• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_1
• /
• pp.517-527
• /
• 2023

Many techniques have been proposed and investigated for microlens array manufacturing in three-dimensional (3D) structures. We present fabricating a microlens array using selective laser etching and a CO₂ laser. The femtosecond laser was employed to produce multiple micro-cracks that comprise the predesigned 3D structure. Subsequently, the wet etching process with a KOH solution was used to produce the primary microlens array structures. To polish the nonoptical surface to the optical surface, we performed reflow postprocessing using a CO₂ laser. We confirmed that the micro lens array can be manufactured in three primary shapes (cone, pyramid and hemisphere). Compared to our previous study, the processing time required for laser processing was reduced from approximately 1 hour to less than 30 seconds using the proposed processing method. Therefore, micro lens arrays can be manufactured using our processing method and can be applied to mass productionon large surface areas.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.12
• /
• pp.2075-2077
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.9 s.252
• /
• pp.1160-1165
• /
• 2006

In this paper, the 2-dimensional uniaxial force sensors array is introduced to detect the distributed force using fiber Bragg gratings. Uniaxial force transducer was designed to avoid the chirping and micro bending which degrade the performance of the sensor. The Brags wavelength shift of the sensor was estimated using the finite element analysis. Using this uniaxial force sensor, the uniaxial force sensors array $(3{\times}3)$ was fabricated, and the Performance of this sensors array was evaluated. The Presented sensors may has very simple configuration and its wiring is very simple compared with any other force sensors arrays.

• Journal of Digital Convergence
• /
• v.13 no.2
• /
• pp.193-204
• /
• 2015

An array DBMS has been expected widely from scientists because it is convenient to store and analyze the data of array type. In this paper, we describe how to handle satellite remote-sensing images in the array DBMS. However, previous works in their visualization have two problems as follows. First, the images are visualized as a state of distorted by the curvature of the earth. Second, it is difficult to apply the results of visualization by pre-written queries to other analyses. Therefore, this paper proposes a three dimensional visualization method of satellite remote-sensing images, not traditional 2D visualization. Our research contents are as follows. First, we describe how to store, process, and analyze the satellite remote-sensing images in the array DBMS. Second, we propose a three-dimensional visualization method for their processed outputs. Lastly, our contributions can be summarized that we propose a method of handling satellite remote-sensing images in the array DBMS and their 3D visualization techniques. It is also expected that their use be available widely in many industrial areas.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2004.05a
• /
• pp.47-47
• /
• 2004

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.28-29
• /
• 2004

Optical wireless mobile communications have the potential to provide wide bandwidth and security . We have proposed and designed the 2-dimensional tracking optical receiver systems for optical wireless mobile communication. The receiver system consist of 4${\times}$4 photodiode array can receive optical signal from the transmitter. The room size is 5${\times}$5m$^2$ and the room height is 3m.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.11a
• /
• pp.43-44
• /
• 2015

LTE-Advanced system has been deployed with 2 and 4 transmission antennas (Tx) while the specification supports up to 8Tx. Due to deployment space, antenna dimension and complexity, the needs of deploying 8Tx system has not been motivated by operators. Recently, three dimensional (3D) beamforming with active antenna has attracted significant attention in the wireless industry. By incorporating 2D active array into LTE-A systems, the system offers freedom in controlling radiation on elevation and horizontal dimension. When the number of antennas increases in the form of 2D arrangement, spatial separation can be realized simultaneously in horizontal and elevation domain and vertical beam-steering can increase SINR of UEs in high floors. In this paper, we study the system operations and implementations for supporting 3D beamforming with 8Tx antennas. In our schemes, by reusing the conventional CSI feedback framework, the system can operate 2D active array without harming the backward compatibility. Evaluation results show that 3D beamforming provides capacity boosting over the conventional 2D beamforming systems while keeping same antenna structure.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.4
• /
• pp.127-135
• /
• 1994

In this paper we propose an EWLD(Enhanced Weighted Levenshtein Distance) algorithm to organize code-string pattern matching linear array processor based on the mappting to an one-dimensional array from a two-dimensional matching matrix, and design a processing element(PE) of the processor, N PEs are required instead of NS02T in the processor because of the mapping. Data input and output between PEs and all internal operations of each PE are performed in bit-serial fashion. The bit-serial operation consists of the computing of word distance (WD) by comparison and the selection of optimal code transformation path, and takes 22 clocks as a cycle. The layout of a PE is designed based on the double metal $1.5\mu$m CMOS rule. About 1,800 transistors consistute a processing element and 2 PEs are integrated on a 3mm$\times$3mm sized chip.

• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.282-285
• /
• 2010

We printed a one-dimensional array of metallic wires and a two-dimensional array of metallic split ring resonators on a photo-paper by using a high-dots-per-inch resolution printer and an ink with silver nano-particles. The printed sample sizes are $1.0{\times}1.0cm^2$. The transmission measured by a terahertz time domain spectroscopy system shows that the arrays of wires and split ring resonators could act as polarizers and band-stop filters, respectively, in a terahertz frequency region.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.2
• /
• pp.31-38
• /
• 2010

It is difficult to design accurately the bandgap of metamaterial depending on metamaterial pattern and array configuration. In this paper, we propose a design method for the wanted bandgap frequency using any metamaterial pattern in 2 dimensional array. Metamaterial structure is consisted of periodic array. Therefore the calculation area in FDTD(finite difference time domain) method can be reduced by applying the periodic boundary condition to 2-D metamaterial array. The method for design and calculation the L and C values by using 2-D is also considered. So it can be designed more accurately and rapidly. For example, we designed metamaterial square pattern array in 5 GHz, and compared with the 1-D metamaterial pattern using analysis method in microstrip line. As a result, we found that the accuracy of this proposed method can be incresed to 14.7%.