• The Transactions of the Korea Information Processing Society
• /
• v.3 no.6
• /
• pp.1553-1567
• /
• 1996

The numerous applications surface interpolation include the modeling and visualization phenomena. A tetrahedrization is one of pre-processing steps for 4-D space interpolation. The quality of a piecewise linear interpolation 4-D space depends not only on the distribution of the data points in $R^2$, but also on the data values. We show that the quality of approximation can be improved by data dependent tetraheadrization through visualization of 4-D space. This paper discusses Delaunary tetrahedrization method(sphere criterion) and one of the data dependent tetrahedrization methods(least squares fitting criterion). This paper also discusses new data dependent criteria:1) gradient difference, and 2) jump in normal direction derivative.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.410-414
• /
• 2003

본 논문은 비디오 시퀀스에 카메라 패닝 보상과 2차원 시공간 엔트로피 임계법을 적용하여 추출한 객체포함영역을 대상으로 영상 분할을 수행하는 이동 객체 분할 기법에 관한 것이다. 우선, 웨이블렛 변환에 의해 구성한 피라미드 계층 구조상에서 카메라 패닝 벡터를 추정하여 전역 움직임을 보상한다. 이후, 전역 움직임이 보상된 기준영상을 대상으로 각 프레임간에서 2차원 시공간 엔트로피 임계법을 적용하여 이동 객체가 포함될 가능성이 있는 영역을 블록 단위로 추출한다. 다음으로, 2차원 시공간 엔트로피 입계법에 의해 분류된 영역을 토대로 각 블록을 움직임블록, 준 움직임 블록, 비 움직임 블록 중 어느 하나로 분류한 검색 테이블을 작성한다. 이어서, 검색 테이블을 참조하여 초기 탐색 계층 및 탐색 영역을 적응적으로 선정함으로써 피라미드 계층 구조상에서 효율적인 고속 움직임 추정을 수행하여 이동 객체에 해당하는 객체포함영역만을 추출한다. 최종적으로, 이렇게 추출된 객체포함영역에서 임계 기울기 영상을 정의한 후, 이를 기준 삼아 객체포함영역에 화소 단위의 형태학 기반 영상 분할 알고리즘을 적용함으로써 비디오 시퀀스에 포함된 이동 객체를 분할한다. 컴퓨터 시뮬레이션 결과를 통해 고찰할 때, 제안된 방법은 이동 객체에 대한 상대적으로 우수한 분할 특성을 제공할 수 있고, 특히 저대조 경계면의 분할 특성을 제고시키고 있음을 확인할 수 있다.

• The Korean Journal of Applied Statistics
• /
• v.13 no.2
• /
• pp.393-405
• /
• 2000

Box and Draper( 19(5) listed some properties of a design that should be considered in design selection. But it is impossible that one design criterion from optimal experimental design theory reflects many potential objectives of an experiment, because the theory was originally based on the underlying model and its strict assumption about the error structure. Therefore, when it is neces::;ary to implement multi-objective experimental design. it is common practice to balance out the several optimal design criteria so that each design criterion involved benefits in terms of its relative "high" efficiency. In this study, we proposed several composite design criteria taking the case of heteroscedastic model. WVhen the heteroscedasticity is present in the model. the well known equivalence theorem between 1)- and C-optimality no longer exists and furthermore their design characteristics are sometimes drastically different. We introduced three different design criteria for this purpose: constrained design, combined design, and minimax design criteria. While the first two methods do reflect the prior belief of experimenter, the last one does not take it into account. which is sometimes desirable. Also we extended this method to the case when there are uncertainties concerning the error structure in the model. A simple algorithm and concluslOn follow.On follow.

• Journal of Fisheries and Marine Sciences Education
• /
• v.6 no.2
• /
• pp.117-129
• /
• 1994

본 논문에서는 접촉하는 두 물체의 동적접촉문제를 해석하기위한 음해법과 양해법을 합성한 새로운 하이브리드 해석방법을 제안하였다. 그리고 양해법의 결과를 기준으로 하여 그 계산정도를 비교하고 제안한 방법의 정도와 효율의 유효성을 조사하였다. 얻어진 결과를 요약하면 아래와 같다. 1) 마찰을 고려한 음해법과 양해법의 정식화를 통하여 접촉상태에서 분리가 일어날때 까지를 표현할 수 있는 새로운 알고리즘을 제시하였다. 2) 본 방법은 종래의 음해법에 비해 계산시간이 짧고 계산정도는 거의 비슷한 결과를 보였다. 3) 하이브리드법은 알고리즘의 변경이 간단하고, 동적접촉문제의 해석을 위한 실용적인 면에 큰 장점을 가지고 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1181-1185
• /
• 1990

A failure evaluation diagram to evaluate fatigue fracture was developed. The relation between the fatigue limit and the threshold stress intensity factor for the short-cracked specimens of various materials including a piping carbon steel can be rationally predicted by the proposed method. It is shown that the coupled failure evaluation diagram for fatigue and ductile fracture is expecially useful for evaluation of the flaw tolerance as well as the margin of the safety of the pressure vessel and piping. Further, accumulation of fatigue data will be needed to construct an accurate fatigue failure evaluation diagram.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.321-330
• /
• 2011

The physical properties of horticultural substrate are important for optimal plant growth. The physical properties should be properly maintained during the crop growing season for producing higher yield. This experiment was carried out to evaluate the physical properties of different mixtures from various raw materials as horticultural substrates. The mixtures at the different ratios of peatmoss, perlite and vermiculite subjected to 10:0:0, 8:2:0, 6:4:0, 4:6:0, 2:8:0, 0:8:2, 0:10:0, 0:6:4, 0:4:6, 0:2:8, 8:0:2, 0:0:10, 6:0:4, 4:0:6, 2:0:8, 2:6:2, 2:4:4, 4:2:4, 4:4:2, 6:2:2 and 2:2:6 were prepared and analyzed according to two methods of the European Standardization (EN) and Rural Development Administration (RDA). The optimum range of physical properties of a specific horticultural substrate can be predicted using physical-property-triangle. This triangle can also be used to convert a physical property from the EN method to that from the RDA method. Results showed that the mixture at a ratio of > 60% peatmoss, in most cases, is in the range of optimum physical condition for plant growth. We conclude that the developed physical-property-triangle can be suitable to suggest the optimum ratios of horticultural substrates used in this study.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.6
• /
• pp.66-74
• /
• 2020

To prevent incident of demolition work the Building Management Act was implemented to manage demolition work. According to this law, buildings with the scale upper than 500㎡ of floor area are classified as permission to conduct the demolition work, however it may be hard to perform safety management at demolition work. In addition, the risk level of demolition work is varied with related to the structure type. So, the purpose of this study is to suggest the improvements of criteria on demolition work considering building structure types including small-scale structures such as masonry, wooden, and other structure. The research process was conducted by three steps. (I) Application of Building Management Act; (II) Analysis of demolition work by structure types; and (III) Subdivision of permission targets by building structure types. The result of this study, permission ratio was only 10% for total demolition work and 2.43% for masonry. Because the masonry, wooden, and other structure types are concentrated on a floor area of small-scale, the separate criteria of demolition work is need to prevent the accident and fatal incident. Through the results, the decision maker can be utilized (1) For the special building structure types, the criteria of enhanced safety management are applied by referring to the overseas law ; and (2) The demolition work can be considered by the criteria of separate permission in terms of structure types.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.277-287
• /
• 2017

This paper describes the specifications on balanced steel ratio and maximum reinforcement for the design of RC flexural members by the Korean Highway Bridge Design Code based on limit states design. The Korean Highway Bridge Design Code (Limit States Design) is not provide for the balanced steel ratio specification for the calculation of required steel area of RC flexural members design. The maximum steel area limited the depth of the neutral axis at the ultimate limit states after redistribution of the moment, and also recommended the maximum steel area should not exceed 4 percent of the cross sectional area. However, from the maximum neutral axis depth provisions should increase the cross section is calculated to be less the maximum reinforcement area, and according to the 4% of the cross sectional area of the concrete, the tensile strain of the reinforcement is calculated to be greater than double the yielding strain, so can not guarantee a ductile behavior. This study developed a balanced reinforcement ratio that is basis for the required reinforcement calculation for tension-controlled RC flexural members design in the ultimate limit states verification provisons and material properties and applied the ultimate strain of the concrete compressive strength with a simple formular to be applied to design practice induced. And assumed the minimum allowable tensile strain of reinforcement double the yielding strain, and applying correction coefficient up to the ratio of maximum neutral axis depth, proposed maximum steel ratio that can be applied irrespective of the reinforcement yield strength and concrete compressive strength.

• The monthly packaging world
• /
• s.324
• /
• pp.86-91
• /
• 2020

식품의약품안전처(처장 이의경)는 식품용 기구·용기 "포장의 공통기준을 세분화 하는 등의 내용을 담은" 기구 및 용기·포장의 기준 및 규격·고시 개정안을 2월28일 행정예고했다. 이번 개정안의 주요 내용은 ▲공통제조기준의 세분화, ▲합성수지의 재활용기준 명확화, ▲공통규격 및 용도별 규격정비, ▲시험법개선등이다. 다음에 기구 및 용기·포장의 기준 및 규격 일부개정고시(안)의 상세한 내용을 살펴보도록 한다.

• 월간 기계설비
• /
• s.245
• /
• pp.34-35
• /
• 2010

앞으로 건설현장에서 산업안전보건법 위반사례가 적발될 경우 시정기회 없이 바로 과태료가 부과된다. 또 법 위반 횟수에 비례해 과태료도 차별화될 전망이다. 고용노동부는 이같은 내용의 산업안전보건법 시행령 개정안을 지난 11월 18일 공포하고 시행에 들어갔다. 다만, 과태료 부과기준은 6개월 후인 2011년 5월 19일부터 적용된다.