• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.55-60
• /
• 2010

Purpose: The shrinkage of dental resin cement may cause several clinical problems such as distortion that may jeopardize the accurate fit to the prepared tooth and internal stress within the restorations. It is important to know the polymerization shrinkage-strain of dental resin cement to reduce clinical complications. The purpose of this study was to investigate the polymerization shrinkage-strain kinetics of six commercially available dental resin cements. Material and methods: Three self-cure resin cements (Fujicem, Superbond, M-bond) and three dual-cure resin cements (Maxcem, Panavia-F, Variolink II) were investigated. Time dependent polymerization shrinkage-strain kinetics of the materials were measured by the Bonded-disk method as a function of time at $23^{\circ}C$, with values particularly noted at 1, 5, 10, 30, 60, 120 min after mixing. Five recordings were taken for each materials. The data were analyzed with one-way ANOVA and Scheffe post hoc test at the significance level of 0.05. Results: Polymerization shrinkage-strain values were 3.72%, 4.19%, 4.13%, 2.44%, 7.57%, 2.90% for Fujicem, Maxcem, M bond, Panavia F, Superbond, Variolink II, respectively at 120 minutes after the start of mixing. Panavia F exhibited maximum polymerization shrinkage-strain values, but Superbond showed minimum polymerization shrinkage-strain values among the investigated materials (P < .05). There was no significant differences of shrinkage-strain value between Maxcem and M bond at 120 minutes after the start of mixing (P > .05). Most shrinkage of the resin cement materials investigated occurred in the first 30 minutes after the start of mixing. Conclusion: The onset of polymerization shrinkage of self-cure resin cements was slower than that of dual-cure resin cements after mixing, but the net shrinkage strain values of self-cure resin cements was higher than that of dual-cure resin cements at 120 minutes after mixing. Most shrinkage of the dental resin cements occurred in the first 30 minutes after mixing.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.35-43
• /
• 2010

We have developed a sodium fluoride containing gelatin and methyl cellulose gel. Cariostatic abilities of those gel were investigated and compared with APF gel and fluoride varnish($Cavityshield^{TM}$). We prepared the bovine tooth samples and divided into two surface, control side and experimental side in same specimen for exclusion of difference between specimens. The experiment was consisted of 4 groups : (I) APF gel : (II) $Cavityshield^{TM}$ : (III) Gelatin F gel : (IV) Methyl cellulose F gel Decalcification were produced by placing each specimen into artificial acidic solution(pH 4.0) for 72 hours. Surface microhardness were measured and depth of demineralization lesion were measured by polarizing light microscope. The results were as follows: 1. The difference of VHN between control and experimental side is smallest in group I (p<0.05). 2. The largest difference was shown in group II (p<0.05). 3. There were no significant difference between group III and IV in microhardness test (p>0.05). 4. The difference of lesion depth is smallest in group I (p<0.05). 5. There were no significant difference between group II, III and IV in lesion depth (p>0.05). The result of the present study indicate that the fluoride containing gelatin and methyl cellulose gel is more effective than APF gel and is similar to fluoride varnish application for prevention of demineralization.

• Journal of Radiation Protection and Research
• /
• v.18 no.2
• /
• pp.1-16
• /
• 1993

As guides to decision-making in the management of the victims in case of acute whole body or partial body radiation exposure, we studied the relationship between radiation dose and the frequency of chromosomal aberrations observed in peripheral lymphocytes that were irradiated in vitro with $^{60}Co\;{\gamma}-rays$ at doses ranging from 2Gy to 12Gy. The yields of cells with unstable chromosomal aberrations (dicentric chromosomes, ring chromosomes, and acentric fragment pairs) were 32% at 2Gy, 47% at 4Gy, 80% at 6Gy, 94% at 8Gy, and 100% at 10Gy and over. Ydr, which reflect average dose to the whole body in case of acute whole body exposure, were 1.373 at 2Gy, 0.669 at 4Gy, 1.734 at 6Gy, 2.773 at 8Gy, 3.746 at 10Gy and 5.454 at 12Gy. The relationship between radiation dose (D) and the frequency of dicentric plus ring chromosomes per cell(Ydr) could be expressed as $Ydr=9.322{\times}10^{-2}/Gy {\times}D+2.975{\times}10^{-2}/Gy^2{\times}D^2$. Qdr, which are used in estimating dose of partial body exposure and dose of past exposure, were 1.166 at 2Gy, 1.436 at 4Gy, 2.173 at 6Gy, 2.945 at 8Gy, 3.746 at 10Gy and 5.454 at 12Gy. To see how confidently this dosimetry system may be used, we obtained Qdr values from those who received one fraction of homogenous partial body irradiation of 1.BGy, 2.5Gy, and 7.OGy therapeutically; in vivo Qdr values were 1.109, 1.222 and 2.222 respectively. The estimated doses calculated from these in vivo Qdr values using the equation $Qdr=Ydr/(1- e^{-Ydr})$ were 1.52Gy, 2.48Gy, and 6.54Gy respectively, which were very close to the doses actually given.

• Journal of Aquaculture
• /
• v.13 no.2
• /
• pp.129-135
• /
• 2000

Genetic variabilities of local populations of Anthocidaris crassispina and Hemicentrotus pulcherrimus were analysed by random amplified polymorphic DNA (RAPD) technique with phenotypic variabilities in timing of gonadal maturation, reproductive output and size of individuals in Cheju. H, pulcherrimus, collected from 4 locations during March 1997, indicated that Daepo individuals were significantly smaller than that at Hamdok, Wimi site A and Wimi site B (ANOVA, p>0.001). Gonodal-somatic index (GSI) of the Wimi site B population was significantly higher than that of three other locations (ANOVA, P>0.0001). An ANOVA test conducted on test size of A. crassispina, harvested from six different locations of Cheju during June 1997, indicated that the size of individuals from Pophwan was significantly smaller (P>0.0001) than that from five other locations. GSIs of urchin m Wimi and Hanlim were significantly higher than that from Pohwan and Oedo (ANOVA, p>0.0001). Genetic similarity, calculated from k13 primer analysis of total DNA, among the six different populations of A. crassispina varied from 0.67 to 0.92, and the values for H. pulcherrimus from 0.60 to 0.73; thus there was no genetic variation among different populations of the same species. Therefore, the populations are genetically homologous and the observed phenotypic variabilities were possibly associated with water temperature and food.

• Culinary science and hospitality research
• /
• v.16 no.4
• /
• pp.124-138
• /
• 2010

This study aims to investigate the effect of hotel and restaurant employees' eating habits on their dining-out behavior. 309 workers from die hotel and restaurant companies participated in the survey, and SPSS 14.0 was used to perform frequency analyses, factor analyses, f-tests, ANOVA and multiple regression analyses. An exploratory factor analysis revealed three eating habits; unhealthy, healthy and ideal eating habits with 62.250% of the cumulative variance explained. The factor analysis included the priority on menu items, atmosphere and location of a restaurant with 60.658% of the total variance explained The results of the t-tests gave partial supports for the hypothesized gender difference in eating habits and for the hypothesis that eating habits would differ according to marital status. The result of ANOVA gave a partial support for die hypothesized age difference in eating habits. The result of the multiple regression analysis showed that all eating habits, unhealthy($\beta$=0.326, p<0.000), healthy($\beta$=0.290, p<0.000) and ideal($\beta$=0.305, p<0.000), had a significant effect on the priority on menu items. Eating habits explained 13.1% of die total variance in the importance of restaurant atmosphere and location. The influence of unhealthy eating habits was not statistically significant ($\beta$=0.002, p<0.965) while the influence of healthy($\beta$=0.309, p<0.000) and ideal eating habits($\beta$=0.189, p<0.000) was statistically significant Consequently, there was a partial support for the hypothesis that eating habits would influence die priority of restaurant atmosphere and location as a factor when dining out.

• Culinary science and hospitality research
• /
• v.16 no.4
• /
• pp.286-296
• /
• 2010

The purpose of this study is to develop fresh pasta added with mulberry leaf powder as functional fresh pasta. Through previous research, the mixture of 40% of flour and 60% of rice powder was optimum for making noodles with mulberry leaf powder. Making fresh pasta with 40% of wheat flour, 60% of rice powder (optimum moo for making noodles) and mulberry leaf powder(0.5% 1.0% 1.5% 2.0%) was done, followed by the mechanical test(moisture content, color value, texture, tension) and the sensory analysis(quantitative descriptive analysis, preference test). Moisture contents of raw pasta and cooked pasta were the highest in control; scores for moisture contents of cooked pasta were higher than those of raw pasta. The result indicated that the more mulberry leaf powder was, the lower L-value and a-value were in raw pasta and cooked pasta. While the b-vale(yellowness) of raw pasta was the highest in control(9.81), 1.0% of mulberry powder addition sample was the highest in cooked pasta. For hardness, the 2.0% of mulberry leaf powder addition sample has high scores, and adhesiveness and chewiness were no significant difference. The 0.5% of mulberry leaf powder addition sample was the longest in tension distance, which was resulted from the lack of water contents in mulberry leaf powder. In cooked pasta, tension distance had no significant difference between the samples, and force showed the highest score in control. The quantitative descriptive analysis showed that color intensity, savory taste, bitterness were the highest in the 2.0% of mulberry leaf powder addition sample. Gloss and chewiness were no significant difference between the samples. Grassy flavor, savory flavor, bitterness and grainess were intense as mulberry leaf powder was added The preference test showed that MRP 1.5 containing 1.5% of mulberry leaf powder was the most preferable for color, texture and overall quality. In conclusion, 40% of wheat flour, 60% of rice powder and 1.5% of mulberry leaf powder made the best formula of fresh pasta with mulberry leaves.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.79-92
• /
• 2000

The purpose of this study was to estimate the morphology and the size of permanent maxillary molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study. The subjects were taken impression to make study model. On the study model, authour three times measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. In the maxilary first molar's clinical crown height, mesiolingual cusp height was 6.34mm, mesiobuccal cusp height was 6.05mm, distobuccal cusp height was 5.20mm. And in the maxillary second molar's clinical crown height, mesiobuccal cusp height was 5.85mm, mesiolingual cusp height was 5.71mm, distobuccal cusp height was 5.51mm, distolingual cusp height was 3.53mm. This result considered that the maxillary first molar inclined to distobuccal, and the maxillary second molar more upright than the maxillary first molar. 2. In the width of clinical crown, the maxillary first molar was 10.43mm, the maxillary second molar was 10.20mm, and the difference between the first molar's width and the second molar's width was 0.23mm. 3. The crown thickness was measured divided into mesial buccolingual half and distal buccolingual half. The mesial buccolingual half was 11.14mm, and distal buccolingual half was 10.35mm in the maxillary first molar, and in the maxilary second molar, mesial buccolingual half was 11.25mm, and distal buccolingual half was 9.72mm. This result considered that height of convergency located in mesial half of crown. 4. In the buccal groove length, total length and ratio, the maxillary first molar was 52.5%, the maxillary second molar was 50%. And the development of buccal groove in the maxillary first molar was 59% in case of the well developed buccal groove and 41% in case of the weak developed one. And frequency of buccal pit of the maxillary first molar was 12.5%. Whereas, the frequency of buccal of the well developed buccal groove in the maxillary second molar was 37% and that of the weak developed one was 63%. And frequency of buccal pit of the maxillary second molar was not seen. 5. The 3 cusp type tooth cannot be found in the maxillary first molar and the frequency of 3 cusp type tooth in the maxillary second molar was as small as 6% 6. In the case of 4 cusp type tooth, the size of distal lingual cusp molar was difference between in the maxillary first molar and in the maxillary second molar by about 1mm. 7. The intercuspal distance was similar in the maxillary first premolar and second molar. And intercuspal distanc of mesial half of the maxillary first molar and the maxillary second molar was silmillar, too. 8. The an measurement of occlusal surface in 4 cusp type tooth showed that the angle of occlusal surface between the distobuccal and mesiolingual was an obtuse angle, and the angle of occlusal surface between mesiobuccal and distolingual was an acute angle in the both cases of maxillary first and second molar. 9. The measurements of the development of Carabelli cusp showed that the frequency of the well developed one was 7% and that of the weak developed one was 56% in the maxillary first molar. And there cannot be found the well developed one and can be found 2.5% only in the case of the weak developed one in the maxillary second molar. 10. The well developed oblique ridge in the maxillary first molar showed the 100% frequency and that in the maxillary second molar showed the 85.5% frequency. The frequency of mesiomarginal ridge tubercle in the maxillary first molar was 82% and that in the maxillary second molar was 30.5%. And the frequency of distal accessory tubercle in the maxillary first molar can be seen about 19% and that in the maxillary second molar can be seen about 12%.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.389-403
• /
• 2008

In Angle's Class III malocclusion, which has higher incidence in Korean than Western, depressed midfacial profile with protruded lower lips and mandible may give rise to many functional, esthetic, psychological, social problems. Due to the different malocclusion incidence according to racial differences, many previous studies focused on the relationship between Class II malocclusion and nasal airway obstruction. Previous studies used lateral cephalography which has limitations of 2 dimensional image with projection error and identification error. Therefore, the purpose of this study was to analyze morphologic differences in the nasal airway between normal occlusion and Angle's Class III malocclusion patients using 3-dimensional facial computed tomography. Thirteen normal occlusion(7 men and 6 women) and sixteen skeletal Class III(7 men and 9 women) patients were selected and 3-dimensional facial computed tomography taking was performed. Comparison between two group in volume and sectional area of nasal airway were carried out. The results were followed. 1. In the comparison of absolute nasal airway volume, oropharyngeal space of experimental group were larger than control group but there are no significant difference in other. 2. In the comparison of relative nasal airway volume, oropharyngeal space of experimental group were larger than control group but there are no significant difference in other. 3. In the oropharyngeal space width on frontal and lateral view, the similar tendency was revealed between two groups. 4. In the lateral curvature of nasal airway, the similar tendency was revealed between two groups.

• Clinical and Experimental Reproductive Medicine
• /
• v.11 no.1
• /
• pp.17-32
• /
• 1984

There are numerous reports on the relative risk of pelvic inflammatory disease among the users versus the nonusers of intrauterine device. Reported relative risk varied from no difference between the two groups to 3-9 fold increase in the users. In an attempt to define this relative risk of pelvic inflammatory disease and related microorganisms ,pelvic organ observation and bacteriological study were done through laparoscopy. Specimens for microbiologic culture were obtained simultaneously from the fallopian tubes via laparoscopy and from the endocervix via regular pelvic examination method. The study population was consisted of 30 I.U.D.users and 35 J.U.D.nonusers who visited the Yonsei University Severance Hospital and the Sung-Ga Hospital for laparoscopic sterilization. The results obtained were as follows: 1. There was no difference in age distribution, economic status and numbers of parity and abortion between I.U.D. users and I.U.D. nonusers. 2. The pelvic inflammatory findings were noted on laparoscopy in 2 cases of I.U.D. users, with an incidence of 6.6%. And no pelvic inflammatory finding was noted in any of the nonusers,but this difference was not statistically significant (p>0.005). 3. All the bacteriologic culture of the specimens from the fallopian tubes of both groups yielded negative results. 4. The bacteriologic culture of the spec imens f rom the endocervix revealed more frequent isolation of possible pathogen such as Hem ophilus ,alpha-Streptococcus ,Corynebacteria, Bacteroides in the I.U.D.users than in the nonusers.But,this difference was also not statistically significant (p>0.005).

• Clinical and Experimental Reproductive Medicine
• /
• v.34 no.2
• /
• pp.125-131
• /
• 2007

Objective: The aim of this study was to compare GnRH antagonist and agonist flare-up treatment in the management of poor responder patients. Methods: One hundred forty-four patients from Jan. 1, 2002 to Aug. 31, 2005 undergoing IVF/ICSI treatment who responded poorly to the previous cycle (No. of oocyte retrieved$\leq$5) and had high early follicular phase follicle stimulating hormone (FSH>12 mIU/ml were selected. Seventy-five patients received agonist flare-up protocol and 71 patients received antagonist protocol. We analyzed the number of oocytes retrieved, number of good embryos (GI, GI-1), total dose of hMG administered, implantation rate, cycle cancellation rate, pregnancy rate, live birth rate. Results: The cancellation rate was high in antagonist protocol (53.5% vs. 30.1%). The number of oocyte retrieved, the number of good embyos were high in agonist flare-up group. There was no statistical difference between GnRH agonist flare up protocol and GnRH antagonist protocol in implantation rate (14.5%, 10.1%), clinical pregnancy rate per transfer (29.4%, 21.2%) and live birth rate per transfer (21.6%, 18.2%). Although the result was not statistically significant, GnRH agonist flare up group showed a nearly doubled pregnancy rate and live birth rate per initial cycle than GnRH antagonist group. Conclusions: The agonist flare-up protocol appears to be slightly more effective than the GnRH antagonist protocol in implantation rate, pregnancy rate, live birth rate but shows statistically no significance. Agonist flare-up protocol improved the ovarian response in poor responders. However, based of the result of the study, we can expect improved ovarian response in poor responders by GnRH agonist flare up protocol.