• Microbiology and Biotechnology Letters
• /
• v.47 no.4
• /
• pp.530-535
• /
• 2019

Diverse types of nuruks (traditional Korean fermentation initiators) were examined in order to isolate thermotolerant yeast strains capable of utilizing xylose as a carbon source. Among twenty yeast strains that grew at 46℃, MBY/L1597 showed a notably higher specific growth rate than other strains. This strain was identified as Millerozyma farinosa. While the control strain M. farinosa KCTC27412 (= CBS7064) did not show xylose reductase (XR) activity and apparent growth at 46℃, M. farinosa MBY/L1597 exhibited XR activity of 4.98 ± 0.49 U/mg protein when NADPH was used as a cofactor. M. farinosa MBY/L1597 cultured at 46℃ produced (9.87 ± 1.00 g/l) xylitol from 20 g/l xylose, corresponding to approximately 50% yield. M. farinosa MBY/L1597 was deposited at the Korean Collection for Type Cultures as KCTC27797.

• Journal of architectural history
• /
• v.18 no.1
• /
• pp.31-49
• /
• 2009

Periodically, the Japanese Castle was created in the domestic of Japan and then 2 Invasions into Chosun was started. The Japanese Castle in the domestic of Japan was repaired several times by the building boom of castle before & after 2 invasions and so the initially-built type of castles was changed. Accordingly, there are much difficulties to understand the original shape of Japanese Castle. Through the Japanese Castle within Korea called as the fossil of Japanese Castle, I would like to examine & consider its building period and characteristics. The terminology called as [Two Side Stone's Wall] is that of castle which is not acknowledged in the Japanese Academic Circles. However, it means the two-fold wall of Japanese Castle which was widely applied to the fortification way in the Age of Japan Edo. The terminology of [Sori] says the stonework curve in the corner of Japanese Castle which is indicated best in the Japanese Castle. It calls the curve as like the fan frame. [Curb Stone's Wall] says the type of castle wall constructed with over 1 face in wall body of Japanese Castle. (1) About classifying the construction period of Japanese Castle, the curb stone's wall and the castle having no two side stone's wall must consider the building period as that of Japanese Invasion of Korea in 1592. If there was [Sori], the two-side stone's wall was used and the place which supported the documentary data, in particular, the place having the record of contraction is considered to be confirmed as the castle constructed in the period of Japanese Invasion of Korea in 1597. (2) The two-side-type stone's wall shown in the Modern Japanese Stone Castle is difficultly considered to be generated from the Japanese Castle at the period of Japanese Invasion of Korea in 1592 and in 1597. (3) The beautiful [Sori] shown in the Modern Japanese Stone Castle was started from the Japanese Castle of Korea at the period of Japanese Invasion of Korea in 1597. It is difficultly considered which its indication was firstly generated by the Chaesung-Folded Segment Structure.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.4
• /
• pp.203-206
• /
• 2010

We examined five astronomical variables formulas of the two conventional harmonic prediction programs (IOS tidal package (IOS) and Task-2000 tidal package (Task2K)) in relation to hindcast of paleo-tides and -tidal currents on historical navel battlefields such as Myeongryang Naval Battle (September 16th, 1597 according to the lunar calendar). Through the comparison of the resultant values in a certain time (00:00 January 1) of each year (1801, 1800 and 1597) calculated from the two different formulas, we understood that the reason why Task2K is incapable of hindcating them in pre-19th century, Specifically, we found that the Task2K formulas directly using the Gregorian calendar date did not identify leap years in calculating astronomical variables beyond the period of 1801-2099. Therefore, the IOS's formulas, which use the day number referenced on midnight 1/1/0000, are recommended for use in hindcasting paleo-tides and -tidal currents on historical navel battles in pre-19th century.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1597-1602
• /
• 2012

In this study, we determined the 3D-structure of Arabidopsis thaliana KAPAS by homology modeling. We then investigated the binding mode of compounds obtained from in-house library using computational docking methods. From the flexible docking study, we achieved high dock scores for the active compounds denoted in this study as compound $\mathbf{3}$ and compound $\mathbf{4}$. Thus, we highlight the flexibility of specific residues, Lys 312 and Phe 172, when used in active sites.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.8
• /
• pp.1597-1600
• /
• 2008

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1597-1602
• /
• 2010

Sarkar et al. proposed a new Cellular Automata(CA) based security scheme providing both authentication and confidentiality. The application of CA for designing the scheme makes it suitable for hardware implementation. But the proposed method by Sakar dt al. has some problems. In this paper, we analyze CA and give a method for detecting secret key.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1597-1609
• /
• 2015

This paper introduces the fundamentals of the conventional LC low-pass filter circuit in the fractional domain. First, we study the new fundamentals of fractional-order LC low-pass filter circuit including the pure real angular frequency, the pure imaginary angular frequency and the short circuit angular frequency. Moreover, sensitivity analysis of the impedance characteristics and phase characteristics of the LC low-pass filter circuit with respect to the system variables is studied in detail, which shows the greater flexibility of the fractional-order filter circuit in designs. Furthermore, from the filtering property perspective, we systematically investigate the effects of the system variables (LC, frequency f and fractional orders) on the amplitude-frequency characteristics and phase-frequency characteristics. In addition, the detailed analyses of the cut-off frequency and filter factor are presented. Numerical experimental results are presented to verify the theoretical results introduced in this paper.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.11
• /
• pp.1597-1604
• /
• 2002

In this study, numerical investigation has been performed on the impingement, spreading and solidification of a coating material droplet impacting onto a solid substrate in the thermal spray process. The numerical model is validated through the comparison of the present numerical result with experimental data fer the flat substrate without surface defects. An analysis of deposition formation on the non-polished substrate with surface defects is also performed. The parametric study is conducted with various surface defect sizes and shapes to examine the effect of surface defects on the impact and solidification of the liquid droplet on the substrate.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1597-1603
• /
• 1995

A prediction model on forward slip has been developed for presetting rolling speed of each finish mill stand in the continuous hot strip roduction. Those factors such as neutral point, friction coefficient, volume fractions undergoing width spread, shape of deformation zone at each side of entry and delivery of the rolls were taken into account. To reduce the speed unbalance between adjacent stands a refining method of adjusting friction coefficient has also been developed. On-line application of the model showed a good agreement in rolling speeds between the predictions and the actual measurements, and gave an outstanding improvement in the travelling stability of strip passing through the finishing mill train.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.10
• /
• pp.1597-1604
• /
• 2001

Alternative computational scheme is presented fur reliability based optimal design using a modified advanced first order second moment (AFOSH) method. Both design variables and design parameters are considered as random variables about their nominal values. Each probability constraint is transformed into a sub -optimization problem and then is resolved with the modified Hasofer- Lind-Rackwitz-Fiessler (HL-RF) method for computational efficiency and convergence. A method of design sensitivity analysis for probability constraint is presented and tested through simple examples. The suggested method is examined by solving several examples and the results are compared with those of other methods.