• Korean Journal of Applied Biomechanics
• /
• v.24 no.1
• /
• pp.19-26
• /
• 2014

This study investigated foot pressure patterns between experienced skiers and intermediate skiers during alpine skiing. Five experienced skiers and five intermediate skiers participated in this study. Foot pressure measurement system was used to measure vertical ground reaction force (vGRF) and contact area under the six plantar regions. Each participant was asked to perform basic parallel turns and carved turns on a $18^{\circ}$ groomed slope. Each right turn was divided into the initiation phase, the steering phase 1 and 2. For the initiation phase of the basic parallel turns, significantly greater contact area was found on the LRF and RRF of the intermediate skiers (p<.05) and significantly greater vGRF was found on the LRF of the intermediate skiers (p<.05). Also significantly greater vGRF and contact area were found on the LRF and RRF of the intermediate skiers at the steering phase 1 (p<.05) and on the LRF of the intermediate skiers at the steering phase 2 (p<.05). For the carved turns, significantly greater vGRF and contact area were found on the LRF and RRF of the intermediate skiers at all three phase (p<.05). On the other hand, significantly greater vGRF was found on the RFF of the experienced skiers at the steering phase 1 (p<.05). Also significantly greater vGRF and contact area were found on the RMF of the experienced skiers at the steering phase 2 (p<.05). In order to increase performance, we suggest that the intermediate skiers should be unweighted at the initiation phase and shift the body weight to the forefoot of the outer foot at the steering phase 1. Also, the outer ski should be loaded more than the both skis at the steering phase 1 and 2.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.2
• /
• pp.95-103
• /
• 2018

As a guideline for desulfurization and dehumidification pretreatment facility for optimizing utilization of biogas, the $H_2S$ concentration is set at 150 % which can be treated with iron salts, dehumidification is the optimum value for generator operation, and the relative humidity applied at the utilization of biogas in EU is set at 60 %. We have set up the generator facility guidelines to optimize utilization of biogas. The appropriate amount of biogas should be at least 90 % of the total gas generation, and the capacity of generator facility should be set at 20~30 %. In order to equalize the pressure of the incoming gas the generator, a gas equalization tank should be installed and the generator room average temperature should be kept at $45^{\circ}C$ or less. Since the gas is not produced at a certain methane concentration in the digester, the efficiency is lowered. Therefore, it is required to install an air fuel ratio control system according to the change in methane concentration. Therefore, it is necessary to compensate for the disadvantages of biogasification facilities of organic waste resources and optimize utilization of biogas and improve operation of facilities. This study was conducted to optimize biogas utilization of type of organic waste(containing sewage sludge and food waste, animal manure), investigate the facilities problem and propose design, operation guidelines such as pre-treatment facilities and generators.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.6
• /
• pp.603-611
• /
• 1997

The motor evoked potentials (MEPs) have been advocated as a method of monitoring the integrity of spinal efferent pathways in various injury models of the central nervous system. However, there were many disputes about origin sites of MEPs generated by transcranial electrical stimulation. The purpose of present study was to investigate the effect of major extrapyramidal motor nuclei such as lateral vestibular nucleus (VN) and medullary reticular nucleus (mRTN) on any components of the MEPs in adult Sprague-Dalwey rats. MEPs were evoked by electrical stimulation of the right sensorimotor cortex through a stainless steel screw with 0.5mm in diameter, and recorded epidurally at T9 - T10 spinal cord levels by using a pair of teflon-coated stainless steel wire electrodes with 1mm exposed tip. In order to inject lidocaine and make a lesion, insulated long dental needle with noninsulated tips were placed stareotoxically in VN and mRTN. Lidocaine of $2{\sim}3\;{\mu}l$ was injected into either VN or mRTN. The normal MEPs were composed of typical four reproducible waves; P1, P2, P3, P4. The first wave (P1) was shown at a mean latency of 1.2 ms, corresponding to a conduction velocity of 67.5 m/sec. The latencies of MEPs were shortened and the amplitudes were increased as stimulus intensity was increased. The amplitudes of P1 and P2 were more decreased among 4 waves of MEPs after lidocaine microinjection into mRTN. Especially, the amplitude of P1 was decreased by 50% after lidocaine microinjection into bilateral mRTN. On the other hand, lidocaine microinjection into VN reduced the amplitudes of P3 and P4 than other MEP waves. However, the latencies of MEPs were not changed by lidocaine microinjection into either VN or mRTN. These results suggest that the vestibular and reticular nuclei contribute to partially different role in generation of MEPs elicited by transcranial electrical stimulation.

• Journal of Radiation Protection and Research
• /
• v.33 no.3
• /
• pp.113-120
• /
• 2008

In this study, The TRITGO code was introduced, which can predict the amount of tritium production, it's transport, removal, distribution and the level of contamination for the produced hydrogen by the tritium on the VHTR (very high temperature gas cooled reactor). The TRITGO code was improved so that the permeation to the IS Iodine Sulfide) loop for producing the hydrogen can be simulated. The contamination level of the produced hydrogen by the tritium was predicted by the improved code for the VHTR with 600MW thermal power. The contamination level for the produced hydrogen by tritium was predicted as 0.055 Bq/$H_2-g$. This level is three order of lower than the regulation value of 56 Bq/$H_2-g$ from Japan. From this study, the following results were obtained. it is important that the fuel coating (SiC layer) should be kept intact to prevent the tritium from releasing. Also it is necessary that the level of impurity such as 3He and Li in the helium coolant and the reflector consisting of the graphite should be kept as low as possible. It was found that the capacity of the purification system for filtering the impurities directly from the coolant will be the important design parameter.

• Journal of Hospice and Palliative Care
• /
• v.2 no.2
• /
• pp.109-113
• /
• 1999

Purpose : Because we don't have inappropriate health care system for the terminal cancer patients, there were abnormal behavior patterns of health care utilization. So, There were needs to develop the comprehensive care for terminal cancer patients. Increased attention is being paid to the futility of life-sustaining treatment and high cost of management of terminal cancer patients Materials and Methods : This study was performed on cancer patients, registered in 1996 Central Cancer Registry, who were as insured person of Korea Medical Insurance and died from January 1997 to June 1998. We studied the day of medical care and medical expenses of 151 cancer patients evaluable. Results : The mean day of inpatient care was 39 days, and the mean days of outpatient care was 14 days in study subjects. Mean expenses per day of medical care, day of inpatient, and day of outpatients care were 85,392 won, 105,908 won, and 40,173 won. 95% of medical expenses is paid to the general hospital, and 85% of medical expenses was paid for inpatient care. About half of all medical expenses in th last 6 months were incurred in the last 60 days of life, and about 30 percent were incurred in the last 30 days. Expenses of outpatients care increased between 6 month and 3 months, after which they decreased. Expenses of inpatients care increased during all last 6months Conclusion : The distribution or medical expenses during the last 6 months in our study is similar to the distribution of American Medicare costs. We need to study medical expenses during the last year of life with large scale and details in order to develop the plan about the management of terminal cancer patient.

• Journal of Preventive Medicine and Public Health
• /
• v.31 no.3 s.62
• /
• pp.471-480
• /
• 1998

This study was undertaken in order to estimate the accuracy of disease code of the Korean National Medical Insurance Data and disease the characteristics related to the accuracy. To accomplish these objectives, 2,431 cases coded as notifiable acute communicable diseases (NACD) were randomly selected from 1994 National Medical Insurance data file and family medicine specialists reviewed the medical records to confirm the diagnostic accuracy and investigate the related factors. Major findings obtained from this study are as follows : 1. The accuracy rate of disease code of NACD in National Medical Insurance data was very low, 10.1% (95% C.I. : 8.8-11.4). 2. The reasons of inaccuracy in disease code were 1) claiming process related administrative error by physician and non-physician personnel in medical institutions (41.0%), 2) input error of claims data by key punchers of National Medical Insurer (31.3%) and 3) diagnostic error by physicians (21.7%). 3. Characteristics significantly related with lowering the accuracy of disease code were location and level of the medical institutions in multiple logistic regression analysis. Medical institutions in Seoul showed lower accuracy than those in Kyonngi, and so did general hospitals, hospitals and clinics than tertiary hospitals. Physician related characteristics significantly lowering disease code accuracy of insurance data were sex, age group and specialty. Male physicians showed significantly lower accuracy than female physicians; thirties and fortieg age group also showed significantly lower accuracy than twenties, and so did general physicians and other specialists than internal medicine/pediatric specialists. This study strongly suggests that a series of policies like 1) establishment of peer review organization of National Medical Insurance data, 2) prompt nation-wide expansion of computerized claiming network of National Medical Insurance and 3) establishment and distribution of objective diagnostic criteria to physicians are necessary to set up a national disease surveillance system utilizing National Medical Insurance claims data.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.67-75
• /
• 1999

The use of composite restorative materials is established due to continuing improvements in the materials and restorative techniques. Composite resins are widely used for the restoration of cervical lesions because of esthetics, good physical properties and working time. There are several types of cavity design for class V composite resin filling, but inappropriate cavity form may affect bonding failure, microleakage and fracture during mastication. Cavity preparations for composite materials should be as conservative as possible. The extent of the preparation is usually determined by the size, shape, and location of the defect. The design of the cavity preparation to receive a composite restoration may vary depending on several factors. In this study, 5 types of class V cavity were prepared on each maxillary central incisor. The types are; 1) V-shape, 2) round(U) shape, 3) box form, 4) box form with incisal bevel and 5) box form with incisal bevel and grooves for axial line angles. After restoration, in order to observe the concentration of stress at bonding surfaces of teeth and restorations, developing a 2-dimensional finite element model of labiopalatal section in tooth, surrounding bone, periodontal ligament and gingiva, based on the measurements by Wheeler, loading force from direction of 45 degrees from lingual side near the incisal edge was applied. This study analysed Von Mises stress with SuperSap finite element analysis program(Algor Interactive System, Inc.). The results were as follows : 1. Stress concentration was prevalent at tooth-resin bonding surface of cervical side on each model. 2. In model 2 without line angle, stress was distributed evenly. 3. Preparing bevel eliminated stress concentration much or less at line angle. 4. Model with round-shape distributed stress concentration more evenly than box-type model with sharp line angle, therefore decreased possibility of fracture. 5. Adding grooves to line angles had no effect of decreasing stress concentration to the area.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.2
• /
• pp.71-80
• /
• 1993

The purpose of this study was to compare the intrinsic absorptivity of piperacillin in the jejunum and the nasal cavity, to investigate the effect of bile salts, fatty acids and their mixed micelles on the intestinal and nasal absorption of piperacilIin, to examine the reversibiIity of bile salt-fatty acid mixed micelles absorption promoting action and to design an effective intranasal drug delivery system for antibiotics. And absorption promoters used were bile salts [sodium cholate (NaC), sodium glycocholate (NaGC)], unsaturated fatty acids [oleic acid (OA), linoleic acid (LA)] and their mixed micelles (NaC-LA). The present study employed the in situ nasal and intestinal perfusion technique in rats. The apparent permeabilities $(P_{app})$ of piperacillin were $0.40{\pm}0.04{\times}10^{-5}cm/sec(mean{\pm}S.E)$ in the jejunum and $1.32{\pm}0.08{\times}10^{-5}\;cm/sec$ in the nasal cavity, which indicated that intrinsic absorptivity of piperacillin was greater in the nasal cavity than in the jejunum. When absorption promoters were used in the rat nasal cavity, the decreasing order of apparent piperacillin permeability $(P_{app},\;10^{-5}\;cm/sec)$, corrected for surface area of absorption, was NaC-LA $(4.62{\pm}0.16)$> NaC $(4.36{\pm}0.32)$>LA$(2.24{\pm}0.26)$ NaGC $(2.17{\pm}0.21)$>OA $(1.53{\pm}0.16)$. The increase in permeability of piperacillin was 3.5-fold in the rat nasal cavity and 1.5-fold in the rat jejunum for formulations containing NaC-LA mixed micelles as compared to those without absorption enhancer. The effect of NaC-LA mixed micellar solutions was synergistic and was greater than that with single adjuvant. The reversibility of nasal mucosal permeability was observed within approximately 2 hr after removal of NaCLA mixed micelles from the nasal cavity. These results suggest that NaC-LA mixed micelles can be used as nasal mucosal absorption promoters of poorly absorbed drugs.

• Journal of Preventive Medicine and Public Health
• /
• v.41 no.5
• /
• pp.287-294
• /
• 2008

Objectives : To estimate the economic burden of osteoporotic vertebral fracture (VF) from a societal perspective. Methods : From 2002 to 2004, we identified all National Health Insurance claims records for women ${\geq}50$ years old with a diagnosis of VF. The first 6-months was defined as a "clearance period," such that patients were considered as incident cases if their first claim of fracture was recorded after June 30, 2002. We only included patients with ${\geq}$ one claim of a diagnosis of, or prescription for, osteoporosis over 3 years. For each patient, we cumulated the claims amount for the first visit and for the follow-up treatments for 1 year. The hospital charge data from 4 hospitals were investigated to measure the proportion of the non-covered services. Face-to-face interviews were conducted with 106 patients from the 4 study sites to measure the out-of-pocket spending outside of hospitals. Results : During 2.5 years, 131,453 VF patients were identified. The patients had an average of 3.38 visits, 0.40 admissions and 6.36 inpatient days. The per capita cost was 1,909,690 Won: 71.5% for direct medical costs, 20.6% for direct non-medical costs and 7.9% for indirect costs. The per capita cost increased with increasing age: 1,848,078 Won for those aged 50-64, 2,084,846 Won for 65-74, 2,129,530 Won for 75-84and 2,121,492 Won for those above 84. Conclusions : Exploring the economic burden of osteoporotic VF is expected to motivate to adopt effective treatment options for osteoporosis in order to prevent the incidence of fracture and the consequent costs.

• Ocean and Polar Research
• /
• v.27 no.3
• /
• pp.265-276
• /
• 2005

In order to grasp the structure and dynamics of phytoplankton communities, chlorophyll-a (Chl-a) and cell abundance were measured at 20 stations during the period from August 9 to August 21, 2003 in the southeastern Barents Sea on surface and subsurface chlorophyll maximum depth (SCM). Surface temperatures were varied from minimum $-0.7^{\circ}C(st. 18)$ to maximum $10.4^{\circ}C(st.1)$. Salinities were varied from minimum 29.9 psu(st. 18) to maximum 35.8 psu(st.2). The maximum nutrient(phosphate, nitrate, silicate) concentrations were $0.12{\mu}M,\;0.11{\mu}M,\;7.53{\mu}M$ and minimum concentrations were $0.01{\mu}M,\;0.03{\mu}M,\;1.43{\mu}M$, respectively. On SCM physical environmental factor were almost similar. Chl-a concentrations ranged from 0.23 to $2.13{\mu}g\;chi-a\;l^{-1}$ at SCM. Nano- and pico phytoplankton were the important contributors for increase of the Chl-a. It was about seven times difference between highest concentration to lowest. Phytoplankton communities were composed of diatoms, dinoflagellates, cryptophyceae, silicoflagellate, and prymnesiophyceae showing 37 taxa at surface and 38 taxa at SCM. Picophytoplankton was the most dominant in all stations and all layers, but the second groups were 2 and/or 3 taxa. Phytoplankton abundance ranged from minimum $4.3{\times}10^5\;cells\;l^{-1}$ (st. 20) to maximum $2.4{\times}10^6\;cells\;l^{\-1}$. (st. 17) at surface water. As a result, phytoplankton might be controlled by physical factors such as North Atlantic ocean currents and northern melt water among environmental factors in Barents Set h addition the dominant species were nano- and pico phytoplankton such as Phaeocystis, Cryptomonas and Dinobryon in the study area.