• 수산경영론집
• /
• 제45권3호
• /
• pp.85-98
• /
• 2014

This study aimed to segment Chinese fisheries consumer market by means of cluster analysis based on Shanghai region consumers. The survey is conducted to 350 shanghai people on March 17-21 in 2014 and investigate demographic characteristics and consumer's behaviors unique to each segmented market by preference, labelling, quality, price, safety. The result of cluster analysis identified four market segments such as Catering type market, Worth pursuing type market, Substance pursuing type market, Trend pursuing type market. Catering type market is a passive fisheries consumption market and is not high attractive for Korea fisheries export market. Value pursuing type market consider importance to labelling, origin, brand and require high-quality and differentiation strategies. This market's main target species are high price fisheries such as tuna, salmon, crocker. Substance pursuing type market consider fisheries's safety and quality and purchases more popular fisheries such as crocker, hairtail, promfret, mackerel, squid. Trend pursuing type market's consumers prefer to purchase brands and trendy seafood rather than taste.

• 한국분말재료학회지
• /
• 제4권2호
• /
• pp.113-121
• /
• 1997

The densification of the compacts of Co+32%Cr+20%W+l.5%C, Co+32%Cr+20%W+3.0%C and Co+32%Cr+20%W+4.5%C sintered under $H_2$ gas or vacuum was investigated. The effect of V and B addition on the densification was also investigated. The densification of these compacts were always incomplete regardless of sintering atmosphere, temperature and time. The amounts of oxygen and carbon in compacts sintered in $H_2$ for 3.6ks at 1523K were 0.105~0.160 mass% and 0.33~0.89 mass%, respectively. And those in vacuum were 0.028~0.032% and 0.957~4.08%, respectively. Relative density(Ds) of Co+29%Cr+17%W+3.0%C compact containing 6%V and Co+32%Cr+20%W+2.97%C compact containing 0.03%B were 99 and 100%, respectively, indicating complete densification by solid phase sintering. Victors hardness of sintered compacts containing 6%V or 0.03%B were 632 and 568, showing 50~60% increase in comparison to those without V or B. These results can be explained in terms of oxidation/reduction of oxides and equilibrium pressure of CO in isolated pore, instead of presence of liquid formation and grain boundary separation from pores due to large grain growth.

• 한국농공학회지
• /
• 제17권2호
• /
• pp.3763-3771
• /
• 1975

This study was attempted to investigate the changes of specific fuel consumption, compression pressure and power output, consequently to obtain basic data on farm kerosene engine. The samples which are used in this study are a 4 cycle water cooled korosene engine for the use of K6-CT83 power tiller and a 4 cycle air-cooled kerosene engine for the use of G5L-3A water pump. The Korean Industrial Standards (K.S)KS-B 6002 "Test code of small internal combustion engine" was referred in carrying out this study, and its results are as follows. 1. According to load increasing, the speific fuel consumption of the engines generally decreases, however, in case of 10% over-loading it increases. 2. As a result of full load consecutive operation, according to passing of operating time, the amount of wear generally increases, consequently the speific fuel consumption also increases, and inversly the compression pressure decreases. 3. The changes of specific fuel consumption and compression pressure were closely related with time of piston ring exchange, and periodically about 100 hours the engines show the increase of specific fuel consumption and the decrease of compression pressure. 4. After about 300 hours, although the engine had new piston rings, the specific fuel consumption increase, consequently the engine needs boring. In actual use, it is impossible to operate consecutively on full load, therefore the boring time of engine is expected to come later.

• Journal of Microbiology and Biotechnology
• /
• 제19권3호
• /
• pp.229-237
• /
• 2009

Among 12 marine bacterial strains from the China coast that exhibited interesting bioactivity (positive for both antimicrobial and cytotoxic activities), only four strains, namely, NJ6-3-1, NJ6-3-2, NB-6, and YTHM-17, had a KS domain or A domain when screened for PKS and NRPS genes using a PCR. Interestingly, two of these strains belonging to Pseudoalteromonas and associated with the marine sponge Hymeniacidon perleve were positive for both PKS and NRPS, whereas the other two strains of Pseudoalteromonas did not have a PKS or NRPS gene. A molecular phylogeny analysis and DGGE analysis of the Pseudoalteromonas sp. indicated that they had a specific affinity with the host marine sponge Hymeniacidon perleve. Furthermore, an analysis of a partial sequence of Pseudoalteromonas sp. NJ6-3-2 isolated from the marine sponge Hymeniacidon perleve obtained from genomic walking using a computational approach indicated a relatively complete PKS module including auxiliary domains (DH, KR, and Cy).

• Journal of Welding and Joining
• /
• 제21권2호
• /
• pp.97-101
• /
• 2003

The change of microstructures in the base metal during transient liquid phase bonding process of directionally Ni base superalloy, GID-111 was investigated. Bonds were fabricated using a series of holding times(0~7.2ks) at three different temperatures. The flip chip bonding utilizing self-aligning characteristic of solder becomes mandatory to meet tolerances for the optical device. In this paper, a parametric study of aging condition and pad size of samples was evaluated. A TiW/Cu/electroplated Cu UBM structure was selected and the samples were aging treated to analyze the effect of intermetallic compounds with the time variations. An FIB technique was applied to the preparation of samples for TEM observations. An FIB technique is very useful to prepare TEM thin foil specimens from the solder joint interface. After aging treatment, the tendency to decrease in shear strength was measured and the structure of the solder and the UBM was observed by using SEM, TEM and EDS. As a result, the shear strength was decreased of about 21% in the 100${\mu}{\textrm}{m}$ sample at 17$0^{\circ}C$ aging compared with the maximum shear strength of the sample with the same pad size. In the case of the 12$0^{\circ}C$ aging treatment, 18% of decrease in shear strength was measured at the 100${\mu}{\textrm}{m}$ pad size sample. An intermetallic compound of Cu6Sn5 and Cu3Sn were also observed through the TEM measurement by using.

• 한국주거학회논문집
• /
• 제17권5호
• /
• pp.47-54
• /
• 2006

This study aims to evaluate the sound insulation performance of Korean traditional paper(Hanji) windows as a material of environmental friendly building. Six types of traditional windows with 4 types of traditional window positions, were installed in l/2.5 scale model house. And then according to KS F 2235, comparative sound level differences between outdoor and indoor were measured. The main results are as follows; 1) TL(Transmission Loss) of Korean traditional paper windows, which cover one eighth of total balcony window, are ranged from 15 to 19 dB(A) in the living room and from 8 to 11 dB(A) in the balcony space. 2) TL of Korean traditional paper windows, which cover one fourth of total balcony window, are ranged from 10 to 19 dB(A) in the living room and from 8 to 10 dB(A) in the balcony space. 3) TL of Korean traditional windows with one side-one layer paper is ranged from 10 to 21 dB(A) and two side-one layer paper is 15 to 23 dB(A) and two side-two layer paper is 19 to 23 dB(A) respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.16-16
• /
• 2010

반도체 및 LCD 공정이 진행되는 진공 챔버는 유량계, 진공 펌프 및 밸브 등을 이용하여 적절한 공정용 기체와 압력을 제어하게 된다. 공정에 따라 매우 높은 온도를 유지해야 하는 경우도 있다. 챔버 내부의 압력은 유입되는 기체의 시간에 따른 유량 변화에 의하여 주기적으로 변화하게 된다. 이러한 유량 변화는 장기적으로는 결국 펌프의 신뢰성(내구수명)에 영향을 주게 되며, 특히 고유량 및 저유량을 반복하게 되는 공정에 있어서는 더욱 큰 영향을 미치게 된다. 또한 챔버 내부는 다양한 화학적 반응이 일어나며 이러한 공정 기체들의 높은 온도는 결국 챔버에 연결된 펌프의 성능 및 신뢰성에도 영향을 주게 된다. 대부분의 반도체 및 LCD 공정이 이루어지는 압력에서는 전도 및 대류의 열전달 형태보다는 열복사에 의한 영향을 받게 되어 챔버를 적절히 설계한다면 펌프에 직접적으로 전달되는 복사량은 상대적으로 낮고, 펌프에 미치는 영향도 크지 않게 된다. 그러나 압력의 변화에 따라 전도 및 대류의 영향이 커지게 되는 경우에는 펌프 자체 및 성능에 큰 영향을 주게 될 것이다. 터보형 펌프의 국내(KS) 및 국제규격(ISO)의 성능시험방법에는 이러한 온도에 따른 펌프의 성능 특성 변화를 다루고 있지 않으며, 크라이오 펌프인 경우 열복사의 영향에 대한 시험방법이 일부 공개되어 있다[J. Vac. Sci. Technol. A 17(5)]. 본 연구에서는 기체의 유량 및 온도 변화에 따른 진공 펌프의 성능 특성 변화를 고찰하고자 하며, 향후 이러한 시험방법에 대한 표준 절차를 확립하고자 한다.

• 한국식품과학회지
• /
• 제17권6호
• /
• pp.469-473
• /
• 1985

도토리묵의 관통검사와 Back Extrusion test를 실시하여 각각의 특징적인 force-distance curve를 구하였다. 관통검사시에 관여하는 compression force와 shear force의 기여도를 알기 위하여 $K{\acute{c}}$와 $K{\acute{s}}$를 계산하였다. 도토리묵의 관통에는 compression force가 훨씬 더 크게 기여하고, 도토리묵의 농도가 클수록 탐침의 지름이 커질수록 그 기여도가 더 증가하였다. Back Extrusion test에 의해 얻어지는 maximum Extrusion force는 시료량의 증감에는 변화가 없었지만, 도토리묵의 농도가 증가함에 따라서는 그 값이 증가하였다.

• 한국의류학회지
• /
• 제28권1호
• /
• pp.143-153
• /
• 2004

The Purpose of this study is provide fundamental data on a suitable sizes of ready-to-wear for women. The subjects of the survey were 300 female of 18 to 24 years old. They were measured direct anthropometry. Height, bust girth, waist girth and hip girth were grouped by KS interval. Data were analyzed by use of Cross Tab method. The results of this study were as follows. Body group of the anthropometric measurements were summed up as follows. Height was divided into 4 section(155-170), bust girth was divided into 7 section(76-94), waist girth was divided into 6 section(61-76) and hip girth was divided into 9 section(84-100). The characteristics of cross tab can be summarized as follows. Section with application ratio are 155-160cm of height, 82-85cm for bust girth, 64-70cm for waist girth and 86-94cm for hip girth. The sizes of high cover ratio of well-fitting jacket, dress, coat and one-piece was 17 sizes, well-fitting an upper garment and the whole body garment item except that was 16 sizes, and a lower garment was 21 sizes.

• Journal of Welding and Joining
• /
• 제17권6호
• /
• pp.53-61
• /
• 1999

The use of thick plate in increasing in recent years due to the rapid expansion of chemical plants, nuclear plants, ships and other industrial plants. Welding is the most popular joining techniques employed in manufacturing industrial machineries and structures. Normally, Groove shapes are prepared according to appropriate rules and regulations such as KS, JIS, AWS, LR, DNV and etc. for various thicknesses of plate. However those groove angles tend to be too large. As a result of large groove angle, residual stress, deformation of material and strength reduction is obtained. Therefore, the reliability and safety of structures and machinery tend to be decreasing. Therefore, in this paper, theoretical as well as experimental study are carried out to find optimum groove shapes for T-welded joint of mild steel. The test specimen are made in same condition with simulation model. Welding residual stresses measurement by sectional cutting method. ⅰ) The mechanical difference for change the thickness of plate and groove angle are not appeared. ⅱ) In a mechanical point of view minimum preparation angle(40°) is more suitable than maximum groove angle(60℃). ⅲ) The measurement value and distribution of welding residual stresses are not effected largely by groove angle. It is mechanical restraint that mainly affect welding residual stresses distribution. In mechanical point of view minimum groove angle is more suitable than maximum groove angle. Therefore, it is appropriate to minimize the size of groove shape in strength and safety.