• Radiation Oncology Journal
• /
• v.22 no.3
• /
• pp.165-176
• /
• 2004

Purpose: Firstly, to analyze facto in terms of radiation treatment that might potentially cause subfrontal relapse in two patients who had been treated by craniospinal irradiation (CSI) for medulloblastoma, Secondly, to explore an effective salvage treatment for these relapses. Materials and Methods: Two patients who had high-risk disease (T3bMl, T3bM3) were treated with combined chemoradiotherapy CT-simulation based radiation-treatment planning (RTP) was peformed. One patient who experienced relapse at 16 months after CSI was treated with salvage surgery followed by a 30.6 Gy IMRT (intensity modulated radiotherapy). The other patient whose tumor relapsed at 12 months after CSI was treated by surgery alone for the recurrence. To investigate factors that might potentially cause subfrontal relapse, we evaluated thoroughly the charts and treatment planning process including portal films, and tried to find out a method to give help for placing blocks appropriately between subfrotal-cribrifrom plate region and both eyes. To salvage subfrontal relapse in a patient, re-irradiation was planned after subtotal tumor removal. We have decided to treat this patient with IMRT because of the proximity of critical normal tissues and large burden of re-irradiation. With seven beam directions, the prescribed mean dose to PTV was 30.6 Gy (1.8 Gy fraction) and the doses to the optic nerves and eyes were limited to 25 Gy and 10 Gy, respectively. Results: Review of radiotherapy Portals clearly indicated that the subfrontal-cribriform plate region was excluded from the therapy beam by eye blocks in both cases, resulting in cold spot within the target volume, When the whole brain was rendered in 3-D after organ drawing in each slice, it was easier to judge appropriateness of the blocks in port film. IMRT planning showed excellent dose distributions (Mean doses to PTV, right and left optic nerves, right and left eyes: 31.1 Gy, 14.7 Gy, 13.9 Gy, 6.9 Gy, and 5.5 Gy, respectively. Maximum dose to PTV: 36 Gy). The patient who received IMRT is still alive with no evidence of recurrence and any neurologic complications for 1 year. Conclusion: To prevent recurrence of medulloblastoma in subfrontal-cribriform plate region, we need to pay close attention to the placement of eye blocks during the treatment. Once subfrontal recurrence has happened, IMRT may be a good choice for re-irradiation as a salvage treatment to maximize the differences of dose distributions between the normal tissues and target volume.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.2
• /
• pp.157-165
• /
• 1986

This experiment was conducted to find out the some physiological characteristics and nitrogen fixation activities under free-living conditions of indigenous rhizobia isolated from soybean-cultivated (30 fields) and un-cultivated (30 fields) soil. The results were summerized as follows: 1. In free-living condition, only 12.8% and 6.4% of the indigenous rhizobia isolated from soybean cultivated (133 strains) and un-cultivated (125 strains) soils were nitrogenase positive as more than 4 n mole $C_2H_4$ per tube per hour by acetylene reduction assay. 2. The acid-producing rhizobia on litmus milk test was observed to be 20% of the total 160 strains isolated from soybean cultivated soil but about 34% of 166 strains isolated from un-cultivated soil. And the serum zone positive strains were higher in the soybean un-cultivated soil than cultivated soil. 3. The population ratio of fast-to slow-growing indigenous rhizobia based on growth pattern of AMA medium was 35.6% to 64.4% of the total 346 strains. 4. The population of indigenous Rhizobium japonicum counted by MPN method was ranged from $9.2{\times}10^2$ cells per gram of soil in soybean un-cultivated soil to $2.3{\times}10^4$ cells per gram of soil soybean cultivated soil. The number of indigenous R. japonicum in 0-10cm depth of surface layer was higher than low layer.

• Journal of agricultural medicine and community health
• /
• v.1 no.1
• /
• pp.10-21
• /
• 1976

The traditional application of night soil to vegetable gardens and rice paddies results in a most wide spread condition of parasitism, with a variety of helminths found in Korea. In addition to the above fact, the peculiar habit of the consumption of raw vegetables, fish, crustaceans and mammals provides a means of infestations of helminths. During the last sixty years numerous reports were found on the prevalence of helminths amongst the Korean population in different parts of the country, and it was generally recognized that ascariasis, hookworm disease, filariasis, clonorchiasis and paragonimiasis constitute the important helminthic disease in Korea. In practical measures of parasite control activities the main measures are summarized as mass-treatment, night-soil disposal and transmission control. Among the three, the mass-treatment has been commonly applied, however, no reduction of transmission has been obtained by treatment of a population. Therefore, the ultimate eradication of parasites will depend upon the application of comprehensive environmental sanitation measures. The basic environmental measures will be concerned with (a) the safe disposal of human excreta, (b) the provision of adequate and safe water supplies in such a way as to promote a higher standard of personal hygiene in the population, and (c) the prevention of food contamination by faecal material. Additional environmental measures will deal with the improvement of housing and housing hygiene and with general community development. Community development means social and cultural as well as economic development. The control measures on the parasitic endemic diseases, such as clonorchiasis and paragonimiasis are the good examples for community health development in Korea. The control of Clonorchis and Paragonimus infections are theoretically very simple, as the infection can only invade the human body by way of encysted metacercaria which are taken into the body when eating passive intermediate hosts(fishes, crabs and crayfishes). Although prophylactic measures in the case of the infections deal with above merely consist the fishes in cooking or submerging in hot water before eating them, it is exceedingly difficult to carry out such simple measures in face of century old traditions, to which the relatively primitive population clings with great tenacity. There is no one universally applicable method of control. The choice of methods must be dictated by the nature of the environment. the habit and custom of the people. the pattern of transmission and the resources of the country. There must exist a well organized public health infrastructure. Since a control programme is of necessity on a longterm basis and continuity in its implementation is essential. An investigation should be made on the prevalence of the diseases and its relationships to irrigation engineering, freshwater ecology, agricultural methods, hydro-electric schemes, and the development of communities in affected areas. In conclusion, however. the control of clonorchiasis and paragonimiasis in Korea is not an impossible task. A combination of efforts with major emphasis on health education and mass chemotherapy coupled with governmental aid in enforcing legislative public health measures could reduce the diseases. Health education in particular attempts following four things: (a) It supplies a person with enough general knowledge about a disease to make the preventive measures. (b) It makes a person feel sufficiently about the importance of his own health to make him alter his behavior and adopt these preventive measure. (c) It makes him concerned for the health others. (d) It tries to make him feel so strongly about the first three that be supports and even initiates preventive action by the community. Educational efforts should be directed primarily toward school children because it is during the early years that most persons become infected, and also because children are less entrenched in their food habits so that, the educational process should be involved at various levels in successive changes of knowledge, attitude, beha viour, habit and custom of their lives. The most parasitic endemic diseases are related to community diseases. In caring for a sick community. the first stage is to gather epidemiological data, the next is to make inferences from it-to make the community diagnosis. The third is to prescribe community treatment or community health action part of a community health action programme. The community health action is the sum of the steps decided upon to remedy the critical features revealed by the community diagnosis. Action takes various forms; health education is the most important.

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.1
• /
• pp.9-21
• /
• 2009

Recently, the researches to explain Switching Behavior through Theory of Planned Behavior have been discovered. Many researches say that System factors of mobile telecommunication service(MTS) is positively associated with Switching Intention. But There is no difference of system factors between mobile telecommunication services because of IT technique Development. Thus, this study investigated whether switching cost and alternative's attractiveness influence switching intention concerning mobile telecommunication service by adopting Theory of Planned Behavior (TPB) as an underlying theoretical premise. The study also attempted to determine the moderating effects of personal innovativeness on switching intention. For these purposes the author has developed several hypotheses as follows: H-1. The switching cost of different MTS is associated with the attitude of MTS which is using. H-2. The switching cost of different MTS is associated with the subjective norm of MTS which is using. H-3. The switching cost of different MTS is associated with the perceived behavior control of MTS which is using. H-4. The alternative's attractiveness of different MTS is associated with the attitude of MTS which is using. H-5. The alternative's attractiveness of different MTS is associated with the subjective norm of MTS which is using. H-6. The alternative's attractiveness of different MTS is associated with the perceived behavior control of MTS which is using. H-7. The switching cost of different MTS is associated with the switching intention. H-8. The alternative's attractiveness of different MTS is associated with the switching intention. H-9. The attitude of MTS is associated with the switching intention. H-10. The subjective norm of MTS is associated with the switching intention. H-11. The perceived behavior control of MTS is associated with the switching intention. H-12. The personal innovativeness has been a moderating effects to switching intention. Data has been collected from 403 respondents for this study using a questionnaire method. The survey for the actual analysis of the research was done and analyzed with the customers who have an experience of using Mobile telecommunication service and the samples were selected among the middle and high school students who live in Seoul area, the university students who live in Seoul, Gyeonggi and Chungcheng Provinces, and the ordinary workers who are working in Seoul and Gyeonggi Province. The survey was done for 23 days from March 28, 2008 through April 12, 2008. The positive analysis was done with SPSS 12.0K statistics package and visual PLS program using the analysis techniques of frequency analysis, reliability analysis, correlation analysis and factor analysis. In addition, structural equation modeling was conducted using AMOS 5.0. The data was analyzed by frequency analysis using SPSS 12.0 and structural equation modeling using AMOS 5.0. The result of the overall model analysis is as follows: Chi-Square=378.306, d.f.=107, p-value=0.0, GFI=.904, AGFI= 0.863, IFI= 0.939, NFI= 0.917, RMSEA= 0.079, TLI= 0.922. The results of the overall model analysis were coherent. The following study results were revealed: First, switching cost was related positively to attitude, subjective norm and perceived behavior control, three components of TPB. Second, alternative's attractiveness was related negatively to subjective norm but positively to perceived behavior control. Third, switching cost and attitude was related negatively to switching intention, while perceived behavior control was related positively to switching intention. Finally, the study found the moderating effects of personal innovativeness on switching intention. Based on the results, the study offers marketing strategic implications for mobile telecommunication service industry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.169-181
• /
• 2007

Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.4
• /
• pp.265-272
• /
• 2002

Forage breeding laboratory of National Livestock Research Institute, R.D.A. has made interspecific hybrids of Lolium multiflorum $\times$ L. pratensis and intergeneric hybrids of Lolium $\times$ Festuca since 1984, and has collected ecotypes of Italian ryegrass since 1991. Growth characteristics of these hybrids and ecotypes were researched, and then these clone lines were named. Among these clone lines, the several clones that have polen fertility, high cold-tolerance, and similar heading time were used for making synthetics, Naehan 6, 7, 8, 9, with polycrossing method in 1997. Field experiments were carried out to compare the mophological and agronomical characteristics and forage productivity and quality of the synthetics with those of Italian ryegrass varieties, Barmultra and Hwasan 101. in Suwon and Yonchun from 1999 to 2000. Heading time of the synthetics were 22th to 24th May that belong to late-mature types to be similar to that of Barmultra and Hwasan 101 in Suwon. The synthetics were 101 to 106 c3n in plant length, medium or thick in thickness of stem, dark peen in leaf color, broad and long in flag leaf, strong in lodging resistance, and excellent in regrowth. Winter survivals of the synthetics were no different from that of Barmultra or Hwasan 101 in Suwon, but better than that of Barmultra or Hwasan 101 in Yonchun where was -10 to -12$^{\circ}C$ of minimum average air temperature in January or February. Dry matter(DM) yields of the synthetics were similar to DM 8,238kg per ha of Barmultra in Suwon, but in Yonchun, were more 7 to 13% than DM 7,291kg per ha of Barmultra. Forage qualities, IVDMD, ADF, NDF and TDN of the synthetics were lower than those of Hwasan 101, but higher than those of Barmultra.

• Korean Journal of Weed Science
• /
• v.3 no.1
• /
• pp.69-74
• /
• 1983

The behaviour of mixtures of herbicides was determined to obtain the basic informations about effective herbicide use, enhancing herbicidal efficacy and reducing the chemical cost. Fourteen herbicides with 91 mixed combinations were evaluated by Limpel et al method at the Echinochloa crus galli Beauv-Monochuria vaginalis Presl.-Scirpus hotarui Ohwi (importance values of these weeds were 63%, 16% and 10%, respectively) community type. Thirty eight mixed combinations showed the antagonistic response. Among these 14 mixed combinations including chlormethoxynil + naproanilide mixture were greater than 11% in antagonistic effect. On the other hand, 40 mixed combinations including chlormethoxynil + SW751 mixture showed additive response (${\pm}2%$). For synergistic response, 13 mixed combinations were belonged to this group. Particularly, 3 mixed combinations, chlormethoxynil + butachlor, chlormethoxynil + bifenox and nitrofen + ACN/MCPB/nitrofen mixtures were greater than 11% in synergistic effects. The mixture of thiobencarb + oxyfluorfen was analyzed by isobole technique. This mixture showed the synergistic response and the interaction index was approximately 2. The most optimum mixtur for inducing 90%n weed suppression was 0.012 kg ai/ha for oxyfluorfen and 0.45 kg ai/ha for thiobencarb.

• Journal of Fashion Business
• /
• v.3 no.1
• /
• pp.65-80
• /
• 1999

In this study, the researcher studied the historical background and the traditional culture about dress and ornament of Yunnan Province of China. The Results of the study are as follows. 1. In the Past, Derung's dress was very simple due to the influence of various factors, such as geography and history. Men wore shorts and covered diagonally a piece of cloth from left shoulders to right armpits and tied up the two ends on chests. Women covered crisscross two pieces of cloth from both shoulders to knee. 2. Achang people's dress and adornment has its own unique characteristic. Generally, men wear Jackets with buttons down the front and black trousers. Unmarried men like to wear white turbans, while most of married men usually wear dark blue ones. Women usually wear tight-sleeve blouses with buttons down the front and skirts. Unmarried women wear the hair in braids coil them on the top of their heads. They wear short blouses and trousers. Married women wear their hair Into buns and like to entwine black or blue cloth into high trubans. They wear short blouses and knee-length straight skirts. Achang knife enjoys high reputation and has a long history and an exquisite workmanship. All the men like to wear it. 3. The dress and adornment of the Lahu nationality has both the characteristic of farming culture and the style of nomadic culture of early times. Men usually wear short shirts with round necks and buttons down the front, loose-legged trousers, turbans or dark blue cloth caps Women's dress and adornment can be categorized into two styles. One is black cloth gown with buttons diagonally on the right front and waist-length slits on both sides. The edges of fronts and cuffs are edged with Silver ornaments and lace. They also wear trousers. The other is short blouse with round neck and short opening on th right front, straight skirt and colourful leggings with embroidered patterns. 4. The Hani people, men and women, old and young, like black colour and are fond of wearing black clothes. Men usually wear shirts with buttons down the front and trousers, entwining their heads with black or white cloth. The elderly people wear calottes. Women wear cloth blouses, skirts and trousers or shorts. Slight differences exist in the clothing and adornments according to region, branch and age 5. Blang people's dyeing technique with an exquisite method has a long history. Men wear dark blue long sleeve shirts with round necks and buttons down the front or arranged diagonally on the front and loose-legged trousers. Elderly men wear big turbans wdress and adornment varies greatly in different regions. 6. The Lisu people culture of dress and adornment has some unique characteristics. The styles and colours of their dress and adornment differ slightly from place to place. In the Nujiang area, Women wear black velvet Jackets over blouses with buttons arranged diagonally on the right front and long pleated ramie skirts. Men usually wear wraparound ramie gowns, with center vent, made of fabrics alternated with white and black cross stripes. They also wear cloth waistbands and trohile youngsters keep their hair short. Women's users. In the Lushui area, the dress and adornment is similar to that in the Nujing region, but women wear aprons and trousers instead of skirts. 7. The Nu people dress and adornment is simple but elegant Women are proficient in ramie-weaving. Men usually wear gowns With overlapping necks, knee-length trousers and leggings. They like to wear their hair long and entwine dark blue or white turbans. Women wear black and red vests over blouses with buttons arranged diagonally on the right front and ankle-length skirts. They also wear their hair long, make it into braids, and entwine dark blue or colourful cloth turbans. 8. Pumi men usually wear ramie shirts With buttons arranged diagonally on the right front, loose trousers and white sheepskin vests. Some also wear overcoats made of "pulu". Women's dress and adornment varies in different areas. In the Lanping and Weixi regions, women wear white short blouses with buttons arranged diagonally on the front and dark brown embroidered vests. They also wear trousers and blue or black cloth turbans. In the Ninglang and Yongsheng regions, women wear hemmed blouses With buttons arranged diagonally on the right front and drape sheepskin capes. They also wear white pleated skirts and use broad colourful cloth as their waistbands.

• The Korean Journal of Physiology
• /
• v.24 no.1
• /
• pp.27-37
• /
• 1990

The extrafetal transfer of $Li^{+}$ in amniotic fluid was studied in 45 pregnant rabbits. LiCl solution was administered either intravenously to mother or directly into the amniotic sac and monitored the appearance and disappearance of $Li^{+}$ in the amniotic fluid, then calculated the transfer rate of $Li^{+}$ of extrafetal origin. To study the transplacental $Li^{+}$ transfer, a solution of 150 mM LiCl was infused continuously via maternal vein (initial dose: 0.7 mmol/kg, maintaining dose: 0.03 mmol/kg/min) and the $Li^{+}$ concentration was measured in maternal blood and amniotic fluid after 60 and 120 minutes of infusion. Change in the volume of aminotic fluid was determined by Congo red dilution method at the same time. Effects of duration of gestation was not considered in this study. Extrafetal transport of $Li^{+}$ into the amniotic fluid was estimated by comparing the $Li^{+}$ concentration and volume of amniotic fluid determined before and after ligating the placental vessels. Extrafetal $Li^{+}$ transport from the amniotic fluid was determined by observing the time dependent disappearance of $Li^{+}$ and Congo red in amniotic fluid after injecting 0.5 ml solution of 15 mM or 90 mM LiCl and 50 mg/ml Congo red. Following are the results obtained: 1) During infusion of LiCl through maternal vein the ratio of the aminotic $Li^{+}$/maternal plasma $Li^{+}$ increased significantly along with the increment of fetal weight. 2) The volume of amniotic fluid of larger fetuses than 20.5 gm increased significantly during administration of LiCl while that of smaller fetuses did not change. 3) After umbilical cord ligation the $Li^{+}$ concentration of amniotic fluid of larger fetuses than 20.5 gm was decreased to $59.9{\pm}10.3%$ and $56.9{\pm}42.9%$ $(mean{\pm}S.D.)$ of those of control group after 60 and 120 minutes of LiCl infusion respectively. In amniotic fluid of smaller fetuses than 20.5 gm, there was no significant difference between control and ligation groups. 4) The disappearance rate of Congo red in the amniotic fluid was $45.2{\pm}8.2%/hr$. 5) The disappearance rate of $Li^{+}$ after intraamniotic injection of LiCl depended on the amount injected. On injecting $7.5\;{\mu}mol$ LiCl, $Li^{+}$ disappeared rapidly from the amniotic fluid and the rates after 60 min and 90 min were $97.0{\pm}2.8,\;98.5{\pm}2.0%$ respectively. On injecting $45\;{\mu}mol$ LiCl, the rates were $56.0{\pm}15.4,\;78.9{\pm}14.5%$ at 60 and 90 min. 6) From the above results it was concluded: a) $Li^{+}$ transfer into the amniotic fluid increased along with the fetal growth and one half of $Li^{+}$ influx is through the extrafetal route even after the maturation of fetal kidney. b) One half of the $Li^{+}$ transfer from the amniotic fluid was through swallowing of fetus, while the remaining half was transfered rapidly through amniotic membrane, which was concentration limited.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.157-168
• /
• 2011

Recently, the cases of freeze-thaw distress on concrete pavement in domestic have been reported periodically. Hereupon, the necessity to establish the standard of spacing factor came to the fore. The test method for analyzing spacing factor is provided in the standard of ASTM C 457. Since researchers tend to judge study results subjectively, the results should be revised throughly. Image analysis program for determining the characteristics of air-void system on hardened concrete identify air void through the difference of a color. The pixel intensity values used in this program have a significant effect on the analysis results. This study compared the automated void count by varying pixel intensity values with the manual void count in order to determine the optimum range of pixel intensity values. Also, this study analyzed the air-void characteristics on eight kinds of concrete mixtures. In this study, it was confirmed that the variation of void counted manually was around 10% from the results of round robin test, and that the optimum range of pixel intensity values is around 80~90. And it was also confirmed that air content (as a whole) was increased generally and spacing factor was decreased by increasing air-entrainer content. But some concrete mixtures showed a tendency that air content was constant and spacing factor was decreased by increasing air-entrainer content. This causes the air entrained by air-entrainer has more influence on spacing factor than air content. Also, the deviation of spacing factor by cutting position of concrete specimen was about 30~100${\mu}m$ because of the limit of 2-D image analysis. The additional study about variation of spacing factor by cutting position of concrete specimen will be performed later.