• Title/Summary/Keyword: 2 성분 혼합물

Search Result 232, Processing Time 0.028 seconds

Prediction of Autoignition Temperature of n-Decane and sec-Butanol Mixture (n-Decane과 sec-Butanol 혼합물의 최소자연발화온도의 예측)

  • Ha, Dong-Myeong
    • Fire Science and Engineering
    • /
    • v.26 no.3
    • /
    • pp.85-90
    • /
    • 2012
  • The autoignition temperature (AIT) of a material is the lowest temperature at which the material will spontaneously ignite. The AIT is important index for the safe handling of flammable liquids which constitute the solvent mixtures. This study measured the AITs of n-Decane+sec-Butanol system by using ASTM E659 apparatus. The AITs of n-Decane and sec-Butanol which constituted binary system were $212^{\circ}C$ and $447^{\circ}C$, respectively. The experimental AITs of n-Decane+sec-Butanol system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D. (average absolute deviation).

Measurement and Evaluation of Flash Point for the DMF Contained Organic Solvent Mixtures (DMF함유 혼합 유기용제에 대한 인화점의 측정과 평가)

  • Lee, Jung-Suk;Han, Ou-Sup;Lee, Keun-Won
    • Fire Science and Engineering
    • /
    • v.33 no.4
    • /
    • pp.9-15
    • /
    • 2019
  • The flash points of DMF based organic solvent mixtures used in the synthetic leather manufacturing process were measured. The test group was composed of seven types of solvent mixtures, which included DMF, toluene, and MEK. Each flash point was tested according to the international standard test methods of KS M 2010. The flash points were then predicted using some prediction models and compared with the measured data. From the analysis results, the binary mixtures with a mole ratio of less than approximately 0.7 showed that the measured values were under 25 ℃. This showed that the expectation for the flammable risk lowering effects due to the mixing of high flash point materials was reduced. In addition, the predicted values were evaluated using the average absolute deviation (A.A.D). The results showed that the Le Chatelier's models had an "A.A.D" of 1.95 ℃ and were the closest to the measured values.

Development of Absorption fluid with Water-Lithium bromide-Lithium nitrate system (Water-Lithium bromide-Lithium nitrate계 흡수용액 개발)

  • 오영삼;주우성;박달령;조원일;백영순;방효선
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 1996.10b
    • /
    • pp.190-192
    • /
    • 1996
  • 본 연구는 기존의 Water-Lithium Bromide(H2O/LiBr) 용액에 비해 부식성이 낮은 Water-Lithium bromide-Lithium Nitrate계(H2O/LiBr-LiNO3)용액의 용해도, 증기압, 점도, 표면장력 등의 물리적 성질을 조사하였다. 또한 용해도가 가장 큰 최적의 혼합 몰비를 구하여 증기압 및 점도, 표면장력등의 물성을 구함으로써 흡수식 냉온수기용 홉수제 개발의 기본 자료를 확보하였다. 이러한 연구 결과로부터 다성분 Lithium 염 혼합물계로 이루어진 흡수용액 개발의 기초자료로 이용하고자 한다.

  • PDF

Effect of Black Garlic and Mugwort Extracts on Lipids Profile during Restraint Stress (흑마늘과 쑥 추출물이 구속스트레스를 가한 흰쥐의 체내 지질 성분에 미치는 영향)

  • Lee, Soo-Jung;Kang, Min-Jung;Shin, Jung-Hye
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.42 no.4
    • /
    • pp.577-586
    • /
    • 2013
  • This study investigated black garlic and mugwort extracts have anti-stress activity. The antioxidant activities of extracts from black garlic (BEP), mugwort (MEP), and three mixtures (MPA, 95:5; MPB, 90:10; MPC, 85:15, w/w% for BEP and MEP, respectively) were tested in vitro. DPPH and ABTS radical scavenging activities for the mixtures (MPA, MPB and MPC) were significantly elevated in a dose-dependent manner by the amount of mugwort extract. A restraint stress was imposed on six groups of Sprague-Dawley rats supplemented with an AIN-93 diet (RSC) or one of five kinds of hot water extract drinks containing (black garlic, RS1; mugwort, RS2; and mixtures of black garlic : mugwort at 95:5, RS3; 90:10, RS4, and a mixture of black garlic : mugwort : apple extract : xylitol=90.25:4.75:2:3, RS5; v/v%) for 4 weeks. The normal group was fed with the AIN-93 diet and not exposed to restraint stress. Food intake was higher in the group fed with garlic extract (RS1), while the body weight gain and food efficiency ratio did not significantly change. The total serum cholesterol content in the RS1 and RS2 groups was significantly lower than the RSC group (control), and the RS5 group was not significantly different compared to the RS3 group. The serum triglyceride content was significantly higher RS3~RS5 groups than RS1 and RS2 groups. In terms of HDL-C and LDL-C contents, AI and CRF in the serum were not significantly different between RS3 and RS5 groups. AST and ALP activities of RS1~RS5 groups were significantly lower than the RSC group. The liver total lipid and cholesterol contents of RS1~RS5 groups were significantly lower than RSC group, and triglyceride content was significantly lower in the RS1 group. Glycogen in the liver tissue was significantly higher in the RS2 and RS3 group compared to the RSC group. These results show that the intake of a mixture of black garlic and mugwort extracts may be effective in the alleviation of hyperlipidemia caused by restraint stress.

SiC aggregates synthesized from carbonized rice husks, paper sludge, coffee grounds, and silica powder (탄화왕겨, 제지슬러지, 커피찌거기 및 실리카 혼합물로부터 탄화규소 결정체 합성)

  • Park, Kyoung-Wook;Yun, Young-Hoon
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.29 no.2
    • /
    • pp.45-49
    • /
    • 2019
  • Relatively fine silicon carbide (SiC) crystalline aggregates have been synthesized with the carbonized rice husks, paper sludge, coffee grounds as the carbon sources and the silica powder. The main reaction source to obtain silicon carbide (SiC) aggregates from the mixture of carbon sources and silica was inferred as the gaseous silicon monoxide (SiO) phase, being created from this mixture through the carbothermal reduction reaction. The silicon carbide (SiC) crystalline aggregates, fabricated from the carbonized rice husks and paper sludge, coffee grounds and silica ($SiO_2$) powder, were investigated by XRD patterns, FE-SEM and FE-TEM images. In these specimens, obtained from the carbonized rice husks, paper sludge and silica, XRD patterns showed rather high strong peak of (111) plane near $35^{\circ}$. The FE-TEM images and patterns of specimens, synthesized from carbonized rice husks, paper sludge, coffee grounds and silica under Ar atmosphere, showed relatively fine particles under $1{\mu}m$ and crystalline peak (110) of silicon carbide (SiC) diffraction pattern.

Pre-service Chemistry Teachers’ Understanding of the Boiling Process of a Liquid Mixture (액체 혼합물의 끓음에 대한 예비 화학교사의 이해)

  • Park, Kira;Yoon, Heesook
    • Journal of the Korean Chemical Society
    • /
    • v.59 no.5
    • /
    • pp.454-465
    • /
    • 2015
  • The goal of this study is to investigate pre-service chemistry teachers’ understanding of the boiling process of a liquid mixture. We surveyed 65 students in the chemistry program of the College of Education about the boiling point of a 50%(by mole) ethanol aqueous solution and the temperature changes during heating. We then interviewed 9 of these students. According to the survey results, the percent of the pre-service teachers who thought that the boiling point of the ethanol solution would be ‘between the boiling points of ethanol and water (78-100 ℃)’ and ‘the same as that of ethanol’ were 52.3% and 35.4%, respectively. The majority of those who stated the former explained that the boiling point of the ethanol solution increased due to the effects of attraction or blocking by water molecules. Most of those who believed the latter explained that physical properties such as the boiling point would not be changed by the addition of water. With regard to the temperature change during heating, 69.2% of the teachers thought that the temperature would increase gradually while boiling, which some thought resulted from the increasing amount of water in the solution as the ethanol boiled off. Others thought that two temperature plateaus would be observed as each component of the liquid mixture underwent phase transition at its specific boiling point. When asked about the particle model of the gas phase during the boiling and evaporation process, some students drew both ethanol and water during evaporation but only ethanol when boiling. We discussed several alternative concepts of pre-service chemistry teachers about the boiling process of liquid mixtures and ways to improve their understanding.

Experimental Study on N2 Impurity Effect in the Pressure Drop During CO2 Mixture Transportation (CO2 파이프라인 수송에서의 N2 불순물이 압력강하에 미치는 영향에 대한 실험적 연구)

  • Cho, Meang-Ik;Huh, Cheol;Jung, Jung-Yeul;Baek, Jong-Hwa;Kang, Seong-Gil
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.15 no.2
    • /
    • pp.67-75
    • /
    • 2012
  • Carbon-dioxide capture and storage (CCS) process is consisted by capturing carbon-dioxide from large point source such as power plant and steel works, transporting and sequestrating captured $CO_2$ in a stable geological structure. During CCS process, it is inevitable of introducing impurities from combustion, capture and purification process into $CO_2$ stream. Impurities such as $SO_2$, $H_2O$, CO, $N_2$, Ar, $O_2$, $H_2$, can influence on process efficiency, capital expenditure, operation expense of CCS process. In this study, experimental apparatus is built to simulate the behavior of $CO_2$ transport under various impurity composition and process pressure condition. With this apparatus, $N_2$ impurity effect on $CO_2$ mixture transportation was experimentally evaluated. The result showed that as $N_2$ ratio increased pressure drop per mass flow and specific volume of $CO_2-N_2$ mixture also increased. In 120 and 100 bar condition the mixture was in single phase supercritical condition, and as $N_2$ ratio increased gradient of specific volume change and pressure drop per mass flow did not change largely compared to low pressure condition. In 70 bar condition the mixture phase changed from single phase liquid to single phase vapor through liquid-vapor two phase region, and it showed that the gradient of specific volume change and pressure drop per mass flow varied in each phase.

Separation and Recovery of Indole from Model Coal Tar Fraction by Batch Cocurrent 5 Stages Equilibrium Extraction (회분 병류 5단 평형추출에 의한 모델 콜타르 유분 중에 함유된 Indole의 분리 및 회수)

  • Kim, Su Jin;Chun, Yong Jin;Jeong, Hwa Jin
    • Applied Chemistry for Engineering
    • /
    • v.18 no.2
    • /
    • pp.168-172
    • /
    • 2007
  • The separation of indole from a model mixture comprising four kinds of nitrogen heterocyclic compounds [indole (In), quinoline (Q), iso-quinoline (iQ), quinaldine (Qu)], three kinds of bicyclic aromatic compounds [1-methylnaphthalene (1MN), 2-methylnaphthalene (2MN), dimethylnaphthalene (DMN)], biphenyl (Bp) and phenyl ether (Pe) was examined by batch cocurrent 4 stages equilibrium extraction. The model mixture used as a raw material in this work was prepared according to the components and compositions contained in coal tar fraction (the temperature ranges of fraction: $240{\sim}265^{\circ}C$). An aqueous solution of formamide was used as a solvent. Indole was recovered more than 99% through 4 stages of the equilibrium extraction. The range of selectivity of indole in reference to DMN obtained through the 5 stages equilibrium extraction was found to be 63~118. The process for separation and recovery of indole contained in coal tar was studied by using the experimental results obtained from this work and the previous work.

Isothermal Vapor-liquid Equilibria for the Binary Mixtures of 3-Methylpentane with Ethylene Glycol Monopropyl Ether and Ethylene Glycol Isopropyl Ether (3-메틸펜테인과 에틸렌 글리콜 모노프로필 에테르 및 에틸렌 글리콜 아이소프로필 에테르 혼합물에 대한 2성분계 등온 기-액 상 평형)

  • Hyeong, Seonghoon;Jang, Sunghyun;Kim, Hwayong
    • Korean Chemical Engineering Research
    • /
    • v.53 no.3
    • /
    • pp.302-308
    • /
    • 2015
  • Isothermal vapor liquid equilibria for the binary system of 3-methylpentane with ethylene glycol monopropyl ether ($C_3E_1$) and ethylene glycol isopropyl ether ($iC_3E_1$) were measured at 303.15, 318.15, and 333.15K. In our previous work, phase equilibria for the binary system of $C_3E_1$ mixtures were investigated according to the chain length of alkane, alcohol or those isomer. But in this study, we discussed the different effect of $C_3E_1$ and its isomer, $iC_3E_1$, on the phase equilibria. The measured systems were correlated with a Peng-Robinson equation of state (PR EOS) combined with Wong-Sandler mixing rule for the vapor phase, and NRTL, UNIQUAC, and Wilson activity coefficient models for the liquid phase. All the measured systems showed good agreement with the correlation results. And it was found that the phase equilibria showed very little difference between the $iC_3E_1$ mixture system and the $C_3E_1$ mixture system.

Convergence Study on the Optimization for Suppression of Starch Hydrolysis using Rutin, Quercetin and Dietary Fiber Mixture Design (루틴, 퀘르세틴, 식이섬유 혼합물 설계를 이용한 전분소화 지연 효과의 최적화에 대한 융합 연구)

  • Oh, Imkyung;Bae, In Young
    • Journal of the Korea Convergence Society
    • /
    • v.11 no.5
    • /
    • pp.35-41
    • /
    • 2020
  • This study was conducted to develop the efficient system for starch hydrolysis suppression using rutin, quercetin and dietary fiber through the statistical mixture design. The three components were replaced with wheat flour at the level of 10% and the mixed gel with three components was characterized by in vitro starch digestion. The mixture design was applied by simplex-centroid experimental model. The quadratic model (R2=0.86) was well fitted and the obtained regression equation indicated that the significant positive effects was observed in the quercetin and fiber mixture. Based on the statistical results, the best mixing ratio of quercetin and fiber was 72: 28 that led to the lowest predicted glycemic index (pGI). Their interactions on the pGI of starch digestibility were clearly visualized in the 3D surface plot. These results suggested that the mixture of quercetin and fiber interact strongly with wheat flour, consequently retarding starch hydrolysis by 15%.