• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.2
• /
• pp.31-40
• /
• 2009

South Korea opened Incheon international airport(IIA) in march 29, 2001, with high expectations of becoming the distribution hub of Northeast Asia and aiming at a world best air hub. IIA compares quite well with any other leading airports in the world in it's facilities for the movement of people and vehicles. However, with the sequence of events following the September, 2001. terrorist attack and the war in Iraq, South Korea, an ally of the US, cannot be considered a safe haven from terrorism. At a point in time when national security is given utmost importance, it is necessary to reevaluate the security of airports, because international terrorism can only occur via air and seaports. Nowadays all the countries of the world have entered into competition for their national interests and innovation of their images. with the increasing role of international airports also comes an increased likelihood as a terrorist target, because it can affect so many people and countries. From the condition of current international terrorism, we can realize that our IIA is not completely safe from a terrorist attack. The major part of counterterrorism is event control process. It's very important for quickly saves an accident and rescues a life of person, In addition for the normalization which the airport operation is prompt. In conclusion, we should secure the legal responsibility and establish and establish a system under which we can work actively in order to implement counter terror activities from being taken an airport.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.3
• /
• pp.91-106
• /
• 2003

The objective of this study is to present management methods for Korean golf courses to achieve fast green that satisfies international golf tournament standards during an official golf tournament. The results of both the research and the comparative study on putting green management of 24 tournaments hosted in Korea and 12 tournaments hosted in overseas countries in 2002 are as follows: 1. As for the putting greens in Korean and foreign golf courses where official golf tournaments were held, Korean of official golf tournaments were mainly opened in two-green system golf courses contrary to the foreign cases, and the average size of the greens in Korean golf courses was shown to be greater than that of foreign golf courses to some extent, although there was no difference between the types of turf varieties. 2. Results have shown that unlike foreign golf courses, Korean golf courses were managing putting greens by using greens mowers mostly for general (non-tournament) management, and elaborate rolling attempts failed during official tournament flay week because of an insufficient number of rollers to be input. Therefore, Korean golf courses are required to make efforts to secure 21-inch working-behind greens mowers equipped with tournament bedknifes and 11 blades, which is the greens mowing equipment for professional tournaments, and rollers above all things in order to achieve fast green during tournament play week 3. In attempting to achieve green as fast as that of foreign golf courses, Korean golf courses need to consider the method of performing mowing at 3.0mm height or less with greens mowers for professional tournaments. This needs to be done more than two times, followed by a continuous practice of rolling for proper management.

• Journal of KIISE:Databases
• /
• v.36 no.2
• /
• pp.63-72
• /
• 2009

Digital forensics refers to finding electronic evidences related to crimes. As cyber crimes are increasing daily, digital forensics for finding electronic evidences is also becoming important. At present, various aspects of digital forensics have being researched including the overall process model and analysis techniques such as network forensics, system forensics and database forensics for digital forensics. Regarding database forensics, only analysis techniques dependent on specific vendors have been suggested. And general process models and analysis techniques which can be used in various databases have not been studied. This paper proposes an integrated process model and analysis technique for database forensics. The proposed database forensics model (DFM) allows us to solve problems and analyze databases according to the situation and purpose, and to use a standard model and techniques for various database analyses. In order to test our model(DFM), we applied it to various database analyses. And we confirmed the results of our experiment that it can be applicable to acquisition in the scene as well as analysis of data relationships.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1502-1511
• /
• 2013

In this study, simulation works have been performed for the modeling of $CO_2$ removal process contained in the DME production process through an absorber-stripper system using methanol aqueous solution. Aspen Plus release 7.3 in AspenTech company was utilized as a simulation tool and PC-SAFT modeling equation of state was used as a thermodynamic model. Fitting parameters built-in PC-SAFT model was determined by regressing experimental data, predicted results using PC-SAFT model were compared with experimental data in order to verify the exactness of the thermodynamic model. Optimization works have been performed to reduce the utility consumptions using solvent circulation rate, column operating pressure and feed stage location as manipulated variables.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.49-54
• /
• 2003

In this paper, we propose a controller with the self-organizing neural network compensator for compensating PID controller's response. PID controller has simple design method but needs a lot of trials and errors to determine coefficients. A neural network control method does not have optimal structure as the parameters are pre-specified by designers. In this paper, to solve this problem, we use a self-organizing neural network which has Back Propagation Network algorithm using a Gaussian Potential Function as an activation function of hidden layer nodes for compensating PID controller's output. Self-Organizing Neural Network's learning is proceeded by Gaussian Function's Mean, Variance and number which are automatically adjusted. As the results of simulation through the second order plant, we confirmed that the proposed controller get a good response compare with a PID controller. And we implemented the of controller performance hydraulic servo motor system using the DSP processor. Then we observed an experimental results.

• Journal of KIISE:Databases
• /
• v.33 no.2
• /
• pp.224-238
• /
• 2006

As XML became the standard of data exchange in the internet, the needs for effective query processing for XML data in streaming environment is increasing. Applying the existing database technique which processes data with the unit of tuple to the streaming XML data causes the out-of-memory problem due to limited memory volume. Likewise the cost for searching query path and accessing specific data may be remarkably increased because of special structure of XML. In a word it is unreasonable to apply the existing database system to the streaming environment that processes query for partial data, not the whole one. Thus, it should be able to search partial streaming data that rapidly satisfies join predicate through using low-capacity memory, based on a store technique suitable to streaming XML data. In this thesis, in order to study the store technique for low-capacity memory, the PCDATA and the CDATA-related parts, which can be used as predicate on join query, were fetched and saved. In addition, in an attempt to compare rapid join predicates, the range window of streaming XML data was set with the object of selectively joining windows that satisfies the query, based on Cardinality * and + among the structure information of DTD.

• Journal of KIISE:Software and Applications
• /
• v.29 no.1_2
• /
• pp.91-97
• /
• 2002

This paper describes a heuristic search technique carrying out collision avoidance for Autonomous Underwater Vehicles(AUVs). Fuzzy relational products are used as the mathematical implement for the analysis and synthesis of relations between obstacles that are met in the navigation environment and available candidate nodes. In this paper, we propose a more effective evaluation function that reflects the heuristic information of domain experts on obstacle clearance, and an advanced heuristic search method performing collision avoidance for AUVs. The search technique adopts fuzzy relational products to conduct path-planning of intelligent navigation system. In order to verify the performance of proposed heuristic search, it is compared with $A^*$ search method through simulation in view of the CPU time, the optimization of path and the amount of memory usage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.261-261
• /
• 2007

Wearable and ubiquitous micro systems will be greatly growing and their related devices should be self-powered in order to avoid the replacement of finite power sources, for example, by scavenging energy from the environment. With ever reducing power requirements of both analog and digital circuits, power scavenging approaches are becoming increasingly realistic. One approach is to drive an electromechanical converter from ambient motion or vibration. Vibration-driven generators based on electromagnetic, electrostatic and piezoelectric technologies have been demonstrated. Among various generator types proposed so far, piezoelectric generator possesses considerable potential in micro system. To overcome low mechanical-to- electric energy conversion, the piezoelectric device should activate in resonance mode in response to external vibration. Normally, the external vibration excretes at low frequency ranging 0.1 to 200 Hz, whereas the resonant frequencies of the devices are fixed as constant. Therefore, keeping their resonant mode in varying external vibration can be one of important points in enhancing the conversion efficiency. We investigated the possibility of use of multi-bender type piezoelectric devices. To match the external vibration frequency with the device resonant frequency, the various devices with different resonant frequency were chosen. Under an external vibration acceleration of 0.1G at 120 Hz, the device exhibited a peak-to-peak voltage of 2.8 V and a power of 0.5 mw in resonance mode.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.92-98
• /
• 2008

A combination of the instrumented indentation and 3D morphology measurement has been tried in order to perform a real-time property measurement of degraded materials in gas pipelines; three-dimensional indent morphologies were recorded using a reflective laser scanner after a series of insturmented indentations on three metallic specimens. Dimensions of the permanent deformation zone and contact boundary were analyzed from the cross-sectional profile over an remnant indent and used for estimating yield strength and hardness, respectively. Estimated yield strength was comparable with that from uniaxial tensile test and actual hardness implying material pile-up effects was lower than the calculated value from indentation curve by $20{\sim}30%$. It means that this 3D image analysis can explain the material pile-up effects on the contact properties. Additionally, a combined system of indentation and laser sensor was newly designed by modifying a shape of the indentation loading fixture.

• Journal of Intelligence and Information Systems
• /
• v.11 no.2
• /
• pp.17-29
• /
• 2005

The purpose of the study was to explore the potential of the Social Network Analysis as an analytical tool for scientific investigation of learner-learner, or learner-tutor interaction within a Computer Supported Corporative Learning (CSCL) environment. Theoretical and methodological implication of the Social Network Analysis had been discussed. Following theoretical analysis, an exploratory empirical study was conducted to test statistical correlation between traditional performance measures such as achievement and team contribution index, and the centrality measure, one of the many quantitative measures the Social Network Analysis provides. Results indicate the centrality measure was correlated with the higher order teaming performance and the peer-evaluated contribution indices. An interpretation of the results and their implication to instructional design theory and practices were provided along with some suggestions for future research.