• Journal of the Korean Magnetics Society
• /
• v.5 no.1
• /
• pp.64-70
• /
• 1995

The authors have studied crystallographic and magrletic properties of $NdFe_{10.7}TiM_{0.3}(M=B,\;Ti)$ by X-ray diffraction, VSM magnetometer, and Mossbauer spectrometer. The Alloys were prepared by arc-melting under argon atmosphere. The $NdFe_{10.7}TiM_{0.3}$ has pure single phase, whereas the $NdFe_{10.7}Ti_{1.3}$ contains some $\alpha-Fe$, from powder X-ray diffractometry. The $NdFe_{10.7}TiM_{0.3}$ has the $ThMn_{12}$-type tetragonal structure with $a_{0}=8.587\;{\AA}\;and\;c_{0}=4.788\;{\AA}$. The Curie temperature ($T_c$) is $570{\pm}3\;K$ from $M\"{o}ssbauer$ spectroscopy performed at various temperatures ranging from 13 to 770 K. Each spectrum of below $T_c$ was fitted with five subspectra of Fe sites in the structure ($8i_{1},\;8i_{2},\;8j_{1},\;8j_{2}\;and\;8f$). The area fraction of the subspectra at room temperature are 16.4, 8.2, 14.8, 21.3 and 39.3 %, respectively. Magenetic hyperfine fields for the Fe sites decrease in the order, $H_{hf}(8i)>H_{hf}(8j)>H_{hf}(8f)$.

• Korean Journal of Clinical Laboratory Science
• /
• v.46 no.2
• /
• pp.47-53
• /
• 2014

The purpose of this study was to evaluate the clinical utility of TB/NTM PCR by comparing the results of TB PCR to detect Mycobacterium tuberculous (MTB) and nontuberculous mycobacteria (NTM) from paraffin-embedded tissue specimens. A total of 60 cases were tested using TB PCR and TB/NTM PCR. The MTB and NTM rate of TB/NTM PCR was 84.2% (16/19), 10.5% (2/19) in TB positive of TB PCR. The NTM rate of TB/NTM PCR was 29.3% (12/41) in TB negative of TB PCR. Fourteen different species of NTM were identified, the common isolate was M. gordonae (21.4%), M. avium (14.3%), M. ulcerans (7.1%), M. interjectum (7.1%), M. gilvum (7.1%), M. fortuitum (7.1%), M. mucogenicum (7.1%). The rare species identified were M. farcinogenes (7.1%), M. tokaiense (7.1%). Therefore, TB/NTM PCR is useful to differentiate MTB and NTM from paraffin-embedded tissue specimens and it is more effective in detecting NTM with TB PCR.

• Ecology and Resilient Infrastructure
• /
• v.2 no.2
• /
• pp.154-160
• /
• 2015

This paper presents the field investigation of deposition and erosion relief of a riverfront using vegetation. The results obtained were as follows: Phragmites japonica showed 0.2 m of deposition and 0.3 m-0.4 m of erosion relief of river front by the critical velocity of 1.0 m/s-1.2 m/s. P. communis showed 0.1 m-0.4 m of deposition and 0.2 m-0.3 m of erosion relief by the critical velocity of 0.6 m/s-0.7 m/s. Salix gracilistyla showed 0.1 m-0.2 m of deposition and 0.4 m-0.5 m of erosion relief by the critical velocity of 1.2 m/s-1.4 m/s. Miscanthus sacchariflorus showed 0.1 m-0.4 m of deposition and 0.1 m-0.2 m of erosion relief by the critical velocity of 0.6 m/s-0.7 m/s. S. gracilistyla had the greatest role, while M. sacchariflorus had the lowest role for erosion relief. These results showed that aquatic plants had an effective role in sustaining a stable channel.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.2
• /
• pp.118-131
• /
• 1997

An opening efficiency experiment of anchovy boat seine has been carried out using a half size of the ordinary seine to reduce the size of the seine net and to improve the fishing efficiency from field operation. The intervals of towing boats were set at 100, 200 and 300m, and the towing speed, at 0.6, 0.9, and 1.2k't by possible combinations of them. The vertical openings of wing net, inside wing net, bagnet and flapper as well as the spreads of the seine net and the towing tension of the warp were measured, to find out efficient fishing gear and method of the anchovy boat seine. The results obtained are as follows : 1. The vertical opening of the inside wing net ranged from 8.7m to 12.0m at the normal current and from 7.0m to 10.0m at the counter current, and that of the wing net, from 8.4m to 19.8m at the normal current and from 4.9m to 16.3m at the counter current. The vertical opening of the wing net and inside wing net decreased as the towing speed and intervals of the boats increase, from 66% to 16% and from 32% to 18% of the normal opening, respectively. 2. The vertical opening of the fore of bag net ranged from 7.9m to 12.8m at the normal current and from 7.4m to 9.7m at the counter current, and that of the flapper, from 3.4m to 5.1m at the normal current and from 4.4m to 5.1m at the counter current, and that of the flapper, from 3.4m to 5.1m at the normal current and from 4.4m to 5.1m at the counter current. The vertical opening of the bag net was from 98% to 57% of the normal opening and the flapper showed a circular shape and it rose up to the upper layer with a slower towing speed. 3. The vertical opening of the end of the bag net ranged from 7.1m to 9.3m at the normal current and from 7.4m to 8.8m at the counter current. The end of the bag net rose up to the upper layer, This phenomenon was more apparent as the towing speed and the interval of the boats increase. 4. The towing tension of the experimental nets increased from 648kg to 2,716kg at the normal current and from 1,050kg to 6,010kg at the counter current with increasing towing speed. 5. The net depth of the anchovy seine was stable with the higher towing speed and the wider interval of the boats, but it was unstable by rising up to the upper layer with the lower towing speed and the narrower interval of towing boats.

• Journal of Radiation Protection and Research
• /
• v.27 no.2
• /
• pp.95-100
• /
• 2002

Conventional and modified electrolytic decontamination experiment were performed in the 1.7 M solution of sodium sulfate and sodium nitrate tot decontamination of carbon steel as the simulated metal wastes which have been produced in large amounts from nuclear power plants. Anode ant cathode were used as inconel and titanium respective. The reaction time and temperature were 1 hr and $25^{\circ}C$ The analyses were performed of the characteristics such as weight loss arid thickness change of metal waste. suspended solid in electrolyte and SEM observation. In modified electrolyte decontamination system with increased current density ranged from 0.1 to $0.6A/cm^2$, the metal waste showed thickness changes of $0.48{\pm}0.005$ to $67.7{\pm}0.02{\mu}m$ in 1.7 M sodium sulfate and those of $0.06{\pm}0.005$ to $17.7{\pm}0.05{\mu}m$ in sodium nitrate. Metal waste in modified electrolyte decontamination system showed the thickness change of $9.8{\pm}0.01{\mu}m$ while it reacted up to $3.7{\pm}0.03{\mu}m$ in conventional system with $0.3 A/cm^2$ of current density and 1.7 M sodium sulfate. Decontamination efficiencies of modified electrolytic process ate much hither than that of conventional electrolytic process when both are applied to metal waste.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.7
• /
• pp.1038-1042
• /
• 2006

A new type of DTPA-bis-amides (L1-L4) and their Gd(III)-complexes of the type $[Gd(L)(H_2O)]{\cdot}nH_2O$ (5: L1; 6: L2; 7: L3; 8: L4) have been prepared and characterized by analytical and spectroscopic techniques. The X-ray crystal structure of 8 has been determined for structural confirmation. The coordination geometry adopts a tricapped trigonal prism geometry with L4 acting as a chelate octadentate and a water molecule in the coordination sphere. Crystals are monoclinic, $P2_1$, a = 14.468(3), b = 19.235(4), c = 13.527(2) $\AA$ $\beta$ = $107.245(3)^{\circ}$, V = 3595.2(11) $\AA^3$, Z = 4, $D_{calc}$ = 1.570. Significant increases in relaxivities are observed with 6 and 7 as compared with that of $Omniscan^{(R)}$, a commercial MR agent: R1 = 12.46 $mM^{-1}\;s^{-1}$, R2 = 8.76 $mM^{-1}\;s^{-1}$ for 6; R1 = 12.77 nm-1 s-1, R2 = 7.60 mM-1 s-1 for 7; R1 = 4.9 $mM^{-1}\;s^{-1}$, R2 = 4.8 $mm^{-1}\;s^{-1}$ for $Omniscan^{(R)}$. In the case of 5, however, both R1 and R2 are found to be lower to show 2.09 $mM^{-1}\;s^{-1}$, and 1.82 $mM^{-1}\;s^{-1}$, respectively.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.77-82
• /
• 2010

Purpose: As PET/CT come into wide use, it caused increasing of expose in clinical use. Therefore, Korea Food and Drug Administration issued Patient DRL (Diagnostic Reference Level) in CT scan. In this study, to build the basis of patient dose reduction, we analyzed effective dose in transmission scan with CT scan. Materials and Methods: From February, 2010 to March 180 patients (age: $55{\pm}16$, weight: $61.0{\pm}10.4$ kg) who examined $^{18}F$-FDG PET/CT in Asan Medical Center. Biograph Truepoint 40 (SIEMENS, GERMANY), Biograph Sensation 16 (SIEMENS, GERMANY) and Discovery STe8 (GE healthcare, USA) were used in this study. Per each male and female average of 30 patients doses were analyzed by one. Automatic exposure control system for controlling the dose can affect the largest by a patient's body weight less than 50 kg, 50-60 kg less, 60 kg more than the average of the three groups were divided doses. We compared that measured value of CT-expo v1.7 and ImPACT v1.0. The relationship between body weight and the effective dose were analyzed. Results: When using CT-Expo V1.7, effective dose with BIO40, BIO16 and DSTe8 respectably were $6.46{\pm}1.18$ mSv, $9.36{\pm}1.96 $mSv and $9.36{\pm}1.96$ mSv for 30 male patients respectably $6.29{\pm}0.97$ mSv, $10.02{\pm}2.42$ mSv and $9.05{\pm}2.27$ mSv for 30 female patients respectably. When using ImPACT v1.0, effective dose with BIO40, BIO16 and DSTe8 respectably were $6.54{\pm}1.21$ mSv, $8.36{\pm}1.69$ mSv and $9.74{\pm}2.55$Sv for 30 male patients respectably $5.87{\pm}1.09$ mSv, $8.43{\pm}1.89$ mSv and $9.19{\pm}2.29$ mSv for female patients respectably. When divided three groups which were under 50 kg, 50~60 kg and over 60 kg respectably were 6.27 mSv, 7.67 mSv and 9.33 mSv respectably using CT-Expo V1.7, 5.62 mSv, 7.22 mSv and 8.91 mSv respectably using ImPACT v1.0. Weight and the effective dose coefficient analysis showed a very strong positive correlation(r=743, r=0.693). Conclusion: Using such a dose evaluation programs, easier to predict and evaluate the effective dose possible without performing phantom study and such dose evaluation programs could be used to collect basic data for CT dose management.

• Journal of the Korean Magnetics Society
• /
• v.10 no.6
• /
• pp.269-273
• /
• 2000

Fe-l7Cr-2M(M=Si, Nb, Mo) alloy powder was prepared by plasma electrode rotating atomizer and than the alloy powder was formed and sintered. The particle shape of the Fe-l7Cr-2M(M=Si, Nb, Mo) alloy power is spherical. The saturation magnetization of the sintered Fe-17Cr-2Mo and Fe-l7Cr-2Nb alloy are 155 emu/g. The saturation magnetization of the sintered Fe-l7Cr-2Si alloy is less than that of the sintered Fe-l7Cr-2Mo and Fe-l7Cr-2Nb alloy. The amplitude relative permeability of the sintered Fe-l7Cr-2M(M=Si, Nb, Mo) alloy has the maximum value in the range of 3∼5 Oe applied field at forming pressure 12 ton/cm$^2$, sintering temperature 1200$^{\circ}C$, and frequency 1 kHz. Power loss of the sintered Fe-l7Cr-2Nb alloy is 40 mW/cc at applied field, H$\sub$a/=5 Oe, and frequency, f=1 kHz. The power loss of the sintered Fe-l7Cr-2Nb alloy is a half of that of the sintered Fe-l7Cr-2Si and Fe-l7Cr-2Mo alloy.

• Journal of the Korean Society of Food Culture
• /
• v.2 no.1
• /
• pp.1-8
• /
• 1987

In order to develop a convenient Korean food service system in commercial kitchen, processing procedure and recipe of 10 kinds of Korean food to be served as a convenient foods were decided. Moving distance and required energy of laborer in the commercial and model restaurants which have the area of $62.8m^2$ and $32.4m^2$, respectively, were measured by arranging these machinery. The results obtained were summarized as follows. In case of restaurant with the area of $62.8m^2$, moving distance, working hours and required energy of laborers were 1,922m, 2,986min and 4,704kcal in C-store, 2,134m, 3,173min and 5,001.7kcal in T-store, and 1,704m, 2,808min and 4,414.5kcal in model restaurant, respectively. Therefore energy requirements of the model restaurant were less 289.5kcal (4.5%) and 587.2kcal (10.1%) than those of C and T store. In case of restaurant with the area of $32.4m^2$, moving distance, working hours and required energy of laborer in S store were 1,277m, 2,926min and 4,588kcal, 1,425m, 3,108min and 4,873.8kcal in H restaurant and 1,167m, 2,798min and 4,381.4kcal in model restaurant, respectively. Therefore energy requirements of the model restaurant were less 206.6kcal (4.7%) and 492.4kcal (11.2%) than those of S store and H restaurant. When 6 kinds of convenient foods and 4 kinds of direct cooking foods were produced, moving distance, working hours and required energy of laborer in S store were 554.7m, 972min and 1,586.0kcal, 684.7m, 991min and 1,579.2kcal in H restaurant, 523.1m, 938min and 1,479.5kcal in model restaurant. Therefore energy requirements of the model restaurant were less 99.7kcal(6.7%) and 106.5kcal(7.2%) than those of S store and H restaurant. In case of the energy saving system kitchen, moving distance and required energy were saved less by 42% and by 20.4% than those of model kitchen, respectively.

• Journal of the Korean Chemical Society
• /
• v.47 no.2
• /
• pp.137-146
• /
• 2003

3-Hydroxybenzopyran[3,2-c]-[1]-benzopyran-6,7-diones (3) and 3-methoxycarbonylcoumarin (4) were prepared via condensation of 1 with resorcinol in the presence of sodium methoxide. The chemical behavior of 3 towards acetic anhydride, alkyl halides and diazonium chloride is described. The electron impact ionization mass spectra of compounds 4,5 and 6a,b show a weak molecular ion peak and a base peak of m/z 89, m/z 280. m/z 91 and m/z 120 resulting from a cleavage fragmentation respectively. The molecular ion of compounds 3, 6b, and 7a is a base peak of m/z 280, m/z 366 and m/z 488 respectively. Compound 7a give a characteristic fragmentation pattern with a two very stable fragmentation of m/z 383 and m/z 77.