• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.542-548
• /
• 2005

A fluidized bed reactor containing porous media has been known to be effective for nitrogen and organic matters removal in wastewater. The porous media which attached microbes plays important roles in simultaneous nitrification/denitrification (SND) due to coexistence of oxic, anaerobic and anoxic zone. For SND reaction, oxygen and organic substrates should be effectively diffused from wastewater into the intra-carrier zone. However, the overgrowth heterotrophic microbes at the surface of porous media may restrict from substrates diffusion. From these viewpoints, the existence and effect of heterotrophic bacteria at surface of porous media might be the key point for nitrogen removal. A porous media-membrane hybrid process was found to have improved nitrogen removal efficiency, due to stimulated denitrification as well as nitrification. Microelectrode studies revealed that although intra-media denitrification rate in a conventional fluidized bed was limited by organic carbon, this limitation was reduced in the hybrid process, resulting in the increased denitrification rate from 0.5 to $4.2\; mgNO_3-N/L/hr$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.2
• /
• pp.255-260
• /
• 1996

증편반죽의 발효에 따른 해면상의 조직(망상구조)형성능의 mechanism을 조사하기 위하여 반죽의 구성성분의 경시적 물성 및 효소(diastase 및 protease) 활성의 변화, 구성 전분 분획의 glucose chain length 변화 및 1% SDS에 의해서 용출되는 단백질 분획의 변화에 대해서 검토하였다. 발효가 진행됨에 따라 증편반죽의 pH는 감소한 반면 점성 및 부피는 발효경과 10시간가지 증가하다가 그 이후로는 약간 감소하는 경향을 보였다. 발효의 진행과 더불어 diastase의 활성은 증가하였으며, 쌀전분 분획 중 amylose의 함량은 약간 감소하였다. 그리고 전분분자의 $\alpha-1,6-glucoside$ 결합을 isoamylase(debranching enzyme)로 가수분해시킨 후 Sephadex G-75를 이용한 chromatogram 분석에 의하면 쌀가루 전분 분획과 증편반죽 전분 분획의 glucose chain length 분포는 거의 유사하지만 발효가 진행됨에 따라 중합도가 낮은 부분이 우선적으로 diastase의 작용을 받은 것이라고 생각되어진다. 한편, 발효가 진행된에 따라 protease의 활성은 증가하고 있었음에도 불구하고 증편반죽의 당에 의한 단백질 분획의 고분자화가 Suprose CL-12 column chromatogram 상에서 관찰되었는데, 이것은 아마도 발효과정 중 증편반죽에 공존하는 미생물들의 발효산물인 당질(gum질)을 매개로 한 단백질 분자의 회합에 의한 결과라고 생각되어진다. 따라서 이러한 결과를 미루어 볼 때 증편반죽의 망상구조 형성능은 발효과정 중 일어나는 당과 단백질간의 상호작용에 의한 결과라 생각되어진다.

• Elastomers and Composites
• /
• v.24 no.2
• /
• pp.105-109
• /
• 1989

Liquid phase adsorption of organic compounds solution on the activated carbon fiber was measured by chromatographic method in a packed column. Adsorption equilibrium constant Ka of dextrose solution was found to be $72.5cm^3/g$ on ACF without bacteria growth, while in the bacterial ACF packed column Ka was $87.9cm^3/g$. It is suggested that for biological ACF there is a large contribution of bacterial activity to the adsorption equilibrium constant. Axial dispersion coefficient Ez was determined to be in proportional to flow rate and Pe=dpu/Ez independent or existence or bacteria.

• Korean Journal of Materials Research
• /
• v.6 no.9
• /
• pp.925-930
• /
• 1996

Zr이 0.03wt%함유된 Mg-8.14Li-3.93AI 합금의 시효거동을 미소경도와 미세조직의 변화, 열분석 등으로 조사하였다. Zr의 첨가로 인하여 3원계 Mg-8.23Li-4.02A에 비하여 조직이 미세화되었으며 모든 시효조건에서 경도값이 높게 나타났다. 열분석결과 발열피크는 준안정 석출상인 MgLi2AI($\theta$)의 석출과 $\theta$상에서 안정상인 AILi으로의 변화와 관련된 것이고, 흡열피크는 $\theta$와 AILi상의 재용해에 대응되는 것으로 판단되었다. 피크 경도값(103Hv)은 $\theta$의 석출이 완료되는 393K에서 0.5시간 시효시 나타났으며 피크 경도조건에서의 미세조건은 $\beta$기지에 $\theta$와 AILi상이 공존하고 있음을 투과식 전자현미경으로 확인하였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.1
• /
• pp.43-50
• /
• 2001

In order to analyze the dynamic motions of fish cage systems made of a frame and a netting under the conditions of waves and current, the hydraulic model experiment at towing tank and the numerical computation using boundary integral element method based on linear potential theory were carried out on a square and a circular type of fish cage, The computed and measured results for the dynamic motions of model fish cage systems showed that the heave and pitch motions were almost unaffected by the inclusion of nets, while the surge motions were very reduced by drag force acting on them. In addition, irregular wave-induced motions of fish cages included non-negligible 2nd order harmonic components at high frequency nearly twice the wave frequency. The reason why these motions were considered was due to resonance or structural components of frames being overflown and out of water during a wave cycle. It was found that circular type was more desirable structure in the open sea than square one only in the respect of dynamic motions due to waves and current. Further verifications were needed considering hydrodynamic forces, fatigue life, and structure analysis based on long term stochastic waves including frequency and time domain for the purpose of analyzing and designing fish cage systems.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.232-237
• /
• 1998

This study was carried out to find the optimal operating conditions for separation of residual uranium from the simulated radwaste solution containing 19 elements, and to evaluate the validity of the process. The selected process was based on the solvent extraction with TBP(tributyl phosphate). As an extractor, two miniature mixer-settlers with a total of 18 stages were used. Extraction yield of U, Np and Tc was about 99.2%. 32.1%, and 99.9%, respectively. The other elements were coextracted in the range of 1~4%. Extraction yield of U exceeded those of the previous work performed with batch system, which resulted in the low extractability of U (about 80%) according to the coexisting element such as Nd and Fe. It was due to the characteristics of multi-stage extractor. On the other hand, low extractability of Np was caused by various oxidation states in the nitric acid medium. In the case of Tc, its high extractability may be attributed to the complex formation with Zr and U, which is not well proved yet. All elements extracted with TBP were stripped into aqueous phase more than 99% by 0.01M $HNO_3$. From the results, this process has no problem with respect to in the same step was required, because Np was distributed in the raffinate and U product, respectively.

• Journal of the Korean Vacuum Society
• /
• v.7 no.1
• /
• pp.17-23
• /
• 1998

$Pb(Fe_{0.5}Nb_{0.5}O_3(PFN)$ thin films were prepared by rf magnetron co-sputtering method on $SiO_2/Si$, ITO/glass, and $Pt/Ti/SiO_2/Si$ substrates and post-annealed at the $N_2$ atmosphere by RTA(rapid thermal annerling). The degree of crystallinity of PFN films was identified on various substrates. Electrical properties of PFN films was characterized for $Pt/PFN/Pt/Ti/SiO_2/Si$ structure. The composition of PFN films was estimated by EPMA (electron probe micro analysis). PFN films would be crystallized better to perovskite phase on ITO/glass substrate than $SiO_2/Si$ substrate. This may be induced by the deformation of Pb deficient pyrochlore phase due to Pb diffusion into $SiO_2/Si$ substrate. PFN films on $Pt/Ti/SiO_2/Si$ substrate. PFN films with 5-10% Pb excess were crystallized to perovskite phase from $500^{\circ}C$ temperature. In summary, we show that Pb composition and annealing temperature were critically influenced on crystallinity to perovskite phase. When PFN film with 17% Pb excess was annealed at $600^{\circ}C$ at the $N_2$ atmosphere for 300kV/cm and 88. Its remnant polarization coercive field $2.0 MC/cm^2$ and 144kV/cm, respectively.

• Korean Journal of Materials Research
• /
• v.4 no.4
• /
• pp.416-427
• /
• 1994

The changes of crystallinity and microstructure and the $Si_{1-x}Ge_x/Sio_2$ interfaces of $Si_{1-x}Ge_x$ alloys deposited on amorphous $SiO_{2}$ were studied as a function of deposition temperature. The crystallinity, microstructure, and compositional uniformity of $Si_{1-x}Ge_x$ alloys deposited on the SiOl at different temperature were investigated by X-ray diffraction and transmission electron microscopy. And $Si_{1-x}Ge_x/Sio_2$ interface were investigated by high-resolution transmission electron microscopy. The $Si_{0.7}Ge_{0.3}/Sio_2$ films were deposited on amorphous $SiO_{2}$ at $300^{\circ}C,400^{\circ}C,500^{\circ}C,600^{\circ}C,$ and $700^{\circ}C$ by Si-MBE. In the film deposited at $300^{\circ}C$, only amorphous phase were observed. In the film deposited at $400^{\circ}C$, both amorphous and polycrystalline films were observed. Both phases were deposited simultaneously, but, at initial film growth, amorphous phase prevailed over polycrystalline phase. As the film thickness increased, the fraction of polycrystalline phase increased. At $500^{\circ}C$, thin amorphous layer was observed at lOnm from $SiO_{2}$ surface. In the films deposited at higher than $600^{\circ}C$, only crystalline phase were observed. Polycrystalline films had columnar structure. Compositional uniformity for deposited films were good regardless of deposition temperature. The interfaces of $Si_{1-x}Ge_x/Sio_2$ were flat, whatever polycrystal or amorphous was deposited on $SiO_{2}$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.5
• /
• pp.725-734
• /
• 2010

This study conducted hydraulic testing to assess the stability of two types of pyramid-shaped artificial reefs (ARs) constructed to promote the growth of shellfish and seaweed. Previous theoretical and hydraulic experimental studies have clearly demonstrated Froude similitude. The results of this study revealed that some dimensionless design parameters affected the stability of both types of artificial reefs under various wave and current field conditions (e.g., surf similarity parameters, water particle velocity, wave pressure). In the fixed bed condition, the dimensionless water particle velocity based on the surf similarity parameter was large (about 0.4), and in the moveable bed condition, the relative water depth based on the dimensionless wave pressure was low (about 0.11). In addition, horizontal wave pressure and uplift pressure varied by relative water depth, demonstrating the tendency for wave pressure to decrease linearly with increased relative depth. These findings indicate that the development of more stable design technology forartificial reefs should be based on long-term data and additional study of sliding due to wave action. The findings also highlight the importance of hydraulic experiments in solving problems that have emerged in the design and construction of artificial reefs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.356-356
• /
• 2022

최근 기후변화로 인해 여름이면 매번 홍수와 가뭄이 공존하는 특성이 지속되고 있다. 이로 인해 여름이면 태풍, 홍수로 인한 수해재가 증가되고 또한, 가뭄의 지속기간이 길어져 가뭄의 심도가 심화되어 인적, 재산의 피해가 증가되고 있다. 이와 같은 기후변화로 인한 수재해를 예방하기 위해서는 무엇보다도 대상유역의 유역별 강우로 인한 유역 응답 특성을 정량화가 필요하다. 본 연구에서는 유역별 강우로 인한 유역 응답 특성을 정량화하기 위해 홍천강 유역을 연구 대상 유역으로 선정하였다. 홍천강 유역은 한강의 제1지류로서 한강 유역 중앙부에 위치하고 있으며, 하천연장과 유로연장은 106.99 km, 유역면적은 1,566.39 km²로 한강유역 면적의 5.95 %를 차지한다. 본 연구의 목적을 효율적으로 달성하기 위해 홍천강 본류 상·하류 관계에 있는 홍천군(굴운교), 홍천군(홍천교), 홍천강(반곡교) 지점을 연구 대상지점으로 선정하였다. 대상 지점의 유출량은 2021년에 개발된 수위-유량관계곡선식으로 환산하였으며, 유출특성 분석의 적정성은 강우대비 유출률과 상·하류 간 유출 수문곡선으로 평가하였다. 지점별 유역평균강수량을 티센가중법으로 산정하여 상·하류 간 유출 특성을 분석한 결과, 홍천군(굴운교) 35.93%, 홍천군(홍천교) 36.06,% 홍천군(반곡교) 37.25%의 특성을 보였다. 이는 2021년 홍천강 유역의 강수량이 연평균강수량에도 미치지 못한 점을 감안하여 볼 때, 이의 특성은 적정성을 가진 것으로 판단된다. 또한 상·하류 간 첨두 유출량도 상류에서 하류로 갈수록 증가하는 일반적인 양상을 나타내었다.