• International Journal of Aerospace System Engineering
• /
• v.10 no.2
• /
• pp.1-4
• /
• 2023

Even though the recent development trend of wind turbine systems has been focused on larger MW Classes, the small-scale wind turbine system has been continuously developed because it has some advantages due to easy personnel establishment and use with low cost and energy saving effect. This work is to propose a specific structural design and analysis procedure for development of a low noise 500W class small wind turbine system which will be applicable to relatively low wind speed region like Korea. The proposed structural feature has a skin-spar-foam sandwich composite structure with the E-glass/Epoxy face sheets and the Urethane foam core for lightness, structural stability, low manufacturing cost and easy manufacturing process. Moreover this type of structure has good behaviors for reduction of vibration and noise. Structural analysis including load cases, stress, deformation, buckling and vibration was performed using the Finite Element Method. In order to evaluate the designed blade structure the structural tests were done, and their test results were compared with the estimated results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.4
• /
• pp.335-341
• /
• 2017

In this paper, beam finite elements with higher-order derivatives' continuity are formulated and evaluated for various boundary conditions. All the beam elements are based on Euler-Bernoulli beam theory. These higher-order beam elements are often required to analyze structures by using newly developed higher-order beam theories and/or non-classical beam theories based on nonlocal elasticity. It is however rare to assess the performance of such elements in terms of boundary and loading conditions. To this end, two higher-order beam elements are formulated, in which $C^2$ and $C^3$ continuities of the deflection are enforced, respectively. Three different boundary conditions are then applied to solve beam structures, such as cantilever, simply-support and clamped-hinge conditions. In addition to conventional Euler-Bernoulli beam boundary conditions, the effect of higher-order boundary conditions is investigated. Depending on the boundary conditions, the oscillatory behavior of deflections is observed. Especially the geometric boundary conditions are problematic, which trigger unstable solutions when higher-order deflections are prescribed. It is expected that the results obtained herein serve as a guideline for higher-order derivatives' continuous finite elements.

• Journal of Environmental Science International
• /
• v.19 no.9
• /
• pp.1137-1142
• /
• 2010

This study proposes a guideline of a green roof system suitable for the local environment by verifying the growth of Zoysia japonica in a shallow, extensive, green roof system under rainfed condition. The experimental soil substrates into which excellent drought tolerance and creeping Z. japonica was planted were made with different soil thicknesses(15cm, 25cm) and soil mixing ratios(SL, $P_7P_1L_2$, $P_6P_2L_2$, $P_5P_3L_2$, $P_4P_4L_2$). The plant height, green coverage ratio, fresh weight, dry weight and chlorophyll contents of Z. japonica were investigated. For the soil thickness of 15cm, the plant height of Z. japonica was significantly as affected by the soil mixing ratio and it was shown in the order SL= $P_4P_4L_2$ < $P_7P_1L_2$ = $P_5P_3L_2$ < $P_6P_2L_2$. For the soil thickness of 25cm, the plant height was increased in order to SL < $P_7P_1L_2$, $P_6P_2L_2$, $P_5P_3L_2$ < $P_4P_4L_2$. The green coverage ratio was not observed by soil the mixing ratio or soil thickness. However, the green coverage ratio was 86~90% with a good coverage rate overall. The chlorophyll contents of Z. japonica were not significantly affected by the soil mixing ratio in the soil thickness of 15cm, but were higher in the natural soil than in the artificial soil at 25cm soil thickness. The fresh weight and dry weight of Zoysia japonica were heavier in the 25cm thickness than in the 15cm thickness and in the artificial soil mixture than in the natural soil. The result indicated that the growth of Zoysia japonica was more effective in the 25cm soil thickness with artificial soil than in the 15cm soil thickness with natural soil in the green roof system under rainfed condition.

• English Language & Literature Teaching
• /
• v.18 no.1
• /
• pp.115-132
• /
• 2012

In order to confirm ecological validity of D$\ddot{o}$rnyei's second language motivational self, the present study investigated 495 South Korean secondary school students' L2 learning motivation and motivated behavior by using a questionnaire survey. The participants' ideal L2 self, ought-to L2 self, integrativeness, and instrumentality were examined and compared to identify which motivational factor had the most effect on their motivated L2 learning behavior. Among Korean secondary school students, the concept of integrativeness was replaced with the ideal L2 self as a more appropriate concept for understanding Korean secondary school students' L2 learning motivation. As for instrumentality, promotional aspects demonstrated a significant correlation with both the ideal and ought-to L2 selves, whereas preventional aspects showed a relatively high correlation with the ought-to L2 self. The ideal L2 self had the most impact on the motivated behavior, and the ideal L2 self and ought-to L2 self reflected the students' different motivational characteristics. It is suggested that D$\ddot{o}$rnyei's (2005, 2009) L2 motivational self system can be a better psychological model than Gardner's (1985) socio-educational model for understanding Korean secondary school students' L2 learning motivation.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.81-88
• /
• 2010

This paper describes a development of next generation information remote retrieval and warning system that enables the user to make slope information retrieval remotely for a rockfall and landslide disaster reduction from mobile environments. And this system will be able to warn with a real-time stability condition about the slope which circumference are contiguous in standard user location. Slope information which provides to the user, become the service which upgrades from depth deep information directness will be able to confirm in order from field with applies multimedia style information which is various. In order to retrieve slope information with the wire and wireless internet from the remote place, we used mobile PC carrying is simple. Also this system attached GPS receiver to mobile PC in order to confirm user location as a real-time from the electronic map from field. Specially this system user location divide the safety of the slope which within the area where are fixed in the center are representative with 'safe area', 'collapse area' and 'collapse forecast area' etc. And to indicate with the icon of each other different color simultaneously in the electronic map. With like that reason, this system which sees the user even while moving safety condition about circumferential slope from the electronic map is having the strong point will be able to grasp with a real-time in one eye. Also warning message leads at the case real-time when the collapse will occur in specific slope, to inform to the user. Therefore this system which sees will be able to reduce the disaster which is caused by in landslide a very big strong point and has.

• Journal of Aerospace System Engineering
• /
• v.1 no.2
• /
• pp.13-20
• /
• 2007

Structural qualification plan (SQP) for aerospace vehicle is based on material certification methodology, which must be approved by certification authority. It is internationally required to use of statistically based material allowables to design aerospace vehicles with aerospace materials. In order to comply with this regulation, it is necessary to establish relatively large amount of database, which increases test costs and time. Recently NASA/FAA develop the new methodology which results in cost, time, and risk reduction, and satisfies the regulation at the same time. This paper summarizes the certification methodology of materials system as a part of structural qualification plan (SQP) of aerospace vehicles and also thermal management of the vehicle system, like thermal protection materials system and thermally conductive material system. Materials design allowable was determined using this method for a carbon/epoxy composite material.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.6
• /
• pp.567-572
• /
• 2009

The underwater launch system using an ATP consists of five parts: compressor tank, proportional flow control servo valve, expulsion spool valve, air turbine pump, and discharge tube. The purpose of this study is to develop an underwater launch system using an ATP and to verify the validity of the system. The proportional flow control servo valve is modeled as a 2nd order transfer function. The projectile is ejected by pressurized water through the air turbine pump, which is controlled by expulsion valve. The mathematical model is derived to estimate the dynamic characteristics of the system, and the important design parameters are derived by using simulations. The computer simulation results show the dynamic characteristics and the possibility of control for underwater launch system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.9
• /
• pp.1688-1693
• /
• 2007

The aim of this paper is to develop and verify the system which can detect heart rate during exercise by using conductive fabric electrode and transportable measurement module. The experiment was performed under 4 conditions(resting, walking, jogging, running) and 18 subjects data are used. By using the ECG measurement system used in cardiac stress testing as reference value in order to verify the accuracy of the developed system, the relative error and correlation coefficient was calculated for each subject at every 3 seconds. The results have shown that the high correlation between the developed system and the reference system for detecting heart rate during exercise. Relative error and correlation coefficient are 2.27% and 0.9877, respectively. 7 subjects data are omitted in these calculations because of severe noises. Therefore, it is expected that this system could be used as a health monitoring system in ubiquitous environment in the future.

• Asia pacific journal of information systems
• /
• v.4 no.2
• /
• pp.83-130
• /
• 1994

Software development of large scale program such as Operating System or University Total Information System is lengthy and costly process. In order to reduce cost, time and risk, there is currentry general acceptance of the need for Software Reuse System during the whole development cycles. In this paper, (from a practical point of view), the problem of existing reuse system methodology is analyzed and an implement method of software reuse system is presented. Also using this method Application Program Reuse System(APRS) which supports all phase of software life cycles is designed and implemented. This application program reuse system which is based on common language is considerably shown to reduce communication Error of requirement specification between systems analyst and end-user.

• New & Renewable Energy
• /
• v.6 no.2
• /
• pp.19-26
• /
• 2010

Experiences in wind farm operation are very limited in Korea, and the foundation for setting standards in power system connection is weak. Therefore, connection and operation standards for wind farms in other countries must be reviewed and power system operation criteria need to be established in order to set up connection standards and optimal operation plans according to the Jeju power system. In this study, reactive power control characteristics of a wind farm were analyzed using a wind farm model of the Jeju power system to propose power system connection operation standards for wind generation within the Jeju power system. Also, change in characteristics of the power system for the application of each reactive power control standard was confirmed, and the results were verified through trial tests arm was analyzed.