• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.2
• /
• pp.247-254
• /
• 2010

In this paper, I propose the modular support of IT small companies that assigns specialist on each module and create the module corresponding to R&D processes to small companies in order to support technical difficulties arising in a R&D process of IT small companies. The number of applied target companies is 149 IT small companies and altogether 45 specialist who had supported 10 modules. As a result of observing for two years, I identified that the system helps the technical difficulties.

• International Journal of Aerospace System Engineering
• /
• v.4 no.2
• /
• pp.5-9
• /
• 2017

In a pressurized fuel supply system of aircraft, a flow passage opening device is required to keep fuel continuously transferred from one tank to the other. The device utilizes balancing weights in order to follow up an acceleration at special conditions such as negative g. It is very difficult to test the device in a real high-speed and high-altitude test since severe test conditions and expensive supports are needed. Therefore, this paper deals with performance analysis of a flow passage opening device through low speed aircraft captive flight tests (CFT) including roll and negative-g maneuvers. It is shown that balancing weights in the device can open the passage in accordance with fuel position.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.6
• /
• pp.58-64
• /
• 1997

The wavelengt lockin gsystem of the optical fabry-perot filter theoretially derived and experimentally realized by using the ithering method in order to compensate the laser wavelength drift increasing the BER of the WDM system. The deviation between the laser wavelength and the optical filter center wavelength is compensated by applying a suitable voltage to the PZT. Accordingly, the laser wavelength selected by the fabry-perot filter always maintains the condition of maximum transmission powr. A wavelength locking system has been demonstrated using a fiber fabry-perot filter with a free spectral range of 80nm and an FWH of 1nm. The voltages of the sine wave generated for dithering was 20mV and 10mV, the frequency was 2kHz and center wavelength of the tunable laser was 1550nm. In this paper, the locking system have 20ms of locking time and 2nm of locking range.

• The Korean Journal of Emergency Medical Services
• /
• v.16 no.2
• /
• pp.53-66
• /
• 2012

Purpose : Emergency medical services in China are increase in demand by people and under the greater pressure than ever before. So it is, necessary to advance the pre-hospital system in order to promote the development of emergency medical services. Methods : This is based on China-related articles, books, journals, reports, statistical data and other literature. Results : First, pre-hospital emergency medical care with the introduction of specialist training program should be established. Second, to strengthen pre-hospital emergency services and to develop the EMS guidelines. Third, the "120" reporting systems unification and awareness activation. Fourth, the preparation of the EMS facilities equipment system. Fifth, the rapid transport system establishment to the selected medical institutions. Conclusion : It is necessary to strengthen the emergency medical personnel at the scene, rapid transport, rapid patient triage and to improve the survival rate of the patients.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.489-490
• /
• 2007

This paper is intended to trace and management of a medical specimen and its report in a hospital. To avoid missing and decaying specimen and to establish of order in the circulation of specimen, at the moment sampling, RFID tags for each are on examiner. And then, specimen is monitored easily, quickly and, correctly. We developed implementation LIS system has better CQI (Continuos Quality Improvement) using RFID and XML, ADO.net, ASP.net, C# 2.0. RFID technology replaces to an existing the bar-code system. Also for more convenience, we used a PDA-RFID module. The LIS system consists of main sorrel, SQL 2005, event display and analysis web page developed using asp.net 2.0 and sharing specimen data information using XML technology.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.238-243
• /
• 2013

In this paper, a novel approach for optimized installation and operations of battery energy storage system (BESS) and electric double layer capacitor (EDLC) modules for the renewable energy based intermittent generation is presented for them to be connected with an electric power grid. In order to make use of not merely the high energy density of battery but also the high power density of EDLC modules, it is very useful to devise the hybrid system which combines BESS and EDLC modules. The proposed method adopts the linear programming to calculate the optimized capacity as well as the quadratic programming to transmit the optimal operational signals to BESS and EDLC modules. The efficiency of this methodology will be demonstrated in the experimental study with the real data of wind speed in Texas.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.6
• /
• pp.274-283
• /
• 2005

This paper presents a new method to derive energy function based on vector product. Using this method, an energy function to consider transfer conductances and capacitors is derived. Then we recommend a voltage collapse criteria to predict the voltage collapse in power systems by using the energy margin derived by the proposed energy function. This energy function is applied to a 2-bus power system reflecting transfer conductances and capacitors. We show that the energy function derived based on vector product can be applied in order to analyze power system stability and the energy margin can be utilized as a criterion of voltage collapse by simulation for the 2-bus system.

• Smart Structures and Systems
• /
• v.21 no.2
• /
• pp.139-149
• /
• 2018

Understanding the current status of a construction project is necessary to achieve successful on-site management. Real-time information delivery is a major concern for construction industry practitioners in order to expedite decisions and discussions. We propose the use of a first personal view (FPV) system of a quadcopter drone as a tool for monitoring on-site status and communicating between construction participants. The most important function of the drone FPV system is its ability to visually monitor construction site situations in real time. An on-site management system process is developed, verified, and applied to several construction work tasks after determining factors that affect efficient construction management. The proposed system is expected to assist the construction manager in achieving high efficiency.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.3
• /
• pp.36-42
• /
• 2006

The analytical realization of uncoupled system was introduced in this study using times series and its spectrum analysis. The ARMAX spectra of time series methods were compared with the conventional FFT spectrum. Also, the response of second order system uncoupled was solved using the Runge-Kutta Gill method. In this numerical analysis, the displacement, velocity and acceleration were calculated. The displacement response among them was used for the power spectrum analysis. The ARMAX algorithm in time series was proved to be appropriate for the mode estimation and spectrum analysis. Using the separate response of first and second mode, each modes were calculated separately and the response of mixed modes was also analyzed for the mode estimation using several time series methods.

• International Journal of Aerospace System Engineering
• /
• v.2 no.1
• /
• pp.38-42
• /
• 2015

This work is to propose a structural design and analysis procedure for development of the low noise 1kW class small wind turbine system which will be applicable to relatively low speed region like Korea and for the domestic use. The proposed structural configuration has a sandwich composite structure with the E-glass/Epoxy face sheets and the Urethane foam core for lightness, structural stability, low manufacturing cost and easy manufacturing process. Structural analysis including load cases, stress, deformation, buckling, vibration and fatigue life was performed using the Finite Element Method, the load spectrum analysis and Miner rule. In order to evaluate the designed structure, the structural test was carried out and its test results were compared with the estimated results. Moreover Investigation on structural safety of tower was verified through structural analysis by FEM.