• Title/Summary/Keyword: 2탐침법

Search Result 73, Processing Time 0.035 seconds

The Effect of Splinting with Concomitant Root Planing;Clinical and Digital Subtraction Radiographic Study (치근활택술과 스프린트 병행처치의 효과에 관한 연구;디지털 공제 촬영술을 이용한 임상적 연구)

  • Lee, Ji-Young;Kye, Seung-Bum;Kim, Won-Kyoung;Lee, Yong-Moo;Ku, Young;Ryu, In-Chul;Chung, Chong-Pyoung;Choi, Sang-Mook;Han, Soo-Boo
    • Journal of Periodontal and Implant Science
    • /
    • v.31 no.1
    • /
    • pp.207-227
    • /
    • 2001
  • 스프린트는 치주처지료에서 부가적 처치법으로 널리 사용되고 있으며, 한편, 디지털 공제 활영술은 기존방사선촬영술의 한계점을 극복하기 위해 기발된 새로운 방법이다. 이번 연구에서는 치근활택술 단독시행시와 스피린트 병행 처치시의 효과를 임상적, 방사선학적으로 비교하였다. 중정도의 성인성 치주염을 가진 20명의 환자를 대상으로 하되 10명은 치근활택술 단독으로, 나머지 10명은 스프린트 병행처치로 처치하였다. 임상적, 방사선학적인 평가는 처치전, 처치후 6개월에 행하고, 임상적 평가의 경우 3개월에 추가로 실시하였다. 이번 연구에서 사용된 임상 지수로는 치태지수, 치은지수, 치은퇴축, 치주낭깊이, 임상부착수준, 임상부착증가, 탐침시출혈, 치아동요도 등이며, 방사선학적 평가는 기존 방사선촬영술에 의한 방법과 디지털 공제촬영수렝 의한 방법으로 행하였다. 디지털 공제 촬영술에 의한 평가시, 영상은 Digora 프로그램에 의해 획득하고 Emago 프로그램으로 처리 하여 다음과 같은 결론을 얻었다. 1. 처치후 3개월에 치태지수, 치은지수, 치은퇴축, 치주낭깊이, 임상적부착수준, 탐침시 출혈 등의 임상지수들이 변했으며, 특히 이러한 변화는 치주낭깊이, 치은퇴축, 탐침시출혈에서 유의성이 있었다. ( p<0.05 ) 그러나 두군간 차이는 인정되지 않았다. ( p>0.05 ) 2. 처치후 6개월에도 치태지수, 치은지수, 치은퇴축, 치주낭깊이, 임상적부착수준, 탐침시출혈, 치아동요도 등의 임상지수들이 변했으며, 특히 이러한 변화는 치주낭깊이, 치은퇴축, 탐침시출혈, 치태지수, 치아동요도에서 유의성이 있었다. ( p<0.05 ) 그러나 두 군간 차이는 인정되지 않았다. ( p>0.05 ) 3. 켄달 상관분석시, 임상적 평가와 기존 방사선 촬영술에 의한 평가사이의 관련성을 낮았으며 거의 0에 가까운 수치를 보였으며 (r=0.110, p=0.639 ) 임상적 평가와 디지털 공제 방사선 촬영술에 의한 평가사이에서 약간 높은 관련성을 보였다. ( r=0.257, p=0.315 ) 즉 치주치료후의 골변화는 디지털 공제 방사선 촬영술에 의한 평가시 기존 방사선 사진보다 임상적 부착증가와 더욱 긴밀한 관련성을 보여준다. 이상의 결과로 볼 때, 스프린팅 처치는 치주 치료에 있어 치근활택술에 부가적 표과를 제공하지 못한다.

  • PDF

강자성체를 이용한 이중구조의 고균일도 플라즈마 발생장치

  • Kim, Hyeon-Jun;Jo, Jeong-Hui;Chae, Hui-Seon;Jo, Seong-Won;Jeong, Jin-Uk
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.492-492
    • /
    • 2013
  • 반도체 공정을 위한 원격 유도 결합 플라즈마(remote ICP)에서 플라즈마 균일도를 향상하는 연구를 진행하였다. 본 연구에서는고 균일도 플라즈마 발생을 위해 단면적이 다른 2개의 반응 용기를 상부와 하부에 설치하였으며, 각각의 반응 용기 외곽에 방전 코일이 위치하도록 구성하였다. 상부의 반응 용기는 외곽에 유도 코일을 권선하였고, 하부의 반응 용기는 고밀도의 플라즈마 생성을 위해 강자성체를 이용하여 권선하였으며, 강자성체는 쿼츠관을 둘러 싼 구조로 되어 있다. 0.5-1 Torr 공정 압력 범위의 아르곤 기체에서 전체 2500 W의 전력을 인가하였고, 임피던스 정합회로로부터 각각 병렬로 연결된 방전 코일에 전력이 분배되어 인가되는 구조로 설계하였다. 반도체 공정을 위한 플라즈마 균일도를 분석하기 위해 wafer의 위치에서 부유 탐침법을 적용하여 wafer 중심부로부터 반경 방향으로 위치를 변화시키며 플라즈마 밀도와 전자온도를 측정하였다. 동일한 공정 조건에서 하부에 강자성체를 사용하여 권선한 이중 구조의 경우 하나의 방전 코일을 이용한 구조 대비 플라즈마 밀도가 증가하였고, 플라즈마 균일도가 크게 향상됨을 보였다. 강자성체를 이용한 하부 코일에 의해 wafer 외곽 부분의 밀도가 높은 분포를 갖는 플라즈마가 형성되고, 상부의 유도코일에 의해 wafer 중심부에 밀도가 높은 플라즈마가 형성되어 wafer의 플라즈마 균일도가 개선된다. 또한, 강자성체를 이용한 하부 코일에 의해 고밀도의 플라즈마가 형성되므로 반도체 공정을 위한 장비에서 플라즈마 균일도의 개선과 밀도의 향상으로 대면적 Dry Strip 공정 (450mm)에 적용 가능하다.

  • PDF

Coated Wire Lead(Ⅱ) Ion-Selective Electrodes based on Crown Ethers (Crown Ether를 이용한 탐침형 납 이온선택성 전극)

  • Jang, Mi Kyeong;Ha, Kwang Soo;Seo, Moo Lyong
    • Journal of the Korean Chemical Society
    • /
    • v.41 no.7
    • /
    • pp.337-342
    • /
    • 1997
  • Acryloylmethylbenzo-15-crown-5 was prepared from the reaction of 4'-hydroxymethylbenzo-15-crown-5 with acryloyl chloride. And, poly(acryloylmethylbenzo-15-crown-5) [poly(AMB15C5)] was synthesized by radical polymerization using AIBN as initiator in benzene. Coated wire lead(II) ion-selective electrodes ($Pb^{2+}$-CWISEs) using either poly(AMB15C5) or B15C5 as neutral carrier were prepared, respectively. $Pb^{2+}$-CWISEs gave linear responses with slopes of 28$\pm$ 1mV per decade within the concentration range of $10^{-5} M{\sim}10^{-1}$ M, respectively. Also, the detection limits were $10^{-6}$ M and response times were either 3 or 5 min. for B15C5 and poly(AMB15C5), respectively. $Pb^{2+}$-CWISE base on B15C5 was rather unstable than poly(AMB15C5)'s due to solubility of the B15C5 in water. The selectivity coefficients of a variety of interfering ions such as $Mg^{2+},\; Ca^{2+},\; Co^{2+},\; Ni^{2+},\; Cu^{2+},\; Zn^{2+}$ and $Cd^{2+}$ were small ($10^{-4}{\sim}10^{-5}$), while those of $Na^+$ and $K^+$ were large (0.1∼0.01). In addition, the electrode responses depended upon the pH of test solution and the composition of the membrane. In the range pH 3∼6 of test solution, potentials of Pb2+-CWISEs were hardly changed. The optimal contents of B15C5 and poly(AMB15C5) were 7.7 wt% and 13.1 wt%, respectively.

  • PDF

Study on the formation of Ta-silicides and the behavior of dopants implanted in the poly-Si substrates (Dopant가 주입된 poly-Si 기판에서 Ta-silicides의 형성 및 dopant 의 거동에 관한 연구)

  • Choi, Jin-Seok;Cho, Hyun-Choon;Hwang, Yu-Sang;Ko, Chul-Gi;Paek, Su-Hyon
    • Korean Journal of Materials Research
    • /
    • v.1 no.2
    • /
    • pp.99-104
    • /
    • 1991
  • Trantalum thin films have been prepared by DC sputtering onto As, P, and $BF_2$-implanted ($5{\times}10^15cm^-2$) poly-silicon. The heat treatments by rapid thermal annealing(RTA) have been applied to these samples for the formation of silicides. We have studied the application possibility of Ta-silicide as gate electrode and bit line. The silicide formation and the dopant diffusion after the heat treatment were investigated by various methods, such as four-point probe, X-ray, SEM cross sectional views, ${\alpha}$-step, and SIMS, The tantalum disilicide($TaSi_2$) are formed in the temperature above $800^{\circ}C$, and grown in colummar structure. $TaSi_2$ has a good surface roughness, having range from $80{\AA}\;to\;120{\AA}$, and implanted dopants are incoporated into the $TaSi_2$ layer during the RTA temperature.

  • PDF

Stydy of Pool Boiling under Steady State using Ultrasonic Measurement (초음파 측정법을 이용한 정상상태의 푸울비등 연구)

  • 장길홍
    • Journal of Ocean Engineering and Technology
    • /
    • v.6 no.2
    • /
    • pp.35-40
    • /
    • 1992
  • A recently developed new technique for measuring the fraction of wetted area has applied to pool boiling of water. The basis of the new applied technique of ultrasonic makes use of the reflection of ultrasonic from the vapour surface to measure the fraction of wetted area values. The results are the measured fraction of wetted area values in nucleate and transition boiling and the pool boiling curve for water under steady state conditions. The measurement of this paper shows a fraction of wetted areaf around 0.98 at the critical heat flux for water.

  • PDF

Evaluation of Surface Mechanical Properties of Electro-formed Fe-Ni-Co Thin Foil by Dynamic Nano-indentation and Finite Element Methods (Fe-Ni-Co 박판의 동적 나노 압침법과 유한 요소법에 의한 표면 기계적 특성 평가)

  • Gang, Bo-Gyeong;Choe, Yong
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2017.05a
    • /
    • pp.124-124
    • /
    • 2017
  • Fe-Ni-Co 합금 박막(<$100{\mu}m$)을 황화물계 용액에서 전주공정으로 제조하였다. XRF로 측정한 박판의 평균 조성은 Fe-34 wt.% Ni-3 wt.% Co 이다. AFM으로 측정한 표면 조도는 35.2 nm 이다. 표면의 나노 경도는 평균 5.4 GPa 이었다. Oliver 모델을 적용한 구리 박막의 탄성하강강성도는 약 75 이었다. Alekhin 모델을 적용한 구리 박막의 마찰계수, 피로한계는 각각 0.134, 0.027 이었다. 유한요소법으로 평가한 Berkovich 형 나노압침선단의 하중분포를 이차원 선형 및 비선형 해석하면 1 [mN]의 정적하중을 가한 Fe-Ni-Co 박막은 약 576 [mN]로 예측되었다. 압침선단의 하중집중정도는 표면탐침현미경으로 관찰한 압흔의 변형정도와 유사한 경향을 보였다.

  • PDF

Three-dimensional measurement of electron temperature and plasma density in coplanar AC plasma display panels (면방전 AC-PDP에서의 전자온도와 플라스마 밀도의 3차원 진단)

  • Jeong, S.H.;Moon, M.W.;Park, W.B.;Lee, J.H.;Lim, J.E.;Lee, H.J.;Son, C.G.;Lee, S.B.;Yoo, N.L.;Han, Y.G.;Oh, P.Y.;Ko, B.D.;Jeoung, J.M.;Seo, Yoon-Ho;Cho, Guang-Sup;Choi, Eun-Ha
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2005.05a
    • /
    • pp.139-141
    • /
    • 2005
  • 이번 실험에서는 변방전형 교류 PDP에서의 3차원적인 전자온도와 이온밀도의 측정을 마이크로 랑뮈르 탐침법을 통해 실험적으로 연구하였다. 스테핑 모터에 연결된 마이크로 랑뮈르 탐침은 20um씩 움직이며 탐침에 인가하는 플러스와 마이너스의 직류전압을 통해 I-V곡선을 구할 수 있고 이를 통해서 전자온도와 플라스마 밀도를 구할 수 있다. Ne+Xe(4%) 200Torr의 혼합가스에서 전극의 테두리를 따라(X축) 전자온도 및 플라스마 밀도를 측정한 결과 중앙지점에서와 전극의 경계지역에서 이온밀도는 $7.69{\sim}11.1{\times}10^{11}cm^{-3}$ 까지 측정되었다. 또한 전자온도는 플라스마 밀도와 균형적인 관계에 있다는 것은 주목할 만하다. 전자온도는 전극 사이의 중심에서 가장 적게 1.3 ~ 3.15eV까지 측정되었다. Y축으로 측정했을 경우 이온 밀도와 전자온도는 전극 갭 중앙에서부터 약 80um 떨어진 지점에서 서로 교차하며 증가 및 감소였으며 이온밀도는 $8.3{\sim}11.1{\times}10^{11}cm^{-3}$로 측정되었고 전자온도는 이와 균형적인 관계를 가지고 1.2~1.6eV로 측정되었다. 또한 이러한 특성은 AC PDP 에서 나타나는 줄무늬 현상과 관련이 있는 것으로 보인다. Z축으로 측정했을 경우 약 125um높이에서 가장 높게 측정되었으며 $1.1{\times}10^{12}cm^{-3}$정도로 측정되었다.

  • PDF

Prediction of Fatigue Life in 2 Ply Rubber/Cord Laminate (2층 고무/코드 적층판의 피로 수명 예측)

  • 임동진;이윤기;윤희석;김민호
    • Composites Research
    • /
    • v.16 no.3
    • /
    • pp.9-17
    • /
    • 2003
  • In order to simulate the crack connection between cords and the interply crack growth in the belt-layer of real tire, 2 ply rubber/cord laminate specimens with exposed edges were tested in 4~11mm displacement control. Measurement of the crack connection is evaluated when crack reaches the half of the length between 45$^{\circ}$ aligned cords, and the amount of the crack growth is measured by the steel probe method. 2 dimensional analytic modeling was performed to simulate the crack connection between cords at the exposed edges. Also, the theoretical life of the specimens was calculated from the crack connection life between cords(critical value) and from the critical value to the final failure by the use of Tearing energy(T); the strain energy release per unit area of one fracture surface of a crack. Then, theoretical life was compared with those of experiments. The life prediction up to the critical value has about 20% error compared to experimental life, and up to the final failure about 65% error. Therefore, total theoretical life has about 45% error compared to the experimental life, which is conceivable in the case of rubber.

Identification of Introduced Gene and Its Expression and Gene Stability Assessment for Event Selection of Genetically Modified Plant toward Approval: Cucumber Mosaic Virus Resistant Hot Pepper (상업용 유전자 변형작물 이벤트 선발을 위한 도입유전자 확인, 발현 및 세대간 안정성 평가 : 오이모자이크바이러스 저항성 GM 고추)

  • Kang, Seung-Won;Han, Bal-Kum;Lee, Tae-Ho;Kim, Eun-Ji;Lee, Gung-Pyo
    • Horticultural Science & Technology
    • /
    • v.30 no.2
    • /
    • pp.192-200
    • /
    • 2012
  • For the development of genetically modified plants, it is important to verify various factors which potentially affect the risk assessment as well as to establish an experimental program to produce scientific and reliable data. However, it is a time and cost consuming process to develop GM plants as well as to prepare scientific and convincible data for government's approval. Therefore, using the transgenic hot pepper tolerant to a new CMV pathotype, we attempted to suggest few methodological procedures, such as probe saturation for southern blot analysis and RT-PCR and ELISA for expression analysis, for identification and stability evaluation of inserted gene in genetically modified plant which are required for submission for approval. Ten partially overlapped probes covering full length of inserted gene were produced. We could identify that the inserted gene was stacked as a single copy as well as no partial element existed. Also, we could identify the stability of the inserted gene stacked in hot pepper using probe saturation. In the expression analysis with RT-PCR and ELISA, we also could provide the stable expression of transcript and proteins in leaves and placenta and pericarp of fruits of the CMV-resistant hot pepper.

Study on SF6/O2 Plasmas for Copper Surface Characteristics (SF6/O2 플라즈마를 이용한 구리 표면 처리 후 표면 Corrosion 특성 연구)

  • Im, No-Min;Lee, Jun-Myeong;Lee, Jae-Min;Lee, Byeong-Jun;Gwon, Gwang-Ho
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2015.11a
    • /
    • pp.333-333
    • /
    • 2015
  • 본 연구에서는 디스플레이 패널 식각에 있어서 전극인 구리 박막 표면에 $SF_6/O_2$ 플라즈마 사용 시 발생되는 Corrosion 현상을 분석하기 위해 $SF_6/O_2$ 가스의 조성비를 변화하며 실험을 진행하였다. 유도결합 $SF_6/O_2$ 플라즈마를 이중 랭뮤어 탐침과 광 분광법을 이용한 플라즈마 진단을 통해 $SF_6/O_2$의 조성비의 변화에 따른 플라즈마 상태를 분석하고, $SF_6/O_2$ 플라즈마 조성비를 변화시켜 구리 박막의 표면을 처리한 후 발생되는 Corrosion과 Corrosion이 구리에 미치는 영향을 조사하기 위해 XPS, SEM, 4 point probe 등을 이용하였다.

  • PDF