• Journal of the Korean Institute of Gas
• /
• v.20 no.1
• /
• pp.13-22
• /
• 2016

This paper presents development of an appropriate procedure and flow chart to analyze shale gas production data obtained from a multi-fractured horizontal well according to flow characteristics in order to calculate an estimated ultimate recovery. Also, the technical considerations were proposed when a rate transient analysis was performed with field production data occurred to only $1^{st}$ transient flow. If production data show the $1^{st}$ transient flow from log-log and square root time plot analysis, production forecasting must be performed by applying different method as before and after of the end of $1^{st}$ linear flow. It is estimated by an area of stimulated reservoir volume which can be calculated from analysis results of micro-seismic data. If there are no bottomhole pressure data or micro-seismic data, an empirical decline curve method can be used to forecast production performance. If production period is relatively short, an accuracy of production data analysis could be improved by analyzing except the early production data, if it is necessary, after evaluating appropriation with near well data. Also, because over- or under-estimation for stimulated reservoir volume could take place according to analysis method or analyzer's own mind, it is necessary to recalculate it with fracture modeling, reservoir simulation and rate transient analysis, if it is necessary, after adequacy evaluation for fracture stage, injection volume of fracture fluid and productivity of producers.

• The Journal of Korean Medicine
• /
• v.39 no.4
• /
• pp.1-15
• /
• 2018

Objectives: Cerebral ischemia results from a variety of causes that cerebral blood flow is reduced due to a transient or permanent occlusion of cerebral arteries. Reactive astrocytes and microglial activation plays an important role in the neuronal cell death during ischemic insult. Acupunctural treatment is effective for symptom improvement in cerebrovascular accident, including cerebral ischemia. Methods: In the present study, the effects of acupuncture at the ST40 acupoint on short-term memory and apoptosis in the hippocampal CA1 region following transient global cerebral ischemia were investigated using gerbils. Transient global ischemia was induced by occlusion of both common carotid arteries with aneurysm clips for 5 min. Acupuncture stimulation was conducted once daily for 7 consecutive days, starting one day after surgery. Results: In the present results, ischemia induction deteriorated short term memory, increased apoptosis, and induced reactive astrocyte and microglial activation. Acupuncture at ST40 acupoint ameliorated ischemia-induced short-term memory impairment by suppressing apoptosis in the hippocampus through down-regulation of reactive astrocytes and microglial activation. Conclusion: The present study suggests that acupuncture at the ST40 acupoint can be used for treatment of patients with cerebral stroke.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.59-65
• /
• 1990

This study investigates the effects of human impact and precipitation on groundwater flow conditions at a small area in Dejima Upland using a transient three-dimensional simulation. To show the utility of the transient three-dimensional model, the results of the numerical model are compared with those of Theis problem for which analytical solution is available. It appears that over the time period studied, the results of the model agree well with the analytical solution. Simulation is undertaken for a period of 30days starting from May 1st, when irrigation starts. Groundwater flow patterns determined by a numerical model are presented in the form of plotted potential lines and discussed. Results of simulation clearly indicate that the groundwater flow system should be analysed using a transient three-dimensional model, especially for the region which is effected by human impact.

• Journal of the Korean Magnetic Resonance Society
• /
• v.6 no.1
• /
• pp.45-53
• /
• 2002

Objectives: This study investigated alterations in regional cerebral blood flow (rCBF) in patients with transient global amnesia (TGA) using statistical parametric mapping 99 (SPM99). Methods: Noninvasive rCBF measurements using 99mTc-ethyl cysteinate dimer (ECD) SPECT were performed on 8 patients with TGA who have ongoing symptoms and 17 age matched controls. The relative rCBF maps in patients with TGA and controls were compared. Results: In patients with TGA, significant decreased rCBF was found along the L superior temporal extending to L parietal region of the brain and L thalamus. There were areas of increased rCBF in the R temporal, R frontal region and R thalamus. Conclusion: We could demonstrate decreased perfusion in left cerebral hemisphere and increased perfusion in right cerebral hemisphere in patients with TGA using SPM99. The imbalanced change of rCBF between bilateral cerebral hemisphere in patients with TGA might suggest that imbalanced neuronal activity between the bilateral hemispheres may have strong relationship to the pathogenesis of the TGA. For quantitative SPECT analysis in TGA patients, we recommend SPM99 rather than the ROI method because of its definitive advantages.

• Journal of Hydrogen and New Energy
• /
• v.23 no.6
• /
• pp.678-687
• /
• 2012

Concentration fields of solid powder in a liquid fuel were quantitatively measured by a visualization technique. The measurement system consists of a camcoder and three LCD monitors. The solid powder (glass powder) were filled in a head tank which was installed over a main mixing tank ($D{\times}H$, $310{\times}370mm$). The main mixing tank was filled with JetA1 fuel oil. With a sudden opening of the upper tank by pressurized nitrogen gas with 1.9 bar, the solid powder were poured into the JetA1 oil. An impeller type agitator was being rotated in the mixing with 700 rpm for the enhancements of mixing. Uniform visualization for the mixing flow field was made by the light from the three LCD monitors, and the visualized images were captured by the camcoder. The color images captured by the camcoder The color information of the captured images was decoded into three principle colors R, G, and B to get quantitattive relations between the concentrations of the solid powder and the colors. To get better fitting for the strong non-linearity between the concentration and the color, a neural network which has strong fitting performances was used. Analyses on the transient mixing of the solid powders were quantitatively made.

• Journal of Hydrogen and New Energy
• /
• v.23 no.4
• /
• pp.364-372
• /
• 2012

Transient mixing states of two different fuel oils, dimethylformamide (DMF) oil and JetA1 oil, were investigated by using a color image processing and a neural network. A tank ($D{\times}H$, $310{\times}370mm$) was filled with JetA1 oil. The DMF oil was filled at a top tank, and was mixed with the JetA1 oil in the tank mixing tank via a sudden opening which was performed by nitrogen gas with 1.9 bar. An impeller was rotated with 700 rpm for mixing enhancements of the two fuel oils. To visualize the mixing state of the DMF oil with the JetA1 oil, the DMF oil was coated with Rhodamine B whose color was red. A LCD monitor was used for uniform illumination. The color changes of the DMF oil were captured by a camcoder and the images were transferred to a host computer for quantifying the information of color changes. The color images of two mixed oils were captured with the camcoder. The R, G, B color information of the captured images was used to quantify the concentration of the DMF oil. To quantify the concentration of the DMF oil in the JetA1 oil, a calibration of color-to-concentration was carried out before the main experiment was done. Transient mixing states of DMF oil with the JetA1 oil since after the sudden infiltration were quantified and characterized with the constructed visualization technique.

• International Journal of Fluid Machinery and Systems
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2008

In the first part of the paper, Computational Fluid Dynamics analysis of the combusting flow within a high-swirl lean premixed gas turbine combustor and over the $1^{st}$ row nozzle guide vanes is presented. In this analysis, the focus of the investigation is the fluid dynamics at the combustor/turbine interface and its impact on the turbine. The predictions show the existence of a highly-rotating vortex core in the combustor, which is in strong interaction with the turbine nozzle guide vanes. This has been observed to be in agreement with the temperature indicated by thermal paint observations. The results suggest that swirling flow vortex core transition phenomena play a very important role in gas turbine combustors with modern lean-premixed dry low emissions technology. As the predictability of vortex core transition phenomena has not yet been investigated sufficiently, a fundamental validation study has been initiated, with the aim of validating the predictive capability of currently-available modelling procedures for turbulent swirling flows near the sub/supercritical vortex core transition. In the second part of the paper, results are presented which analyse such transitional turbulent swirling flows in two different laboratory water test rigs. It has been observed that turbulent swirling flows of interest are dominated by low-frequency transient motion of coherent structures, which cannot be adequately simulated within the framework of steady-state RANS turbulence modelling approaches. It has been found that useful results can be obtained only by modelling strategies which resolve the three-dimensional, transient motion of coherent structures, and do not assume a scalar turbulent viscosity at all scales. These models include RSM based URANS procedures as well as LES and DES approaches.

• Nuclear Engineering and Technology
• /
• v.41 no.7
• /
• pp.885-892
• /
• 2009

This manuscript will discuss a numerical method where the six equations of two-phase flow, the solid heat conduction equations, and the two equations that describe neutron diffusion and precursor concentration are solved together in a tightly coupled, nonlinear fashion for a simplified model of a nuclear reactor core. This approach has two important advantages. The first advantage is a higher level of accuracy. Because the equations are solved together in a single nonlinear system, the solution is more accurate than the traditional "operator split" approach where the two-phase flow equations are solved first, the heat conduction is solved second and the neutron diffusion is solved third, limiting the temporal accuracy to $1^{st}$ order because the nonlinear coupling between the physics is handled explicitly. The second advantage of the method described in this manuscript is that the time step control in the fully implicit system can be based on the timescale of the solution rather than a stability-based time step restriction like the material Courant limit required of operator-split methods. In this work, a pilot code was used which employs this tightly coupled, fully implicit method to simulate a reactor core. Results are presented from a simulated control rod movement which show $2^{nd}$ order accuracy in time. Also described in this paper is a simulated rod ejection demonstrating how the fastest timescale of the problem can change between the state variables of neutronics, conduction and two-phase flow during the course of a transient.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.1-9
• /
• 2013

Variable area nozzle, where both throat and exit area vary, is required for optimal expansion and optimal nozzle shape upon operation of after-burner. Steady-state and transient analyses are carried out for each condition with and without afterburner operation and as a function of the location of the nozzle flap. Effects of that nozzle displacement on flow and thrust characteristics are analyzed from numerical results. With variable area nozzle adopted, the combustion field is variable in time, leading to periodically variable thrust. For off-design conditions, flow separation shows up due to over expansion at the flap tips and shock wave does in the nozzle due to under expansion. The undesirable phenomena can be solved by control of variable area nozzle.

• The Journal of Korean Medicine
• /
• v.19 no.2
• /
• pp.59-74
• /
• 1998

Clinical observation was done on 272 cases of patients who were diagnosed as CVA with brain CT, TCD, MRI scan and clinical observation. They were hospitalized in the oriental medical hospital of Kyung-Won University from 1st January to 31st December in 1997. 1. The cases were classified into the following kinds: cerebral infarction, cerebral hemorrhage. and transient ischemic attack. The most case of them was the cerebral infarction. 2. There is no significant difference in the frequency of strokes in male and female. And the frequency of strokes was highest in the aged over 50. 3. In cerebral infarction the most frequent lesion was the territory of middle cerebral artery, and in cerebral hemorrhage the most frequent lesion was the basal ganglia. 4. The most ordinary preceding disease was hypertension. and the next was diabetes. 5. The rate of recurrence was high in cerebral infarction. 6. The cerebral infarction occurred usually in resting and sleeping, and the cerebral hemorrhage in acting. 7. The common symptoms were motor disability and verbal disturbance. 8 The average time to start physical therapy was 1l.3rd day after stroke in cerebral infarction and it was 15.2th day after stroke in cerebral hemorrhage. 9. The common complications were urinary tract infection, pneumonia, myocardial infarction. 10. Hypercholesterolemia and hypertriglyceridemia are usually found more frequently in cerebral infarction than in hemorrhage. 11. In acute or subacute stage, the methods of smoothening the flow of ki(順氣), dispelling phlegm(祛痰), clearing away heat(淸熱) or purgation(瀉下) were frequently used. and in recovering stage, the methods of replenishing ki(補氣), tonifying the blood(補血) or tranquilization(安神) were frequently used.