• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.425-433
• /
• 2019

In this paper, the RCS analysis of the 10m unmanned surface vehicles was performed, and the factors of RCS increase were analyzed. Modeling techniques by transforming a geometric shape can reduce the RCS area, which can be used to develop stealth unmanned surface vehicles. In order to reduce the RCS, the existing Top Mast part was moved 1m to the tail part, the 5 degree tilt angle was moved below 0.5 m, and additional guided walls were installed to minimize the influence on the center and surrounding corner reflecting structures. As a result of comparing and analyzing the RCS analysis value with the existing model, it can be seen that the reduced countermeasure model is -3.79 dB lower than the existing model for all elevations. In particular, it can be seen that the strong scattering phenomenon is substantially removed in the region except the sacrificial angle region. In addition, it can be seen that in the case of -5m to 2m where the guide wall is added, the reflected signal is improved up to 20 to 40 dB or more, so that it does not appear on the 2D ISAR image. RCS analysis of unmanned surface vehicles explained the process of analyzing and identifying problem location through distance profile analysis and ISAR image analysis.

• Journal of Life Science
• /
• v.29 no.2
• /
• pp.231-238
• /
• 2019

This study evaluated the antioxidant activity of the extract and fractions of Alnus firma. Alnus firma had the highest total phenolic content ($452.80{\pm}7.01{\mu}g$ gallic acid equivalents/mg) in a methanol (MeOH) fraction and the highest total flavonoid content ($112.29{\pm}11.14{\mu}g$ rutin equivalents/mg) and antioxidant capacity ($936.23{\pm}0.07{\mu}g$ ${\alpha}$-tocopherol equivalents/mg) in an ethylacetate (EA) fraction. The antioxidant activities of various solvent extract fractions of Alnus firma were evaluated using various antioxidant assays, including ${\beta}$-carotene-linoleate assay, reducing power assay, 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging assay, metal chelating activity assay, superoxide anion radical scavenging assay, and lipid peroxidation inhibition assay using the ferric thiocyanate method. These activities were compared with those of ascorbic acid, butylated hydroxyanisole (BHA), gallic acid (GA), butylated hydroxytoluene (BHT), and ${\alpha}$-tocopherol. First, at a $250{\mu}g/ml$ concentration, the EA and MeOH fractions of A. firma showed 92.43% and 89.20% DPPH radical scavenging activity, respectively. Second, $50{\mu}g/ml$ of the EA fraction exhibited 72.49% superoxide anion radical scavenging activity, a little greater than the same dose of GA (60.88%). Finally, 0.5 and 1 mg/ml of the EA fraction showed 73.45% and 73.29% inhibition of peroxidation in the ${\beta}$-carotene-linoleic acid system, respectively. The decreasing order of reducing power was EA fraction > n-butanol (BuOH) fraction > dichloromethane (DCM) fraction > n-hexane (HX) fraction. The results obtained in the present study indicated that Alnus firma can be used as an easily accessible potential source of natural antioxidants.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.129-135
• /
• 2018

In the stretchable electronic devices, the stretchable substrate is a very essential material which determines the stretchability, performances and durability of the stretchable electronic devices. In particular, the current stretchable materials have hysteresis making difficult to used as sensors and other electronic devices. In this study, we developed a PDMS-Ecoflex hybrid stretchable substrate mixed with PDMS and Ecoflex material in order to increase stretchability and improve hysteresis characteristics. Mechanical behavior of the hybrid substrate was evaluated using a tensile test, and optical transmittance of the hybrid substrate was also measured. As the content of Ecoflex increases, the PDMS-Ecoflex hybrid substrate becomes more flexible, and the elastic modulus decreases. In addition, the PDMS substrate failed a tensile strain of 270%, while the PDMS-Ecoflex hybrid substrate did not fail even at 500% strain indicating excellent stretchability. In the repeated tensile test, the hybrid substrate with 2:1 mixing ratio of PDMS and Ecoflex showed hysteresis. On the other hand, in the case of the hybrid substrate with the mixing ratio of 1:1, hysteresis did not occur at a strain of 50% and 100%. Hence, we developed a stretchable substrate with over 150% stretchability and no hysteresis characteristics. The optical transmittance of the Ecoflex substrate was 68.6%, whereas the transmittances of the hybrid substrate with mixing ratio of 2:1 and 1:1 were 78.6% and 75.4%, respectively. These results indicate that the PDMS-Ecoflex hybrid substrate is a potential candidate for a transparent stretchable substrate.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.3
• /
• pp.236-245
• /
• 2021

In this study, a drifting test using a experimental vessel (2,966 tons) in the northern waters of Jeju was carried out for the first time in order to obtain the fundamental data for drift. During the test, it was shown that the average leeway speed and direction by GPS position were 0.362 m/s and 155.54° respectively and the leeway rate for wind speed was 8.80%. The analysis of linear regression modes about leeway speed and direction of the experimental vessel indicated that wind or current (i.e. explanatory variable) had a greater influence upon response variable (e.g. leeway speed or direction) with the speed of the wind and current rather than their directions. On the other hand, the result of multiple regression model analysis was able to predict that the direction was negative, and it was demonstrated that predicted values of leeway speed and direction using an experimental vessel is to be more influential by current than wind while the leeway speed through variance and covariance was positive. In terms of the leeway direction of the experimental vessel, the same result of the leeway speed appeared except for a possibility of the existence of multi-collinearity. Then, it can be interpreted that the explanatory variables were less descriptive in the predicted values of the leeway direction. As a result, the prediction of leeway speed and direction can be demonstrated as following equations. Ŷ₁= 0.4031-0.0032X₁+0.0631X₂-0.0010X₃+0.4110X₄ Ŷ₂= 0.4031-0.6662X₁+27.1955X₂-0.6787X₃-420.4833X₄ However, many drift tests using actual vessels and various drifting objects will provide reasonable estimations, so that they can help search and rescue fishing gears as well.

• Fisheries and Aquatic Sciences
• /
• v.24 no.1
• /
• pp.32-40
• /
• 2021

Monitoring fish movement is important to understand how physiology adapts to environmental change. To explore the applicability of a video tracking system for determining if chemical cues attract or repel aquatic animals, the movement patterns of rock bream, Oplegnathus fasciatus, were analyzed upon exposure to various materials, including extracts of sea urchin, rock worm, bait worm, krill, barley kernel, and commercial fish feed. Pellets were prepared by mixing freeze-dried tissues with a cellulose and corn flour mixture. Behavioral analysis was carried out with five fish that had been acclimated in the adaptation zone of a Y-shaped tank. Preference toward chemical cues was quantified by assessing the frequency rock bream were observed in a discrete zone around the test material located at the end of each arm and the duration each fish stayed in each zone. The analysis of fish movement upon exposure to commercial feed and barley kernel at each end, respectively, indicated a clear preference toward the feed relative to the barley kernel. Movement responses were further tested with pellets containing extracts of sea urchin, one of the species collected on a large scale, and other materials including krill and worms. A stronger preference toward sea urchin (100%) was observed based on the duration of stay in the test zone, compared to krill (90.1 ± 44.2%), bait worm (81.1 ± 39.1%), rock worm (73.7 ± 28.9%), and barley (63.9 ± 25.9%), under the conditions tested. A detailed comparison of rock bream movements toward each material revealed significant differences in frequency and duration, respectively, between pairs of test materials including krill (74 ± 29.8 and 375.6 ± 118.9) vs. rock worm (41.5 ± 18.7 and 160.2 ± 42.6), krill (86.3 ± 22.9 and 477.1 ± 84) vs. bait worm (36.2 ± 5.5 and 166.1 ± 50.7), and rock worm (45.9 ± 26.2 and 213.7 ± 100.1) vs. bait worm (34.6 ± 21.7 and 159.5 ± 98.5). Rock bream exhibited preference for the test materials in the following order: commercial fish feed > sea urchin > krill > rock worm > bait worm > barley. The results suggest a higher potency of sea urchin extract as a rock bream fishing bait compared to the other materials that are used as commercial bait.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.243-249
• /
• 2021

The star tracker detects microscopic star light in space and compares it with a stored list of stars to calculate the satellite's position in the inertial coordinate system. If other light, such as the sun or the earth, enters the optical head, the star cannot be recognized and the star tracker cannot be operated. In particular, strong light such as the sun affects not only operation but also the performance of the star tracker. The sun exclusion angle of the star tracker is one of the important factors determining the performance of the star tracker. This paper performs the verification of the star tracker's sun exclusion angle. In order to verify the sun exclusion angle, we predict the sun exclusion time of the star tracker and compare it to the actual sun exclusion time of the GEO-KOMPSAT-2A star tracker. In addition, the performance of the star tracker is analyzed for normal operations against the sun exclusion in the optical head. It shows that the actual sun exclusion is maintained under the range of 26 degrees, the performance requirement of the star tracker, and the star tracker operates normally in spite of the sun exclusion.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.697-705
• /
• 2020

This paper deals with an analysis of crustal movement for the sourthern part of Korean peninsula using GNSS (Global Navigation Satellite System) data. An earthquake of more than 5.0 occurred in the southeastern region of the Korean Peninsula, and it is necessary to evaluate the risk of earthquakes in various ways.In order to reveal long-term tectonic movement patten in Pohang and Gyeongju provinces, we derived crustal movement parameters related with elastic theory. We used GAMIT/GLOBK for analyzing seven-year interval GNSS data of CORS (Continuously Operating Reference Stations). The azimuth of velocity vectors trended generally about 110° with an mean magnitude of 31mm/yr.The main characteristics of the strain change for seven-year in Korea obtaind from our study. Direction of the principal axis of the maximum compression is ENE-WSW as a whole, through there are some exceptions. The mean rate of the maximum shear strain change is (0.11±0.07)μ/yr, that is approximately one third that of Chubu district, Central Japan. Taking into account our results, the mean rate of maximum shear in southern part of Korean peninsula is considered as reasonable. The mean azimuth of principal strain is about (85.4°±26.8°). There are some exceptions of azimuth because the average azimuth differ from the left and right side in Yangsan fault which are about (73.2°±21.5°) and (105.2°±17.0°) respectively, It is noteworthy that the high seismicity areas in the southern part of Korea peninsula almost coincides with the area of large strain rate. As a conclusion, it could be stated that the our study represents the characteristics of crustal deformation in the southern part of peninsula, and contributes to the researches on earthquake disaster management.

• Applied Chemistry for Engineering
• /
• v.31 no.6
• /
• pp.639-645
• /
• 2020

Among the components of redox flow battery (RFB), the electrode serves as a diffusion layer of an electrolyte and a path for electrons and also is a major component that directly affects the RFB performance. In this paper, chloric/sulfuric mixed acidwas used as a supporting electrolyte in RFB system with Fe2+/Fe3+ and V2+/V3+ as redox couple. The optimum electrode and activation temperature were suggested by comparing the capacity, coulombic efficiency and energy efficiency according to the electrode type and activation temperature. In the RFB single cell evaluation using 5 types of carbon electrodes used in the experiments, all of them showed close to the theoretical capacity to retain the reliability of the evaluation results. GFD4EA showed relatively excellent energy efficiency and charge/discharge capacity. In order to investigate the electrochemical performance according to the activation temperature, GFD4EA electrode was activated by heat treatment at different temperatures of 400, 450, 500, 600 and 700 ℃ under an air atmosphere. Changes in physical properties before and after the activation were observed using electrode mass retention, scanning electron microscope (SEM), XPS analysis, and electrochemical performance was compared by conducting RFB single evaluation using electrodes activated at each temperature given above.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.115-123
• /
• 2021

Pine nuts are Korea's representative nut forest products and profitable crops. However, pine nuts are harvested by climbing the trees themselves, thus the risk is high. In order to solve this problem, it is necessary to harvest pine nuts using a robot or an unmanned aerial vehicle(UAV). In this paper, we propose a deep learning based detection method for harvesting pine nut in UAV aerial images. For this, a video was recorded in a real pine forest using UAV, and a data augmentation technique was used to supplement a small number of data. As the data for 3D detection, Unity3D was used to model the virtual pine nut and the virtual environment, and the labeling was acquired using the 3D transformation method of the coordinate system. Deep learning algorithms for detection of pine nuts distribution area and 2D and 3D detection of pine nuts objects were used DeepLabV3+, YOLOv4, and CenterNet, respectively. As a result of the experiment, the detection rate of pine nuts distribution area was 82.15%, the 2D detection rate was 86.93%, and the 3D detection rate was 59.45%.

• Journal of Internet of Things and Convergence
• /
• v.8 no.2
• /
• pp.41-48
• /
• 2022

This study tried to empirically explore which issues related to the social service agency for public(as below SSA), that is, social perceptions were formed, by using mess media related to the SSA. This study is meaningful in that it identifies the overall social perception and trend of SSA through public opinion. In order to extract media trend data, the search used the big data analysis system, Textom, to collect data from the representative portals Naver News and Daum News. The collected texts were 1,299 in 2020 and 1,410 in 2021, for a total of 2,709. As a result of the analysis, first, the most derived words in relation to the frequency of text appearance were 'SSA', 'establishment', and 'operation'. Second, as a result of the N-gram analysis, the pairs of words directly related to the SSA 'SSA and public', 'SSA and opening', 'SSA and launch', and 'SSA and Department Director', 'SSA and Staff', 'SSA and Caregiver' etc. Third, in the results of TF-IDF analysis and word network analysis, similar to the word occurrence frequency and N-gram results, 'establishment', 'operation', 'public', 'launch', 'provided', 'opened', ' 'Holding' and 'Care' were derived. Based on the above analysis results, it was suggested to strengthen the emergency care support group, to commercialize it in detail, and to stabilize jobs.