• Journal of the Korean Institute of Landscape Architecture
• /
• v.16 no.1
• /
• pp.27-35
• /
• 1988

Size characteristics of three widely used landscape trees were analized to establish a methodology of size prediction as time Passes. Tree height, tree width, stem diameter(breast or surface), canopy length and tree age were measured directly and indirectly(by using photograph), and the data were analized by using regression analysis through PC-SAS. The results are summarized as follows : 1. Zelkova serrata MAKINO showed relatively slow growth rate and the tree form was changed as aged. Size predictions were available by using the regression equations listed below : Surface diameter = 0.8293 x AGE Tree height = 0.4109(0.8293 x AGE) - 0.0039(0.7273 x AGE)$^2$Tree width = 0.3240(0.8293 x AGE) - 0.0024(0.1293 x AGE)$^2$Canopy length = 0.1337(0.8293 x AGE) - 0.0020(0.7293 x AGE)$^2$2. Pinus strobus L. showed relatively fast growth rate and the tree form did not change much as aged. Size predictions were available by using the regression equations listed below. Breast diameter = 0.756 x AGE Tree height = 0.7695(0.756 x AGE) - 0.0164(0.75\ulcorner x AGE)$^2$Tree width = 0.4331(0.756 x AGE) - 0.0079(0.75\ulcorner x AGE)$^2$Canopy length = 0.1365(0.756 x AGE) - 0.0032(0.75f x AGE)$^2$ 3. In case of Magnolia denudata DESROUX, tree form was determined relatively earlier than the other two species. Si2e predictions were available by using the regression equations listed below : Surface diameter = 0.88 x AGE Tree height = 0.5412(0.88 x AGE) - 0.0110(0.88 x AGE)$^2$ Tree width = 0.3752(0.88 x AGE) - 7.0061(0.88 x AGE)$^2$Canopy length = 0.1110(0.88 x AGE) - 0.0022(0.88 x AGE)$^2$ This study aimed to find a way to predict size change of landscaping plants. This methodology will be applied to a wide range of landscape plants to provide practical data to landscape designers.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.1
• /
• pp.16-28
• /
• 2015

This study is suggested to enlarge the green area and to connect and improve the present green areas by deriving the lines of community greenway using living areas and community spaces close to the life of residence in Nam-gu. The purpose of this paper is to suggest the method of establishing greenway for the formation of community in which the residence can grow the community spirit and love their living space much more. Land-use status, green coverage ratio, and impermeability paving ratio are investigated. The community facilities are classified. The highest is educational facility, which is 7.7%, the green facility is 1.9% and the total area of community facilities which is 21.4%. The total area of Nam-gu is divided into 31 zones in total according to the administrative districts, the mail roads and reserved land of railroad and urban development. The total 20 lines of community greenway lines are chosen and the total length of lines is 18.2km. Finally, the characteristics of community greenway lines are analysed, the characteristics of community greenway lines are overall estimated according to the land-use, the street environment and the community facility. The classification system of community greenway is established on the basis on the function and purpose of greenway, the present status of land-use and the type of community facility. Based on the field investigation, the 6 greenway types are suggested considering the interconnection. The method of establishment of community greenway is suggested according to the principle of function and purpose, the principle of land-use and the principle of use of the facilities. Furthermore, the planting methods suitable to each greenway type are suggested in the building planting case of wall planting, roof planting, veranda planting, etc., and in the complex planting of parks, schools, roads, parking lots and other small areas.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.4
• /
• pp.41-54
• /
• 2020

This study was conducted to provide basic data for a transparent and fair bidding system by identifying problems and suggesting improvement measures through an analysis of the bidding status for construction projects and service-related landscaping of multi-family housing. To this end, we used the data from the "Multi-Family Housing Management Information System (K-apt)" that provides the history of apartment maintenance, bidding information, and the electronic bidding system to examine the winning bid status and amount, along with the size and trends of the winning bids by year, and the results of the selection of operators by construction type. As a result, it was found that out of the total number of successful bids (36,831), 4.4% (16,631) were in the landscaping business, and the average winning bid value was found to be about 24 million won. According to the data, 73% of the landscaping cases were valued between 3 million won and 30 million won, and 58.6% of the cases were in the field of "pest prevention and maintenance". 36% of the total number of bids were awarded from February to April, with "general competitive bidding" accounting for 59.8% of the bidding methods. As for the method of selecting the winning bidder, 55% adopted the "lowest bid" and "electronic bidding method," and 45% adopted the "qualification screening system" and "direct bidding method." As an improvement to the problems derived from the bidding status data, the following are recommended: First, the exception clause to the current 'electronic bidding method' application regulations must be minimized to activate the electronic bidding method so that a fair bidding system can be operated. Second, landscaping management standards for green area environmental quality of multi-family housing must be prepared. Third, the provisions for preparing design books, such as detailed statements and drawings before the bidding announcement, and calculating the basic amount shall be prepared so that fair bidding can be made by specifying the details of the project concretely and objectively must be made. Fourth, for various bidding conditions in the 'business operator selection guidelines', detailed guidelines for each condition, not the selection, need to be prepared to maintain fairness and consistency. These measures are believed to beuseful in the fair selection of landscaping operators for multi-family housing projects and to prepare objective and reasonable standards for the maintenance of landscaping facilities and a green environment.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.180-190
• /
• 2007

The purpose of this study was to evaluate the abrasion resistance of surface penetrating sealant which was applied on a composite resin restoration and to provide proper time to reapply sealant on composite resin surface. Two hundred rectangular specimens, sized $8\times3\times2mm$, were made of Micronew (Bisco, Inc., Schaumburg, IL, U.S.A) and divided into two groups; F group (n = 10) was finished with coarse and medium grit of Sof-Lex discs and BisCoverwas applied B group (n = 190) after finishing with discs. B group was again subdivided into nineteen subgroups From B-1 group to B-18 group were subjected to toothbrush abrasion test using a distilled water-dentifrice slurry and toothbrush heads B-IM group was not subjected to toothbrush abrasion test. Average surface roughness (Ra) of each group was calculated using a surface roughness tester (Surfcorder MSE-1700: Kosaka Laboratory Ltd., Tokyo, Japan) . A representative specimen of each group was examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using cluster analysis, paired t-test, and repeated measure ANOVA. The results of this study were as follows; 1. Ra off group was $0.898{\pm}0.145{\mu}m$ and B-IM group was $0.289{\pm}0.142{\mu}m$. Ra became higher from B-1 group $(0.299{\pm}0.48{\mu}m$ to B-18 group $(0.642{\pm}0.313{\mu}m$. 2. Final cluster center of Ra was $0.361{\mu}m$ in cluster 1 $(B-IM\simB-7)$, $0.511{\mu}m$ in cluster 2 $(B-8\simB-14)$ and $0.624{\mu}m$ in cluster 3 ($(B-15\simB-18)$. There were significant difference among Ra of three clusters. 3 Ra of B-IM group was decreased 210.72% than Ra of F group. Ra of B-8 group and B-15 group was increased 35.49% and 51.35% respectively than Ra of B-IM group. 4. On FE-SEM, B-IM group showed the smoothest resin surface. B-8 group and B-15 group showed vertically shallow scratches , and wide and irregular vertical scratches on composite resin surface respectively. Within a limitation of this study, finished resin surface will be again smooth and glazy if BisCover would be reapplied within 8 to 14 months after applying to resin surface.

• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.352-368
• /
• 2008

This study was done to evaluate the reliability of the digital color analysis system (ShadeScan, CYNOVAD, Montreal. Canada) for dentistry. Sixteen tooth models were made by injecting the A2 shade chemical cured resin for temporary crown into the impression acquired from 16 adults. Surfaces of the model teeth were polished with resin polishing cloth. The window of the ShadeScan handpiece was placed on the labial surface of tooth and tooth images were captured, and each tooth shade was analyzed with the ShadeScan software. Captured images were selected in groups, and compared one another. Two models were selected to evaluate repeatability of ShadeScan, and shade analysis was performed 10 times for each tooth. And, to ascertain the color difference of same shade code analyzed by ShadeScan, CIE $L^*a^*b^*$values of shade guide of Gradia Direct (GC, Tokyo, Japan) were measured on the white and black background using the Spectrolino (GretagMacbeth, USA), and Shade map of each shade guide was captured using the ShadeScan. There were no teeth that were analyzed as A2 shade and unique shade. And shade mapping analyses of the same tooth revealed similar shade and distribution except incisal third. Color difference (${\Delta}E^*$) among the Shade map which analyzed as same shade by ShadeScan were above 3. Within the limits of this study, digital color analysis instrument for dentistry has relatively high repeatability, but has controversial in accuracy.

• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.405-412
• /
• 2008

This study was aimed to investigate whether an oxygen inhibition layer (OIL) is essential for the interfacial bonding between resin composite layers or not. A composite (Z-250, 3M ESPE) was filled in two layers using two aluminum plate molds with a hole of 3.7 mm diameter. The surface of first layer of cured composite was prepared by one of five methods as followings, thereafter second layer of composite was filled and cured: Group 1 - OIL is allowed to remain on the surface of cured composite; Group 2 - OIL was removed by rubbing with acetone-soaked cotton; Group 3 - formation of the OIL was inhibited using a Mylar strip; Group 4 - OIL was covered with glycerin and light-cured; Group 5 (control) - composite was bulk-filled in a layer. The interfacial shear bond strength between two layers was tested and the fracture modes were observed. To investigate the propagation of polymerization reaction from active area having a photo-initiator to inactive area without the initiator, a flowable composite (Aelite Flow) or an adhesive resin (Adhesive of ScotchBond Multipurpose) was placed over an experimental composite (Exp_Com) which does not include a photoinitiator and light-cured. After sectioning the specimen, the cured thickness of the Exp_Com was measured. The bond strength of group 2, 3 and 4 did not show statistically significant difference with group 1. Groups 3 and 4 were not statistically significant different with control group 5. The cured thicknesses of Exp_Com under the flowable resin and adhesive resin were 20.95 (0.90) urn and 42.13 (2.09), respectively.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.4
• /
• pp.85-97
• /
• 2010

This study analyzed the distribution, structure and environmental condition of the vegetation of the Chionanthus retusus Lindly et Paxton community at the Wansanchielbong in the Jeonju city to offer basic data for sustainable conservation and ecological management system. And the results are as follows; 1. The average pH of soil at the community was pH 5.69 and it was slightly higher than the average of forest soil pH of Korea. But if the degree of pH will be down, it will be needed some more fertilization of Calcium. 2. The total average for contents of organism was 4.98%. And the nitrate - nitrogen content(mg/kg) of A, B, C, D quadrat was 20.29%, 28.87%, 7.65%, and 23.3% respectively. And there were good condition except quadrat C which was contaminated by amount of earth and sand. 3. The flora of the Chionanthus retusus Lindly et Paxton community was listed as 60 taxa; 37 families, 50 genera, 47 species, 10 varieties and 3 forms. The average appearance species of each Quadrat were A sector 30, B sector 26, C sector 19 and D 19 taxa respectively. 4. Surveyed woody plants in the community were as follows : Chionanthus retusus, Zelkova serrata, Quercus variabilis, Cornus walteri, Robinia pseudo-acacia and those were mixed status. And Chionanthus retusus, Zelkova serrata, Robinia pseudo-acacia, Albizzia julibrisin, Cudrania tricuspidata, Symplocos chinensis for. pilosa were mixed in mid layer trees. Herbaceous plants were founded such as Chionanthus retusus, Zelkova serrata, Robinia pseudo-acacia, Grewia parviflora, Rosa multiflora, Trachelospermum asiaticum was dominant with 35~64% in the ground cover, and Commelina communis, Calamagrostis arundinacea, Dryopteris bissetiana, Lilium lancifolium were founded also. 5. The importance values of Chionanthus retusus was 40.2% in the quadrat A1, 50.2% at quadrat A, 50.0% B1, 45.2% B2, 22.4% C1, 73.6% C2, 33.2% D1 and the total average of I.V. was 44.9%. 6. The average height of surveyed Chionanthus retusus was 5.7m and the average DBH was 12.4cm. The number of trees higher than 2m were 107 and the number of trees lower than 2m were 63. The total numbers of Chionanthus retusus were 170. 7. The age of surveyed Chionanthus retusus were analyzed 42 thru 87 years old and that of Zelkova serrata were 42, Quercus variabilis were 60, Quercus aliena were 48, Robinia pseudo-acacia were 40. 8. The number of trees with DBH 40 through 50cm were 6, and that of 30~39cm were 3, and that of 20~29cm were 16, so the total number that was over 20cm was 25. And there were 70 trees under 10cm of DBH and 63 seedlings. It will be very important data to conserve the habitat that the structure and environmental condition of the Chionanthus retusus Lindly et Paxton community at the Wansanchielbong was stable, and sustainable monitoring will be needed. Now that community is nurse forest of Jeonju City but more positive preservation plan will be needed and assigning monument of city or province also be necessary.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.3
• /
• pp.124-139
• /
• 2016

This study was carried out to characterize 127 recently developed cultivars of Rose of Sharon (Hibiscus spp.) in Korea and foreign Countries for landscape uses. The examined factors were growth characteristics such as tree height of a 1-year grafted plant(cm), plant type, growth habit, leaf characteristics such as shape and size, flower characteristics such as color, shape, size, and red eye during 2014 and 2015 for landscape uses. The results are obtained as follows; In the results of flower color of the 127 recently developed cultivars, pink color with red eye spot, white color with red eye spot, purplish red color with red eye spot, violet purple color with red eye spot, crimson color with red eye spot, asadal, blue color with red eye spot, and white color were distributed. In the flower characteristics, Hibiscus hybrid 'Daewangchun' had the largest flower size of 16.0cm out of the 127 cultivars. H. syriacus 'Antong', 'Lil Kim', and 'Ggoma' were cultivars with smaller flowers than other cultivars. H. syriacus 'Hunjang' had largest red eye, of 5.2cm of length compared to the other cultivars. The cultivars with unique flower color for landscape uses are H. syriacus 'Kwangmyung', 'Nanpa', 'North face', 'Bulsae', 'Bidan', 'Songam', 'Youngchang', 'Jukpeoso', 'Kiho', 'Tamla', 'Hwasoored' and 'Hwanhee'. These flowers had a purplish red color and were developed in Korea. H. syriacus 'Aphrodite', 'Dr. Uemoto', 'Freedom', 'Pink Cup', 'PS 80-1', 'Purpureus Variegatus', 'Red Giant', 'Woodbridge' also had unique flowers with a purplish red color and were introduced from foreign countries. In addition, cultivars with violet pink flowers were H. syriacus 'Ggoma', 'Doturak', 'Myungmi', 'Byunghwa', 'Sancheonyu', 'Taehwa', 'Hikari-hanagasa', and 'Little Kim Violet'. 'Jongmoo' and 'Ruffled Satin' had flowers with crimson color. Therefore, the new cultivars with unique flower colors were a promising cultivars to a woody landscape plant. Cultivars with large flower sizes were Hibiscus hybrid 'Daewangchun', Hibiscus hybrid 'Daemang', and Hibiscus hybrid 'Jina'. H. syriacus 'Ggoma', 'Mibeak', 'Antong', 'Lil Kim', and 'Eunhasu' had small flower sizes. Cultivars with long red eye were H. syriacus 'Hunjang' and H. syriacus 'Hi Lea Red'. Therefore, the new cultivars, Hibiscus hybrid 'Daewangchun', Hibiscus hybrid 'Daemang', Hibiscus hybrid 'Jina' with large flower sizes, H. syriacus 'Ggoma', 'Mibeak', 'Antong', 'Lil Kim', and 'Eunhasu' with small flower sizes, H. syriacus 'Hunjang' and H. syriacus 'Hi Lea Red' with long red eye, were promising cultivars to a woody landscape plant.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.310-321
• /
• 1999

In this in vitro study, confocal laser scanning microscopic morphology of dentin-resin interface and its relationship to shear bond strength were investigated after the exposed dentin surfaces were treated with 3 different kinds of dentin adhesive systems[three-step; Scotchbond Multi-Purpose Plus(SMPP), self-priming bonding resin; Single Bond(SB), self-etching primer; Clearfil Liner Bond 2(LB2)]. 52 extracted human molar teeth without caries and/or restorations. The experimental teeth were randomly divided into three groups of seventeen teeth each. In five teeth of each group, class V cavities(depth: 1.5mm) with 900 cavosurface angles were prepared at the cementoenamel junction on buccal and lingual surfaces. Bonding resins of each dentin adhesive system were mixed with rhodamine B. Primer of SMPP was mixed with fluorescein. In group 1. the exposed dentin was conditioned with etchant, applied with above primer and bonding resin of SMPP. In group 2, with etchant and self-priming bonding agent of SB. In group 3, with self-etching primer and bonding agent of LB2. After treatment with dentin adhesive systems, composite resin were applied and photocured. The experimental teeth were cut longitudinally through the center line of restoration and grounded so that about $90{\mu}m$-thick wafers of buccolingually orientated dentin were obtained. And, $70{\sim}80{\mu}m$-thick wafers sectioned horizontally, thus presenting a dentinal tubules at 900 to the cut surface of a remaining tooth, were obtained. Primer of SMPP mixed with rhodamine B was applied to these wafers. Confocal laser scanning microscopic investigations of these wafers were done within of 24 hours after treatment. To measure shear bond strength, the remaining twelve teeth of each group were grounded horizontally below the dentinoenamel junction, so that no enamel remained. After applying dentin adhesive systems on the dentin surface, composite was applied in the shape of cylinder. The cylinder was 5mm in diameter, and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. It was concluded as follows ; 1. Hybrid layer of SMPP(mean: $4.56{\mu}m$) was thicker than that of any other groups. This value was not statistically significant thicker than that of SB(mean: $3.41{\mu}m$, p>0.05), and significant thicker than that of LB2(mean: $1.56{\mu}m$, p<0.05). There was a statistical difference between SB and LB2(p<0.05). 2. Although there were variations in the length of resin tag even in a sample, and in a group, most samples in SMPP and SB showed resin tags extending above $20{\mu}m$. But samples in LB2 showed resin tags of $10{\mu}m$ at best. 3. Besides primer's infiltration into demineralized peritubular dentin and dentinal tubules, fluorophore of primer was detected in the lateral branches of dentinal tubules. 4. All groups demonstrated statistically significant differences from one another(p<0.05), with shear bond strengths given in descending order as follows: SMPP(18.3MPa), SB(16.0MPa) and LB2(12.4MPa). 5. LB2 having thinnest hybrid layer($1.56{\mu}m$) showed the lowest shear bond strength(12.4MPa).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1758-1763
• /
• 2012

This study was conducted to compare fragrance and volatile chemicals of essential oils in Gom-chewi (Ligularia fischeri) and Handaeri Gom-chewi (Ligularia fischeri var. spicifoprmis). Essential oils were extracted by steam distillation of leaves of Gom-chewi (GC) and Handaeri Gom-chewi (HGC), after which samples were collected by solid-phase micro extraction and the compositions of the essential oils were analyzed by gas chromatography-mass spectrometry (GC-MS). The yields of the essential oils in GC and HGC were 0.12% and 0.04%, respectively, and the threshold levels of the essential oils in GC and HGC were 0.01% and 0.1%, respectively. There were 19 constituents of the essential oil of Gom-chewi: 14 carbohydrates, 4 alcohols, and 1 acetate, and the major constituents were L-${\beta}$-pinene (36.02%), D-limonene (25.64%), ${\alpha}$-pinene (24.85%) and ${\beta}$-phellandrene (5.39%). In the essential oil of HGC, 25 constituents were identified: 17 carbohydrates, 4 alcohols, 3 acetates, and 1 N-containing compound, and the major constituents of HGC were D-limonene (39.74%), L-${\beta}$-pinene (35.43%) and ${\alpha}$-pinene (11.94%). The minor constituents of HGC were ${\rho}$-cymene, ${\gamma}$-muurolene, ${\gamma}$-cadinene, germacrene D, ingol 12-acetate and butyl 9,12,15-octadecatriene and nimorazole were not identified in the GC essential oil. Overall, the results showed that the fragrance and chemical compositions of essential oils in GC and HGC differed, suggesting that both essential oils could be used for the development of perfumery products.