• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.330-336
• /
• 2007

In this study, new dinuclear chiral Co (salen) complexes bearing $BF_3$ have been synthesized and their properties as the asymmetric catalyst have been examined. The NMR, UV and ESCA analyses were performed to determine the structure of synthesized catalysts. Their catalytic activity and selectivity have been demonstrated for the asymmetric ring opening of various terminal epoxides by hydrolytic kinetic resolution technology. The easily prepared dimeric complexes exhibited very high enantioselectivity for the asymmetric ring opening of epoxides with $H_2O$ nucleophile, providing enantiomerically enriched terminal epoxides (> 99 %ee). The dimeric structured chiral salen showed remakablely enhanced reactivity and may be employed substantially lower loadings than its monomeric analogues, and in addition no racemization happened during the separation of product epoxides. The system described in this work is very efficient for the sinthesis of chiral epoxide and 1,2-diol intermediates.

• Resources Recycling
• /
• v.27 no.2
• /
• pp.68-76
• /
• 2018

EAF (Electric arc furnace) dust is an important secondary resource such as zinc, lead, and iron. Recycling of EAF dust is benefit to solving disposal and environmental problems caused by the heavy metals entrained in the dust. In this study, pyrometallurgical treatment technology of EAF dust reviewed for the improvement of conventional process and development of new process. The existing technologies categorized into four groups: those by rotary kiln process, rotary hearth furnace (RHF) process, shaft type process, and reduction smelting process. The product of these processes are ZnO and Fe or slag as a waste. Their mechanisms for the production of ZnO from EAF dust were carbothermic reduction and oxidation of zinc gas with air.

• Applied Microscopy
• /
• v.29 no.3
• /
• pp.281-289
• /
• 1999

The stirred and thixoformed $SiC_p/AZ91HP$ Mg composites are studied on the basis of microstructural analysis using transmission electron microscopy (TEM). The products of interfacial reaction are identified as $Mg_2Si$, MgO and $Mg_{17}Al_{12}$ phases and the crystallized phases are found to be orthorhmbic $Al_6Mn$ and decagonal T phases. It is shown that $Mg_2Si$ and $Mg_{17}Al_{12}$ phases are found at the surface of $SiC_p$ and $Al_6Mn$ is found near interface and crystallized on the matrix. Phase identification is carried out by crystallographic work based on primitive cell volume, zero order Laue zone (ZOLZ) patterns and single convergent beam electron diffraction (CBED) patterns containing higher order Laue zone ring from a nanosized region.

• Korean Journal of Food Science and Technology
• /
• v.43 no.6
• /
• pp.742-746
• /
• 2011

To increase the quality of Korean traditional yakju, we prepared seed cultures by fermentation at $20^{\circ}C$ for 2 days after addition of 140% water, 3% nuruk and 1.5% yeast into cooked rice. After the 200% cooked rice, 120% water and 0.08% commercial saccharifying enzyme were added to seed cultures and fermented for 2 days at $20^{\circ}C$, wild ginseng was added and then further fermented for 5 days. Physicochemical properties of traditional yakju were investigated. Ethanol was produced (18.5%) by the addition of 1.2% wild ginseng. However, ethanol content was not increased by addition of microwave treated-wild ginseng and rice (either cooked rice or raw). The traditional yakju obtained by fermentation at $20^{\circ}C$ for 5 days, after 90 sec of microwave treated-wild ginseng was added into main fermentation broth, showed good total acceptability and also contained 791 ppm saponin.

• Korean Journal of Materials Research
• /
• v.5 no.1
• /
• pp.132-139
• /
• 1995

Tnermomechanical treatment consisting of homogenizing, hot and warm rolling were introduced to Al-MgCu-Mn alloys for obtaining superplasticity. The factors affecting the superplasticity of the alloys were investigated by optical and transmission electron microscopy. Large particles which had not been decomposed during homogenizing treatments remained stable in the hot and warm rolling processes. These particles were a source of cavitation and poor elongation in superplastic deformation. On the other hand, fine precipitates were produced during thermomechanical processing, and resulted in improvement of superplasticity by stabilizing microstructure. Two-step homogenizing and air cooling process was more effective than onestep homogenizing and furance cooling process in removing microsegregations and producing fine particles.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.171-178
• /
• 2009

When we considered the superior ability of the semi-water soluble urethane 1st transcription and final epoxy products, the stability for moving historic sites depend on physical properties and the peel off state of separation media. In this paper, we synthesised three type of water-borne epoxy solution without using a surfactant, and investigated the peel off state, physical properties, and the state between urethane surface and epoxy surface after exfoliation. The life time of water-borne separation media is over the 60 days. When it is used the 30% solution of water-borne separation media, it made good separation of urethane pre-products surface and epoxy final product surface and no color change. The separation tension pressure is about 15~50 kg/$cm^2$ and there is no surface whitewash phenomenon. We suggest that this water-borne epoxy will be best material as separation media of low viscosity type.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.170-179
• /
• 2012

We examined pretreatment methods eliminating potassium and sodium efficiently for coir bag used in hydroponics by analyzing drainage coming from coir bags. In the first experiment we investigated for six coir bags with the high market shares. The three types of pretreatment were washing coir bags with only water for 7 days (W7S0), washing with water for 4 days and further with nutrient solution for 3 days (W4S3), and washing with only nutrient solution for 7 days (W0S7). In the second experiment we tested reproducibility of the experiment results for Bio Grow and coco Mix among six coir bags used in the first experiment to verify the results. As a result, the best pretreatments for the pH stabilization were W4S3 and W0S7. The EC value of the drainage was stabilized to less than 1.0 that is the same as EC of the supply solution on the fourth day in all treatments. The nutrients of the drainage in W7S0 was stabilized in 3~4 days but calcium and magnesium were depleted. We assessed that washing longer than 4 days was waste of water. The stabilization of coir bags in W0S7 was similar to it in W4S3, but washing with the nutrient solution for 7 days seemed to be uneconomical. The reproducibility experiment for two coir bags ensured the results in the first experiment. Therefore, the pretreatment method, which is the most simple to implement and economic, seems to wash with water for 3 days and then with the nutrient solution for 1 day before planting on coir bag.

• Journal of Korean Society of Forest Science
• /
• v.65 no.1
• /
• pp.12-23
• /
• 1984

This study was carried out to investigate on the catalytic pyrolysis products of hardwood (Alnus hirsuta (Spach) Rupr. Quercus acutissima Carruters, Robinia pseudoacacia L., and Populus tomentaglandulosa T. Lee) and comparing the rate of catalytic pyrolysis from untreated wood (ordinary wood) with that of treated wood with catalizer (Ammonium phosphate, Ammonium sulfate, Ammonium chloride and Urea). The results were summerized as follows; 1) It is the Populus tomentiglandulosa T. Lee that the species has the most content of holocellulose and pentosan. And Populus tomentiglandulosa exhibited high yield of the distillate in pyrolysis products by Ammonium phosphate with catalizer. 2) The distillate of pyrolysis products is decreased in accordance with increasing catalytic concentration. And untreated wood (ordinary wood) with catalizer has the most distillate of pyrolysis products. 3) The yield of charcoal in pyrolysis products is increased in accordance with increasing catalytic concentration and lignin content of species. 4) The caloric values of charcoal in pyrolysis products is decreased with increasing catalytic concentration. And untreated wood (ordinary wood) with catalizer had the most caloric values, but the caloric values of charcoal did not show statistically significent difference at 5% levels in catalizer.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.983-988
• /
• 2005

Effects of Citrus sunki peel and its fermented product extracts on physiological and functional activities of cellular systems were investigated. Ethanol extract of Citrus sunki peel showed potent ROS-scavenging activity using 2',7'-Dichlorofluorescin diacetate as a fluorescent ROS probe in HepG2 cells. Fermented product of C. sunki peel extract markedly suppressed nitric oxide production in lipopolysaccharide (LPS)-activated RAW264.7 murine macrophage cells. Treatment with fermented product of C. sunki peel extract decreased intracellular protein levels of inducible nitric oxide synthase and cyclooxygenase II stimulated by LPS. High doses of fermented product lend to apoptotic cell death in CHO-IR cells.

• Journal of Radiation Protection and Research
• /
• v.11 no.2
• /
• pp.139-145
• /
• 1986

An improved mothod of assessing fuel status by analyzsis of the fission product in the reactor coolant system is proposed. The release mechanism of specific fission products is established for determination of the coefficients in the equations which relate the radioactivities with the amount of defected fuel. Knock-out and migration models are employed in the formulation of the release mechanism. The influence of the tramp uranium is quantified. Sample calculations were made for KNU 1 reactor system using the I-131 and I-133 concentrations in the primary coolant. The estimated number of defected fuel pins in the third and sixth cycles appeared to be $9.34{\pm}1.13\;and\;0.294{\pm}0.092$, respectively.