• YAKHAK HOEJI
• /
• v.47 no.3
• /
• pp.159-166
• /
• 2003

In order to study the clinical usefulness of crude polysaccharides fractionated from Eleutherococcus senticosus, EN-3, in eliminating tumors, we have investigated the effect of combination therapy on the murine tumor metastasis and growth models. In experimental metastasis of colon26-M3.1 cells, prophylactic intravenous (i.v.) administration of EN-3 (0.5, 5, and 50 $\mu\textrm{g}$/mouse) inhibited tumor metastasis compared with tumor control group in 33.6, 66.8, and 81.8％ respectively. The administration of EN-3 (50 $\mu\textrm{g}$/mouse) also exhibited a 66.1％ therapeutic effect on lung tumor metastasis. Although EN-3 induced no toxic effect on both tumor cell and normal splenocyte in the concentration below 100 $\mu\textrm{g}$/mι in in vitro, it induced significant proliferating activity on normal splenocyte in the concentration-dependent manner. In an analysis of NK-cell activity, i.v. administration of EN-3 (4∼100 $\mu\textrm{g}$/mouse) significantly augmented NK cytotoxicity to YAC-1 tumor cells. The combination treatments of cisplatin (10 $\mu\textrm{g}$) and EN-3 (5 $\mu\textrm{g}$) induced synergistic effect on the inhibition of tumor metastasis in experimental tumor metastasis model produced by colon26-M3.1 cells. In addition, the combination treatments also exhibited prolongation of lifespan in S∼180 tumor bearing mouse for over the 60 days. Even though cisplatin (2.5 $\mu\textrm{g}$/mι) exhibited cytotoxicity to tumor cells and inhibited tumor growth over 95％ in in vitro, combination treatment with EN-3 (20 $\mu\textrm{g}$/mι) was induced splenocyte proliferation and produced cytokines, such as TNF-$\alpha$, IL-1 and IL-12, from the macrophages. These results suggested that EN-3 stimulate immune system non-specifically and apply to the biological response modifiers (BRM) in chemo-immunotherapy for tumor prevention.

• YAKHAK HOEJI
• /
• v.41 no.1
• /
• pp.48-59
• /
• 1997

Sustained release matrix tablets, pellets, and coated pellets for the delivery of sulindac were prepared using cellulose derivatives at various ratios, and evaluated for the dis solution pattern. The release of sulindac, from matrix tablets prepared with low viscosity HPMC was relatively fast, and especially the tablets made of Metolose SM released all of sulindac within 1 hr. The release of drug from tablets made of other HPMC derivatives were retarded in the order of the following: Pharmacoat 645>Pharmacoat 606>Pharrnacoat 606+HPC-L>HPC-L. The most sustained release pattern was observed with the preparation of high viscous polymer. Metolose 90 SH. While release of sulindac, from matrix type pellet containing 10mg/cap of Metolose 90 SH or 60 SH was completed within 1 hr, a prolonged release formulation (30% in 1 hr) was obtained by the inclusion of EC. Pellets coated with HPMC showed a fast release pattern (${\geq}$ 80% within 2 hrs), whereas pellets coated with HPMC and EC (molar ratio 1 : 1) showed a sustained release pattern (${\geq}$ 80% in 12 hrs), vath the release from EC pellets being the most sustained. Fast (naked) and slow release pellets coated with EC, Metolose 60SH 50cps and propylene glycol. and enteric pellets coated with HPMCP 55 and Myvacet$^{\circledR}$ were prepared, and combined at various ratios for the assessment of dissolution pattern. The result indicates the possibility that the development of 24 hr sustained release delivery systems containing sulindac for oral administration could be achieved by means of combining sustained and fast release pellets at a proper portion.

• Korean Journal of Agricultural Science
• /
• v.35 no.1
• /
• pp.69-83
• /
• 2008

The self-supply rate of Korea in 2006 was approximately 27.3 % by importing 13.99Mt for 19.79Mt of demanded amount. Among the imported crops, wheat, corn, and soybean consumed 95 % for the total imported amount, and wheat, corn, and soybean were 3.5Mt(Table use : 0.22Mt; Feed stuff : 0.13Mt), 8.7Mt(Table use : 0.19Mt; Feed stuff : 0.68Mt), and 1.2Mt (Table use : 0.03Mt; Feed stuff : 0.09Mt), respectively. On the other hand, our government has prepared the strategies for a great fear of food according to sharp price rise of the international crops by maintaining the self-supply rate of 5 % excluding 5.23Mt of rice in Korea. Also concern for recycled energy known as future energy for era of high oil price and global warming due to green house gas is rapidly growing. Therefore, our country which has relied on import of the whole oil needed in Korea and has to keep Kyoto Agent to request reduction of green house gas fully support research and practical use for agricultural products as resource of alternate energy. At first, we have to develop the mass production technology in order to secure a program of self-supply of food for bioenergy production utilizing agricultural product in Korea. But we assume that this matter is difficult to achieve under the current agriculture system that more emphasizes the environment conservation such as environmentally-friendly agriculture than production of food.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1365-1375
• /
• 2009

The types and quantities of Hazmat and Hazmat transport are gradually increasing, keeping pace with industrialization and urbanization. There are currently more than 1,000 types of Hazmat,, and new types are added every year. At present the safety management for Hazmat transport only considers reducing accident probability, but even when an accident involving Hazmat-carrying vehicles occurs, that is not regarded as a Hazmat-related accident if the Hazmats do not leak out from the containers carrying them. Based on this principle, in turn., the methods to reduce risk (Risk=Probability$\times$Consequence) have to be developed by incorporating accident probability and consequence. By using Geographic Information System (GIS), a technical method was invented and is automatically able to evaluate the consequence by different types of Hazmat. Thus this study analyzed the degree of risk on the links classified by the Hazmat transport pathways. In order to mitigate the degree of risk, a method of 7-step risk management in transporting Hazmat on railway industries was suggested. The 7-step risk management is definded as the following: 1st step: buliding up GIS DB, 2nd step: calculating accident probability on each link, 3rd step: calculating consequence by Hazmat types, 4th step: determination of risk, 5th step: analysis of alternative plans for mitigating the risk, 6th: measure of effectiveness against each alternative, and 7th step: action plans to be weak probability and consequence by the range recommended from ALARP. In conclusion., those 7 steps are recommended as a standardization method in this study.

• Journal of Computational Design and Engineering
• /
• v.2 no.3
• /
• pp.157-164
• /
• 2015

This paper discusses an optimization-based approach for the design of a product platform for industrial three-axis linear-type robots, which are widely used for handling objects in manufacturing lines. Since the operational specifications of these robots, such as operation speed, working distance and orientation, weight and shape of loads, etc., will vary for different applications, robotic system vendors must provide various types of robots efficiently and effectively to meet a range of market needs. A promising step toward this goal is the concept of a product platform, in which several key elements are commonly used across a series of products, which can then be customized for individual requirements. However the design of a product platform is more complicated than that of each product, due to the need to optimize the design across many products. This paper proposes an optimization-based fundamental framework toward the design of a product platform for industrial three-axis linear-type robots; this framework allows the solution of a complicated design problem and builds an optimal design method of fundamental features of robot frames that are commonly used for a wide range of robots. In this formulation, some key performance metrics of the robot are estimated by a reducedorder model which is configured with beam theory. A multi-objective optimization problem is formulated to represent the trade-offs among key design parameters using a weighted-sum form for a single product. This formulation is integrated into a mini-max type optimization problem across a series of robots as an optimal design formulation for the product platform. Some case studies of optimal platform design for industrial three-axis linear-type robots are presented to demonstrate the applications of a genetic algorithm to such mathematical models.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.2
• /
• pp.200-214
• /
• 1994

In order to clarify the benthic environmental properties as a part of a study on the macrobenthic community in the Chinhae Bay System, water temperature, salinity and dissolved oxygen (DO) in surface and bottom water layers, mean grain size (${\phi}$) and sediment organic carborn (SOC) in surface sediment were analyzed at twelve stations during the period from June 1987 to May 1990. A high sediment organic carbon and hypoxic condition in bottom water due to the development of summer stratification and fine sediment texture toward the inner bay were important environmental characteristics of Chinhae Bay. Hypoxic conditions began to develop in the inner bay from May, and gradually spread toward the outer bay in summer with a peak in September when half the bay was affected by this oxygen deficiency. Recovery from this hypoxic condition in the bottom layer was observed from the beginning of autumn together with a disappearance of the summer stratification. Principal component analyses were carried out from the following five environmental variables:mean water temperature, salinity, dissolved oxygen in the bottom layer and mean grain size, sediment organic carbon in surface sediment. The twelve stations were classified into four areal groups based on the analyses. The division of the areal groups had high correlations to the sediment organic carbon content.

• Nuclear Engineering and Technology
• /
• v.52 no.11
• /
• pp.2460-2470
• /
• 2020

To study the thermophysical and neutronic properties of thorium-plutonium fuel, a conceptual design of a hybrid facility consisting of a subcritical Th-Pu reactor core and a source of additional D-D neutrons that places on the axis of the core is proposed. The source of such neutrons is a column of high-temperature plasma held in a long magnetic trap for D-D fusionreactions. This article presents computer simulation results of generation of thermonuclear neutrons in the plasma, facility neutronic properties and the evolution of a fuel nuclide composition in the reactor core. Simulations were performed for an axis-symmetric radially profiled reactor core consisting of zones with various nuclear fuel composition. Such reactor core containing a continuously operating stationary D-D neutron source with a yield intensity of Y = 2 × 10¹⁶ neutrons per second can operate as a nuclear hybrid system at its effective coefficient of neutron multiplication 0.95-0.99. Options are proposed for optimizing plasma parameters to increase the neutron yield in order to compensate the effective multiplication factor decreasing and plant power in a long operating cycle (3000-day duration). The obtained simulation results demonstrate the possibility of organizing the stable operation of the proposed hybrid 'fusion-fission' facility.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1999.07a
• /
• pp.11-15
• /
• 1999

In order to evlauate feasibility of the gene tagging by the maize transposable element Ac in heterologous plant systems, we have investigated physical distances and directions of transposition of the element in Arabidopsis thaliana and tobacco cultured cell line BY-2. We prepared a T-DNA construct that carried a non-autonomous derivative of Ac with a site for cleavage by endonuclease I-Scel (designated dAc-I-RS element). Another cleavage site was also introduced into the T-DNA region outside dAc-I-RS. A number of transgenic Arabidopsis plants were generated, each of which had a single copy of the T-DNA at a different chromosomal location. To examine the pattern of transposition, three out of these transgenic plants were crossed with the Arabidopsis plant that carried the gene for Ac transposase and progeny in which dAc-I-RS had been transposed were isolated. After digestion of the genomic DNA of these progeny with I-SceI, sizes of segment of DNA were determined byd pulse-field gel electrophoresis. We also performed linkage analysis for the transposed elements and sites of mutations near the elements. Our results with three transgenic lines showed that 50% of all transposition events had occurred within 1,700 kilo-base pairs (kb) on the same chromosome, with 35% within 200 kb, and that the elements transposed in both directions on the chromosome with roughly equal probability. The data thus indicate that the Ac-Ds system is most useful for tagging of genes that are present within 200 kb of the chromosomal site of Ac in Arabidopsis. In addition, determination of the precise localization of the transposed dAc-I-RS element should definitely assist in map-based cloning of genes around insertion sites. In the present paper, we report typical examples of such gene isolation studies.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1985.08b
• /
• pp.51-57
• /
• 1985

In order to evlauate feasibility of the gene tagging by the maize transposable element Ac in heterologous plant systems, we have investigated physical distances and directions of transposition of the element in Arabidopsis thaliana and tobacco cultured cell line BY-2. We prepared a T-DNA construct that carried a non-autonomous derivative of Ac with a site for cleavage by endonuclease I-Scel (designated dAc-I-RS element). Another cleavage site was also introduced into the T-DNA region outside dAc-I-RS. A number of transgenic Arabidopsis plants were generated, each of which had a single copy of the T-DNA at a different chromosomal location. To examine the pattern of transposition, three out of these transgenic plants were crossed with the Arabidopsis plant that carried the gene for Ac transposase and progeny in which dAc-I-RS had been transposed were isolated. After digestion of the genomic DNA of these progeny with I-SceI, sizes of segment of DNA were determined byd pulse-field gel electrophoresis. We also performed linkage analysis for the transposed elements and sites of mutations near the elements. Our results with three transgenic lines showed that 50% of all transposition events had occurred within 1, 700 kilo-base pairs (kb) on the same chromosome, with 35% within 200 kb, and that the elements transposed in both directions on the chromosome with roughly equal probability. The data thus indicate that the Ac-Ds system is most useful for tagging of genes that are present within 200 kb of the chromosomal site of Ac in Arabidopsis. In addition, determination of the precise localization of the transposed dAc-I-RS element should definitely assist in map-based cloning of genes around insertion sites. In the present paper, we report typical examples of such gene isolation studies.

• Journal of the Korean Dietetic Association
• /
• v.9 no.2
• /
• pp.138-148
• /
• 2003

The purpose of this study was to analyze information about food and nutrition topics presented throughout the television broadcast media, thereby suggest the optimal communication method to give right information to the general public. To perform this study, total sixteen monitoring people were recruited and trained through monitoring practice before and during the study . Five domestic TV channels were selected to be monitored, for six months. For the best efficiency, all the monitoring people were divided into 8 teams based on the regional consideration. The statistical analysis of data was completed using SAS program. The main results of this study are as follows. First, the total reporting cases of information about foods and nutrition were 237 , among which about 30% was classified as appropriate and 70% as inappropriate based on the trained monitors' evaluation. Second, the analysis of contents about incorrect informations showed that the insufficient descriptions of terminology and contents were the highest. And insufficient scientific evidences, incorrect contents excessively entertainment-oriented, no provision of alternatives , improper selection of expert advisors were followed. These results suggest that systematical monitoring should be continued to reduce the frequency of incorrect communication thereby give the right information in food and nutrition area to the general public. And there should be a closely cooperated system to provide the professional information to broadcasting production team by establishing the strategic program. In order to do that, most importantly the advisory team should be organized to professionally connect mass media to corresponding specialists. In addition, more educational programs about food and nutrition should be developed to provide right information to the general public.