863) and cone calorimetry (ASTM E1354, ISO 5660). Thermal stability of composite systems was thoroughly examined by measuring TGA. The flame retardants (DBDPO) and reinforced particles reduce the maximum heat release rate (M-HRR) in the order of Talc > $CaCO_3$ > recycled Zeolite. Comparing the cone calorimetry experimental results of the particle reinforced polymer composite system exhibited twice higher efficiency than DBDPO in polypropylene systems, and the LOI also showed similar trends to the cone calorimetry experiments. The optical and scanning electron microscopy techniques were used to investigate the composites ash layer and the core fracture surfaces in the burning process. The reinforcing inorganic particles seemed to accumulate at the surface of ash layer, and subsequently intercept the oxygen transport and heat transfer into the core area.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.603-612
• /
• 2006

Recently the web service area is rapidly growing as the next generation IT paradigm because of increase of concern about SOA(Services-Oriented Architecture) and growth of B2B market. Since a service discovery through UDDI(Universal Description, Discovery and Integration) is limited to a functional requirement, it is not considered an effect on frequency of service using and reliability of mutual relation. That is, a quality as nonfunctional aspect of web service is regarded as important factor for a success between consumer and provider. Therefore, the web service selection method with considering the quality is necessary. This paper suggests the agent-based quality broker architecture and selection process which helps to find a service providing the optimum quality that the consumer needs in a position of service consumer. A theory of agent is accepted widely and suitable for proposed system architecture in the circumstance of distributed and heterogeneous environment like web service. In this paper, we considered the QoS and CoS in the evaluation process to solve the problem of existing researches related to the web service selection and used PROMETHEE(Preference Ranking Organization MeTHod for Enrichment Evaluations) as an evaluation method which is most suitable for the web service selection among MCDM approaches. PROMETHEE has advantages that solve the problem that a pair-wise comparison should be performed again when comparative services are added or deleted. This paper suggested a case study with the service composition scenario in order to verify the selection process. In this case study, the decision making problem was described on the basis of evaluated values for qualities from a consumer's point of view and the defined service level.